1. บทนำ
This instruction manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your HILTI 232244 Eccentric Pin Diamond Coring Sawing tool. Please read this manual thoroughly before initial use and keep it for future reference. Understanding and following these instructions will help ensure optimal performance and extend the lifespan of your tool.
2. ข้อมูลด้านความปลอดภัย
คำเตือนความปลอดภัยทั่วไป: Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves. Ensure the work area is well-lit and clear of obstructions. Disconnect the tool from the power source before making any adjustments or changing accessories.
- ความปลอดภัยทางไฟฟ้า: ตรวจสอบให้แน่ใจว่าแหล่งจ่ายไฟตรงกับข้อกำหนดของเครื่องมือ หลีกเลี่ยงการใช้เครื่องมือในที่ที่ไม่เหมาะสมamp หรือสภาวะเปียกชื้น
- ความปลอดภัยในพื้นที่ทำงาน: Keep children and bystanders away while operating the tool. Do not operate power tools in explosive atmospheres.
- ความปลอดภัยส่วนบุคคล: Stay alert, watch what you are doing, and use common sense. Do not operate the tool while tired or under the influence of drugs, alcohol, or medication.
- การใช้และการดูแลเครื่องมือ: Do not force the tool. Use the correct tool for your application. Maintain tools with care, keeping cutting accessories sharp and clean.
3. การตั้งค่า
Before beginning any coring or sawing operation, proper setup is crucial for safety and performance.
- ตรวจสอบส่วนประกอบ: Verify all parts of the HILTI 232244, including the eccentric pin, diamond coring bit, and sawing blade, are free from damage.
- Attach Coring Bit/Sawing Blade: Securely attach the appropriate diamond coring bit or sawing blade to the tool spindle. Ensure it is tightened according to manufacturer specifications to prevent loosening during operation.
- การเชื่อมต่อไฟฟ้า: Connect the tool to a suitable power source. Ensure the power cord is not damaged and is positioned to avoid tripping hazards.
- การยึดชิ้นงาน: Firmly secure the material to be cored or sawn. Movement of the workpiece during operation can lead to injury or damage to the tool.
- ระบบประปา (ถ้ามี): For wet coring/sawing, connect the water supply system and ensure proper flow for cooling and dust suppression.
4. คู่มือการใช้งาน
Follow these guidelines for effective and safe operation of your HILTI 232244 tool.
- การเริ่มต้นเครื่องมือ: Ensure the tool is properly positioned on the workpiece. Turn on the power.
- Coring Technique: Apply steady, even pressure. Avoid excessive force, which can overheat the diamond segment and reduce cutting efficiency. Allow the diamond to do the work.
- Sawing Technique: Guide the saw blade smoothly along the cutting line. Maintain a consistent speed and avoid twisting the blade.
- การระบายความร้อน: If using wet coring/sawing, ensure continuous water flow to cool the diamond segments and flush away debris.
- การหยุดเครื่องมือ: Release the trigger or switch off the power. Wait for the bit/blade to come to a complete stop before setting the tool down.
5. การบำรุงรักษา
Regular maintenance ensures the longevity and optimal performance of your HILTI 232244.
- การทำความสะอาด: After each use, clean the tool, especially the spindle and ventilation openings, to remove dust and debris. Use a dry cloth.
- การตรวจสอบ: Regularly inspect the power cord for damage, the eccentric pin for wear, and the diamond coring bits/sawing blades for dullness or cracks. Replace worn or damaged parts immediately.
- การหล่อลื่น: Refer to the tool's specific service instructions for any required lubrication points.
- พื้นที่จัดเก็บ: Store the tool in a dry, secure location, out of reach of children. Protect it from extreme temperatures.
6 การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| เครื่องมือไม่เริ่มทำงาน | ไม่มีแหล่งจ่ายไฟ สายไฟชำรุด สวิตช์ชำรุด | ตรวจสอบการเชื่อมต่อไฟฟ้า; ตรวจสอบสายไฟ; ติดต่อศูนย์บริการ |
| ประสิทธิภาพการตัดลดลง | Dull diamond bit/blade; Insufficient water flow (wet applications); Incorrect pressure | Replace/sharpen bit/blade; Check water supply; Adjust operating pressure |
| แรงสั่นสะเทือนมากเกินไป | Loose bit/blade; Damaged spindle; Unbalanced workpiece | Tighten bit/blade; Inspect spindle; Secure workpiece properly |
7. ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| ยี่ห้อ | ฮิลติ |
| หมายเลขรุ่น | 232244 |
| วัสดุ | เพชร |
| น้ำหนักสินค้า | 16 ออนซ์ (1 ปอนด์) |
| ประเภทการเสร็จสิ้น | เพชร |
| จำนวนหน่วย | 1.0 จำนวน |
| จำเป็นต้องใช้แบตเตอรี่หรือไม่? | เลขที่ |
8. การรับประกันและการสนับสนุน
For warranty information, please refer to the documentation included with your purchase or visit the official HILTI website. For technical support, service, or to order replacement parts, please contact HILTI customer service directly. Ensure you have your model number (232244) and purchase date available when contacting support.
HILTI Contact Information: กรุณาเข้าเยี่ยมชม www.hilti.com for local contact details.