คู่มือผู้ใช้เครื่องบันทึกข้อมูลเหตุการณ์และอุณหภูมิแบบพกพา Onset HOBO UA-003-64

1. บทนำ

The Onset HOBO UA-003-64 Pendant Event and Temperature Data Logger is designed for accurate measurement of environmental conditions. This device efficiently collects and stores instantaneous contact event and temperature data, making it suitable for various monitoring applications, including rainfall measurement when paired with a tipping-bucket rain gauge. This manual provides essential information for the proper setup, operation, and maintenance of your data logger.

2. สินค้าหมดview

The HOBO UA-003-64 is a compact, waterproof data logger capable of recording both contact events and temperature. It is typically used with an optical base station (such as the BASE-U-4) for data offload and configuration. The device is designed for deployment in various environments, including outdoor and condensing conditions.

An image showing the Onset HOBO UA-003-64 Pendant Event and Temperature Data Logger, which is a small yellow rectangular device with a white cable connected to it. Next to it is the smaller black Optic Base Station BASE-U-4 with a USB cable.

3. คุณสมบัติ

• 2-wire interface sensor for mechanical and electrical contact closure measurement.
• Maximum measurement rate of 1 Hz (1 pulse per second).
• Temperature measurement range: -20°C to 70°C.
• User-replaceable coin cell lithium battery with a 1-year lifespan.
• Waterproof housing suitable for outdoor or condensing environments, submersible up to 30 meters (100 feet).

4. เนื้อหาบรรจุภัณฑ์

The standard kit includes the following components:

• UA-003-64 Pendant Event and Temperature Data Logger
• Optic Base Station BASE-U-4
• Free software download (available from the manufacturer's webงาน)

5. การตั้งค่า

1. การติดตั้งซอฟต์แวร์: Download and install the HOBOware software from the Onset website onto your computer. This software is required to configure the data logger and offload data.
2. เชื่อมต่อสถานีฐาน: Connect the Optic Base Station BASE-U-4 to your computer's USB port.
3. Connect Data Logger: Place the UA-003-64 data logger onto the optical base station. Ensure a secure connection for data transfer and configuration.
4. Configure Logger: Use the HOBOware software to configure the logging interval, start time, and other parameters for your specific application.
5. การปรับใช้: Deploy the data logger in the desired monitoring location. For accurate temperature measurements in direct sunlight, it is recommended to use a solar radiation shield (e.g., RS1 or M-RSA, sold separately).

6. คู่มือการใช้งาน

Once configured and deployed, the UA-003-64 data logger will automatically begin recording data based on your settings. Event data is stored only when an event occurs, optimizing memory usage.

• การรวบรวมข้อมูล: The logger continuously monitors and records contact events and temperature at the specified intervals.
• Data Offload: To retrieve data, connect the data logger to the optical base station and then to your computer. Use the HOBOware software to offload the recorded data.
• การวิเคราะห์ข้อมูล: The HOBOware software allows you to view, plot, and analyze the collected data. Detailed event data is accessible for in-depth analysis.

7. การบำรุงรักษา

• การเปลี่ยนแบตเตอรี่: The data logger uses a user-replaceable coin cell lithium battery with an approximate 1-year lifespan. Refer to the full product manual for detailed instructions on safe battery replacement.
• การทำความสะอาด: Keep the data logger and optical base station clean. Wipe with a damp เช็ดทำความสะอาดด้วยผ้าตามความจำเป็น หลีกเลี่ยงการใช้สารเคมีรุนแรงหรือวัสดุที่มีฤทธิ์กัดกร่อน
• ที่อยู่อาศัยกันน้ำ: Ensure the waterproof housing is intact and free from cracks or damage before deployment in wet environments.

8 การแก้ไขปัญหา

• Logger Not Responding: Ensure the battery is properly installed and has sufficient charge. Reconnect the logger to the optical base station and computer.
• ปัญหาการโอนข้อมูล: Verify that the HOBOware software is correctly installed and the optical base station is properly connected to the computer. Ensure the data logger is securely seated on the base station.
• การอ่านอุณหภูมิที่ไม่แม่นยำ: If deployed in direct sunlight, ensure a solar radiation shield is used to prevent solar heating effects on temperature measurements.

9. ข้อมูลจำเพาะ

10. การรับประกันและการสนับสนุน

For detailed warranty information and technical support, please refer to the official Onset Computer Corporation webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง เก็บใบเสร็จรับเงินไว้เพื่อใช้ในการเคลมประกัน