1. บทนำ
This manual provides instructions for the installation, operation, and maintenance of the Okin DeltaDrive Linear Actuator Motor, Model 1.28.000.110.30. This motor is specifically designed to operate the lift mechanism in power recliners and lift chairs, facilitating smooth extension and retraction.
Image: Okin DeltaDrive Linear Actuator Motor, showing the main body, connecting cables, and pin connectors.
2. ข้อมูลด้านความปลอดภัย
- Always disconnect power from the recliner or lift chair before attempting any installation, maintenance, or troubleshooting procedures.
- Ensure all electrical connections are secure and correctly oriented to prevent electrical hazards or damage to the unit.
- Keep hands, fingers, and loose clothing clear of all moving parts during operation to avoid injury.
- This device operates on electrical power. Do not expose the motor or its connections to water or excessive moisture.
- ห้ามดัดแปลงมอเตอร์หรือชิ้นส่วนใดๆ โดยไม่ได้รับอนุญาต การดัดแปลงโดยไม่ได้รับอนุญาตอาจทำให้การรับประกันเป็นโมฆะและก่อให้เกิดความเสี่ยงด้านความปลอดภัย
3. เนื้อหาบรรจุภัณฑ์
- 1 x Okin DeltaDrive Linear Actuator Motor (Model 1.28.000.110.30)
4. คำแนะนำในการติดตั้ง
Follow these steps carefully to install the Okin DeltaDrive Linear Actuator Motor:
- การตระเตรียม: Ensure the power recliner or lift chair is unplugged from the wall outlet. Position the chair to allow safe and easy access to the existing actuator motor.
- Removal of Old Actuator:
- Locate the existing actuator motor under the chair.
- Disconnect the 5-pin connector from the hand control and the 2-pin connector from the power transformer.
- Carefully remove any cotter pins, bolts, or fasteners securing the old actuator to the chair frame.
- Remove the old actuator from the chair.
- Installation of New Actuator:
- Position the new Okin DeltaDrive Linear Actuator Motor in the same location and orientation as the old unit.
- Secure the new actuator to the chair frame using the appropriate cotter pins, bolts, or fasteners. Ensure it is firmly attached and moves freely without obstruction.
- Connect the 5-pin connector from the hand control to the corresponding port on the new motor. Ensure the connection is snug and fully inserted.
- Connect the 2-pin connector from the power transformer to the corresponding port on the new motor. Ensure the connection is snug and fully inserted.
- การทดสอบ: Plug the power recliner or lift chair back into the wall outlet. Test the functionality of the chair using the hand control to ensure the actuator extends and retracts smoothly and completely in both directions.
5. คู่มือการใช้งาน
The Okin DeltaDrive Linear Actuator Motor is controlled via the chair's existing hand control unit. Operation is straightforward:
- To extend the footrest or recline the chair, press and hold the appropriate button on the hand control.
- To retract the footrest or return the chair to an upright position, press and hold the corresponding button on the hand control.
- For lift chairs, use the hand control to raise or lower the chair as intended.
- Release the button when the desired position is reached. The motor will stop movement.
6. การบำรุงรักษา
Proper maintenance ensures the longevity and optimal performance of your actuator motor:
- การทำความสะอาด: Wipe the exterior of the motor with a clean, dry cloth. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the components.
- การตรวจสอบ: Periodically inspect all cable connections for signs of wear, fraying, or damage. Ensure all mounting hardware remains secure and tight.
- การหล่อลื่น: This unit is designed for maintenance-free operation and does not require external lubrication. Do not attempt to lubricate internal components.
7 การแก้ไขปัญหา
If you encounter issues with your Okin DeltaDrive Linear Actuator Motor, refer to the table below for common problems and solutions:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| มอเตอร์ไม่ทำงาน. | ไม่มีแหล่งจ่ายไฟ Loose or incorrect connections. Faulty hand control or power transformer. |
|
| Motor operates in only one direction. | Incorrect wiring of the 5-pin connector or faulty hand control. |
|
| Motor makes unusual noises (grinding, clicking). | Obstruction in the mechanism or internal mechanical issue. |
|
8. ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| หมายเลขรุ่น | 1.28.000.110.30 |
| ยี่ห้อ | โอกิน |
| ขนาดสินค้า | ลึก 22 นิ้ว x กว้าง 6 นิ้ว x สูง 4 นิ้ว |
| น้ำหนักสินค้า | 4.5 ปอนด์ |
| สี | สีดำ |
| ยูพีซี | 617762077555 |
| การเชื่อมต่อ | 5-pin connector for hand control, 2-pin connector for power transformer |
| การเปลี่ยนที่เข้ากันได้ | 9.28.000.046.30, 9.28.000.058.30, 9.28.000.070.30, 9.28.000.073.30, 9.28.000.092.30, 9.28.000.104.30, 9.28.000.106.30, 9.28.000.111.30, 9.28.000.117.30, 9.28.000.129.30, 9.28.000.136.30, 1.22.000.568.30, 1.22.000.651.30, 1.22.000.679.30, 1.28.000.013.30, 1.28.000.015.30, 1.28.000.050.30, 1.28.000.002.59, 1.28.000.074.30, 1.28.000.086.30, 1.28.000.093.30, 1.28.000.095.30, 1.28.000.108.30, 1.28.000.122.30, 1.28.000.131.30, 1.28.000.132.30, 1.28.000.164.30 |
9. การรับประกันและการสนับสนุน
For detailed warranty information, please refer to the original product packaging or the documentation provided at the time of purchase. For technical support, replacement parts, or further assistance, please contact Okin customer service directly through their official webเว็บไซต์หรือตัวแทนจำหน่ายที่ได้รับอนุญาต
