WAC Landscape Lighting Cone LED 12V Deck and Patio Light Instruction Manual

1. ข้อมูลด้านความปลอดภัย

Please read these instructions carefully before installation and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• ความปลอดภัยทางไฟฟ้า: This product operates on a 12V AC/DC low voltage system. A compatible 12V magnetic or electronic power supply (transformer) is required and sold separately. Do not connect directly to 120V AC.
• การติดตั้ง: Installation should be performed by a qualified electrician or trained professional in accordance with local electrical codes. Ensure power is disconnected at the source before installation or servicing.
• การใช้งานกลางแจ้ง: The fixture is IP66 rated, indicating protection against high-pressure water jets and outdoor elements. Ensure all connections are watertight using the provided gel-filled wire nuts.
• dimming: For dimming functionality, use a Magnetic Low Voltage (MLV) dimmer (sold separately).
• ความสมบูรณ์ของผลิตภัณฑ์: ห้ามดัดแปลงอุปกรณ์ การดัดแปลงใดๆ อาจทำให้การรับประกันเป็นโมฆะและก่อให้เกิดอันตรายต่อความปลอดภัย

2. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่าส่วนประกอบทั้งหมดมีอยู่ก่อนเริ่มการติดตั้ง

• WAC Landscape Lighting Cone LED Deck and Patio Light (Model 3021-27WT)
• 3-foot lead wire (attached to fixture)
• 2 x Ideal Direct Burial Wire Nuts (gel-filled)
• Hardware Pack for Surface Mount

Image: The WAC Landscape Lighting Cone LED Deck and Patio Light in white, showing the attached lead wire and two gel-filled direct burial wire nuts.

3. การตั้งค่าและการติดตั้ง

This fixture is designed for surface mounting on a flat surface, such as a 4x4 post or deck railing. A 12V AC/DC landscape lighting transformer (sold separately) is required.

3.1 เครื่องมือที่จำเป็น (ไม่รวม)

• เจาะ
• Drill bits appropriate for mounting surface and wire passage
• ไขควง
• ระบำลวด
• เล่มที่tagผู้ทดสอบอิเล็กทรอนิกส์

3.2 ขั้นตอนการติดตั้ง

1. ตัดการเชื่อมต่อไฟฟ้า: Ensure the power supply to the landscape lighting system is turned off at the main breaker or transformer.
2. เตรียมพื้นผิวการติดตั้ง: Select a suitable location for the light. The fixture is designed to fit cleanly on a 4x4 post without hanging off the sides. Mark the desired mounting points for the screws from the hardware pack.
3. เจาะรูนำ: Drill pilot holes for the mounting screws. If routing the wire through the mounting surface, drill an additional hole for the lead wire.
4. ติดตั้งอุปกรณ์: Secure the light fixture to the mounting surface using the provided hardware. Ensure it is firmly attached.
5. การเชื่อมต่อสายไฟ:
   • Strip approximately 1/2 inch of insulation from the ends of the fixture's lead wire and the main low voltage landscape wire.
   • Twist the exposed copper wires together (one from the fixture to one from the main wire).
   • Secure each connection with a gel-filled direct burial wire nut. Twist the wire nut clockwise until tight. The gel inside the nut will seal the connection, protecting it from moisture.
   • Bury the wire connections underground or ensure they are otherwise protected and concealed.
6. เชื่อมต่อกับหม้อแปลง: Connect the main low voltage landscape wire to your 12V AC/DC landscape lighting transformer (sold separately). Refer to your transformer's manual for specific connection instructions.
7. คืนค่าพลัง: Once all connections are secure and properly insulated, restore power to the landscape lighting system.

ภาพ: อดีตample of a WAC Landscape Lighting 12V power supply transformer, required for operation (sold separately).

4. การดำเนินการ

The WAC Landscape Lighting Cone LED Deck and Patio Light operates automatically when connected to a compatible 12V landscape lighting system controlled by a timer or photocell (not included). The light will illuminate when power is supplied to the low voltagอีวงจร

• เปิด/ปิดเครื่อง: Control the light by turning the 12V landscape lighting transformer on or off.
• dimming: If connected to a Magnetic Low Voltage (MLV) dimmer, the brightness can be adjusted smoothly and continuously down to 10% of its maximum output.
• เอาท์พุตแสง: This model provides 2700K Warm LED light, offering a soft, inviting glow suitable for decks, patios, and pathways.

Image: A visual comparison showing the difference between 2700K Warm light (left) and 3000K Warm White light (right). This specific model emits 2700K Warm light.

5. การบำรุงรักษา

The WAC Landscape Lighting Cone LED Deck and Patio Light is designed for minimal maintenance. The built-in LED has a rated life of 50,000 hours.

• การทำความสะอาด: ทำความสะอาดอุปกรณ์เป็นระยะด้วยผ้านุ่มๆamp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or lens.
• การตรวจสอบ: Annually inspect the wiring and connections for any signs of wear, damage, or corrosion. Ensure wire nuts remain securely fastened.
• การเปลี่ยนหลอดไฟ LED: The LED is built-in and not user-replaceable. If the LED fails within the warranty period, contact customer support.

6 การแก้ไขปัญหา

If your WAC Landscape Lighting Cone LED Deck and Patio Light is not functioning as expected, refer to the following common issues and solutions:

7. ข้อมูลจำเพาะ

Image: Technical line drawing showing the dimensions of the WAC Cone LED Deck and Patio Light.

8. การรับประกันและการสนับสนุน

การรับประกัน: This WAC Landscape Lighting product is covered by a 10-year functional warranty and a 2-year finish warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

ข้อยกเว้น: The warranty does not cover damage caused by improper installation, misuse, abuse, accidents, modifications, or acts of nature. It also does not cover normal wear and tear or consumable parts.

การสนับสนุนลูกค้า: For technical assistance, warranty claims, or replacement parts, please contact WAC Lighting customer service. Have your model number (3021-27WT) and proof of purchase ready.

WAC Lighting Contact Information:

• เยี่ยมชม WAC Lighting Store on Amazon สำหรับข้อมูลเพิ่มเติม
• Refer to the official WAC Landscape Lighting webเว็บไซต์สำหรับรายละเอียดการติดต่อโดยตรง