Aeotec WallMote Quad Z-Wave Plus Wireless Switch User Manual

1. บทนำ

1.1 ผลิตภัณฑ์เกินview

The Aeotec WallMote Quad is a versatile Z-Wave Plus wireless switch designed for smart home automation. It functions as both a wall-mounted switch and a portable remote control. Featuring four touch-sensitive buttons, it allows control of up to 16 different Z-Wave scenes or devices. The WallMote Quad is powered by a rechargeable battery and utilizes Aeotec's Gen5 technology for reliable performance.

Image: The compact WallMote Quad held in a hand, highlighting its portable design.

1.2 อะไรอยู่ในกล่อง

• WallMote Quad device
• แผ่นยึดด้านหลัง
• เทปสองหน้า
• สายไมโคร USB

2. ข้อมูลด้านความปลอดภัย

Please read this manual carefully before attempting to install or operate the WallMote Quad. Failure to follow the instructions may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and seller will not be held responsible for any loss or damage resulting from non-compliance with the instructions in this manual or from improper handling.

• ควรเก็บอุปกรณ์ให้ห่างจากเปลวไฟและอุณหภูมิที่สูงจัด
• อย่าพยายามถอดประกอบหรือดัดแปลงอุปกรณ์
• Ensure the device is charged using the provided Micro USB cable or a compatible charger.
• อุปกรณ์นี้มีไว้สำหรับใช้ภายในอาคารเท่านั้น

3. การตั้งค่า

3.1 Charging the WallMote Quad

Before initial use, fully charge your WallMote Quad using the supplied Micro USB cable. Connect the cable to the Micro USB port on the device and to a USB power source. A full charge typically provides approximately 3 months of battery life, depending on usage.

3.2 ตัวเลือกการติดตั้ง

The WallMote Quad offers flexible mounting options:

• ติดผนัง: Use the provided back-mount plate and double-sided tape to affix the WallMote Quad to a wall. The device attaches magnetically to the back-mount plate, allowing for easy removal.
• Portable Remote: The WallMote Quad can be used as a handheld remote control, easily detached from its magnetic wall mount.

Image: The WallMote Quad seamlessly integrates into different home environments, functioning as both a wall switch and a portable remote.

3.3 การเชื่อมต่อกับฮับ Z-Wave

To integrate the WallMote Quad into your smart home system, it must be paired with a compatible Z-Wave gateway or hub. Compatible hubs include SmartThings, Zipabox, Hubitat, Indigo 7, and Homey. Refer to your Z-Wave hub's instructions for specific pairing procedures. Generally, this involves putting your hub into inclusion mode and then activating the WallMote Quad's pairing function (often by pressing a button on the device).

Image: The WallMote Quad wirelessly communicating with a Z-Wave hub, enabling smart home control.

4. คู่มือการใช้งาน

4.1 ฟังก์ชันปุ่ม

The WallMote Quad features four touch-sensitive buttons, each capable of controlling Z-Wave devices or activating scenes. Each button can be programmed for multiple actions:

• แตะครั้งเดียว: Activates a programmed scene or controls a device.
• กดค้างไว้: Triggers a different action or scene.
• Slide (if supported by hub): Some Z-Wave hubs may support slide gestures across the buttons for additional control. Refer to your hub's documentation for compatibility.

The WallMote Quad can control up to 16 different Z-Wave scenes, with each scene potentially managing multiple devices. Program these actions through your Z-Wave hub's interface.

Image: A finger interacting with one of the touch-sensitive buttons on the WallMote Quad.

4.2 ตัวชี้วัดผลตอบรับ

The device provides feedback through:

• Haptic Feedback (Vibration): A subtle vibration confirms button presses or actions.
• ไฟแสดงสถานะ LED: A multi-color LED provides visual status updates.
• เสียงบี๊บ: The device can emit an audible beep to confirm actions. This feature can often be configured or disabled via your Z-Wave hub.

5. การบำรุงรักษา

5.1 การชาร์จแบตเตอรี่

When the battery level is low, the LED indicator will signal the need for recharging. Connect the WallMote Quad to a USB power source using the Micro USB cable. The device can be used while charging.

5.2 การทำความสะอาด

To clean the WallMote Quad, gently wipe its surface with a soft, dry, or slightly damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the device.

6 การแก้ไขปัญหา

6.1 ปัญหาทั่วไป

• อุปกรณ์ไม่จับคู่: Ensure your Z-Wave hub is in inclusion mode and the WallMote Quad is within range. You may need to perform multiple "wake-ups" by pressing the action button on the back of the device to ensure full pairing, especially with battery-powered Z-Wave devices.
• Slider function not working: The slider function's availability depends on your specific Z-Wave hub and its driver support. Verify if your hub supports this feature and if the necessary drivers are installed.
• Misinterpreting button presses: Ensure firm and distinct presses. If issues persist, check for firmware updates for your Z-Wave hub or the WallMote Quad, if available.
• LED or beep feedback issues: The LED feedback is typically always enabled and blue. Audible beeps can often be configured or disabled through your Z-Wave hub's settings.

6.2 การรีเซ็ตอุปกรณ์

To perform a factory reset on the WallMote Quad, consult the specific instructions provided by Aeotec or your Z-Wave hub's documentation. A factory reset will remove the device from your Z-Wave network and restore it to its default settings.

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

For warranty information and technical support, please refer to the official Aeotec webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง เก็บใบเสร็จรับเงินไว้เพื่อใช้ในการเคลมประกัน

Aeotec Official Webเว็บไซต์: aeotec.คอม