Genasun GV-5-Pb-12V

Genasun GV-5-Pb-12V MPPT Solar Charge Controller for 12V Lead-Acid Batteries - Instruction Manual

Model: GV-5-Pb-12V | Brand: Genasun

1. สินค้าหมดview

The Genasun GV-5-Pb-12V is a high-speed Maximum Power Point Tracking (MPPT) solar charge controller designed for 12V lead-acid batteries. It features a 5A charging current and a 5A DC load output with Low Voltage Disconnect (LVD). This controller is built for efficiency and durability, offering advanced electronic protections and a multi-stage ชาร์จโปรfile to optimize battery health and lifespan.

  • Max. recommended panel power: 65 W
  • กระแสไฟชาร์จ: 5A
  • มัลติ-เอสtage ชาร์จโปรfile for Lead-Acid batteries
  • High-Speed MPPT: 15 Hz (15 times per sec.) tracking speed
  • ประสิทธิภาพสูงสุด: 99.85%
  • Tiny night consumption: 0.125 mA
  • DC Load Output: 5 A with LVD (low voltage ตัดการเชื่อมต่อ)
  • Advanced electronic protections for reverse panel and battery polarity
  • รับประกัน 10 ปี
  • Made in the USA, conform to CE, FCC, RoHS
วิดีโอ 1: การแกะกล่องและอื่นๆview of the Genasun GV-5 Buck MPPT charge controller, highlighting its features, specifications, and applications. This video provides a comprehensive introduction to the product.
Comparison table of Genasun GV-5 features versus other controllers
Figure 1: A comparison table illustrating the superior features of the Genasun GV-5, such as MPPT tracking speed, efficiency, trickle charge capability, low self-consumption, and radio frequency silence, compared to other controllers.

2. ข้อมูลด้านความปลอดภัย

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the unit, battery, or solar panel, and may void the warranty. Ensure all connections are secure and correct polarity is observed.

  • Always connect the battery to the charge controller FIRST.
  • Always disconnect the solar panel from the charge controller FIRST before disconnecting the battery.
  • Ensure proper ventilation around the charge controller.
  • Do not expose the controller to water or excessive moisture unless it is a waterproof model.
  • ควรใช้ขนาดสายไฟที่เหมาะสมสำหรับการเชื่อมต่อทั้งหมดเพื่อป้องกันความร้อนสูงเกินไป

3. การตั้งค่าและการติดตั้ง

Follow these steps for proper installation of your Genasun GV-5-Pb-12V solar charge controller.

3.1 แผนผังการเดินสายไฟ

Wiring diagram for Genasun GV-5 solar charge controller
Figure 2: Wiring diagram showing connections for solar panel, battery, and DC load to the Genasun GV-5 controller. The multicolor LED indicates operational status.

This diagram illustrates the correct connection sequence for your solar panel, battery, and optional DC load. Ensure positive (+) and negative (-) terminals are correctly matched.

3.2 ขั้นตอนการเชื่อมต่อ

  1. เชื่อมต่อแบตเตอรี่: First, connect the battery to the charge controller. Ensure correct polarity (positive to positive, negative to negative). The controller will power on and display the battery voltage.
  2. เลือกประเภทแบตเตอรี่: If your controller has a battery type selection feature, press and hold the leftmost button until the battery type indicator flashes. Select the appropriate battery type (e.g., Lead-Acid, AGM, Gel). For Lead-Acid batteries, selecting AGM is often suitable.
  3. เชื่อมต่อแผงโซล่าเซลล์: Next, connect the solar panel to the charge controller. Ensure correct polarity. The controller will begin charging the battery if sufficient solar power is available.
  4. เชื่อมต่อโหลด DC (ไม่จำเป็น): If using the optional DC load output, connect your DC load (e.g., lights, fan) to the LOAD terminals. The controller's Low Voltage Disconnect (LVD) feature will protect the battery from over-discharge.

3.3 คู่มือการติดตั้งแบบภาพ

Video 2: A step-by-step guide demonstrating the connection method for a solar charge controller to a battery, optional mobile phone charging, and a solar panel. This video provides a clear visual aid for the installation process.
Video 3: This video illustrates the wiring process for a solar charge controller, showing how to connect the battery, solar panel, and DC load. It serves as a helpful visual reference for correct wiring.

4. คู่มือการใช้งาน

Once correctly installed, the Genasun GV-5-Pb-12V operates automatically. The multicolor LED provides status indications:

  • ไฟ LED สีเขียว: Indicates normal operation and charging status.
  • ไฟ LED สีแดง: Indicates an error or fault condition. Refer to the troubleshooting section for details.
  • ปริมาณแบตเตอรี่tagอี แสดงผล: The integrated display shows the current battery voltage, allowing you to monitor the charge level.

The MPPT technology continuously tracks the maximum power point of your solar array to ensure optimal charging efficiency, even in varying light conditions.

5. การบำรุงรักษา

To ensure optimal performance and longevity of your Genasun GV-5-Pb-12V solar charge controller, follow these maintenance guidelines:

  • การตรวจสอบปกติ: ตรวจสอบการเชื่อมต่อสายไฟทั้งหมดเป็นระยะ เพื่อให้แน่ใจว่าแน่นสนิทและปราศจากสนิม
  • การทำความสะอาด: Keep the controller clean and free from dust, dirt, and debris. Use a dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
  • การระบายอากาศ : Ensure the area around the controller is well-ventilated to prevent overheating.
  • สุขภาพแบตเตอรี่: Regularly check your battery's condition as per the battery manufacturer's recommendations.

6 การแก้ไขปัญหา

If you encounter issues with your Genasun GV-5-Pb-12V, refer to the following common troubleshooting tips:

  • ไม่มีการชาร์จ:
    • Check all solar panel connections for correct polarity and secure fit.
    • ตรวจสอบให้แน่ใจว่าแผงโซลาร์เซลล์ได้รับแสงแดดเพียงพอ
    • Verify the battery is properly connected and has sufficient voltage (above the minimum operating voltagจ).
  • ไฟ LED แสดงสถานะสีแดง:
    • A red LED typically indicates a fault. Check for reverse polarity on either the solar panel or battery connections.
    • ตรวจสอบให้แน่ใจว่าระดับแบตเตอรี่tage is within the acceptable range for the controller.
    • Check for short circuits on the load output.
  • โหลดไม่ทำงาน:
    • Check connections to the DC load output.
    • ตรวจสอบปริมาณแบตเตอรี่tage อยู่เหนือระดับ Low Voltage Disconnect (LVD) threshold. The controller will automatically reconnect the load once the battery voltagอีฟื้นตัว
    • Ensure the load current does not exceed 5A.

If problems persist, contact Genasun customer support for assistance.

7. ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
หมายเลขรุ่นGV-5-Pb-12V
พลังงานแผงสูงสุดที่แนะนำ65 วัตต์
กระแสไฟชาร์จ5 ก
ประเภทแบตเตอรี่12 V Lead-Acid Batteries
MPPT Tracking Speed15 Hz (15 times per sec.)
ประสิทธิภาพสูงสุด99.85%
การบริโภคในเวลากลางคืน0.125มิลลิแอมป์
เอาท์พุตโหลด DC5 A with LVD
อุณหภูมิในการทำงาน-40°C ถึง 85°C
ขนาดสินค้า4.3 x 2.2 x 0.9 นิ้ว
น้ำหนักสินค้า2.88 ออนซ์
การรับรองCE, FCC, RoHS
Genasun GV-5-Pb-12V solar charge controller with specifications
Figure 3: The Genasun GV-5-Pb-12V solar charge controller, highlighting its compact design and key features. This image provides a visual representation of the product.

8. การรับประกัน

The Genasun GV-5-Pb-12V MPPT Solar Charge Controller comes with a รับประกัน 10 ปี. This warranty covers defects in materials and workmanship under normal use and service conditions. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official Genasun webไซต์หรือติดต่อฝ่ายสนับสนุนลูกค้า

9. การสนับสนุน

For further assistance, technical support, or warranty inquiries, please visit the official Genasun website or contact their customer service department. You can find more information and resources at www.genasun.com.

เอกสารที่เกี่ยวข้อง - GV-5-Pb-12V

พรีview คู่มือ Genasun GV-5-MOD: ตัวควบคุมการชาร์จพลังงานแสงอาทิตย์แบบ MPPT
คู่มือฉบับสมบูรณ์สำหรับตัวควบคุมการชาร์จพลังงานแสงอาทิตย์ Genasun GV-5-MOD Maximum Power Point Tracking (MPPT) ครอบคลุมการติดตั้ง การเชื่อมต่อไฟฟ้า คำแนะนำด้านความปลอดภัย การแก้ไขปัญหา ไฟแสดงสถานะ และข้อมูลจำเพาะโดยละเอียดสำหรับแบตเตอรี่หลากหลายประเภทและรุ่น
พรีview Genasun GV-5-MOD Manual: Solar Charge Controller with Maximum Power Point Tracking
Comprehensive user manual for the Genasun GV-5-MOD MPPT solar charge controller, covering installation, electrical connections, troubleshooting, specifications, and safety instructions for various battery types.
พรีview คู่มือการเดินสายและการตั้งค่าตัวควบคุมการชาร์จพลังงานแสงอาทิตย์ MPPT รุ่น Y&H SY Series
คู่มือฉบับสมบูรณ์เกี่ยวกับการเดินสายและการตั้งค่าตัวควบคุมการชาร์จพลังงานแสงอาทิตย์ MPPT รุ่น Y&H SY ครอบคลุมถึงการเชื่อมต่อแบตเตอรี่ การเชื่อมต่อแผงโซลาร์เซลล์ การเชื่อมต่อโหลด และการปรับแรงดันไฟฟ้าtagการตั้งค่าต่างๆ สำหรับแบตเตอรี่ประเภทต่างๆ
พรีview คู่มือการเดินสายและการตั้งค่าสำหรับตัวควบคุมการชาร์จพลังงานแสงอาทิตย์ Y&H SY Series
คู่มือฉบับสมบูรณ์สำหรับการเดินสายและการติดตั้งตัวควบคุมการชาร์จพลังงานแสงอาทิตย์ MPPT รุ่น Y&H SY ครอบคลุมการเชื่อมต่อแบตเตอรี่และแผงโซลาร์เซลล์ การเชื่อมต่อโหลด และการปรับแรงดันไฟฟ้าtagการตั้งค่าต่างๆ และฟังก์ชันโหมดการโหลด