Blackstar FLY3BASSPAK

เบสขนาดกะทัดรัด Blackstar FLY3BASSPAK Amp คู่มือการใช้งานชุดสเตอริโอ

Model: FLY3BASSPAK

การแนะนำ

The Blackstar FLY3BASSPAK is a compact, portable bass amplifier stereo pack designed for bass players seeking versatile tone options in a small form factor. This pack combines the FLY 3 Bass mini amplifier with the FLY 103 extension cabinet, creating a 6-watt stereo setup. It is suitable for practice, recording, and small jam sessions.

เนื้อหาแพ็คเกจ

Upon unpacking your Blackstar FLY3BASSPAK, please ensure all the following items are present:

  • Blackstar FLY 3 Bass Mini Ampหน่วย liifier
  • Blackstar FLY 103 Extension Cabinet
  • หน่วยจ่ายไฟ
  • Connection Cable for FLY 103 Extension Cabinet
Blackstar FLY 3 Bass mini amplifier and FLY 103 extension cabinet connected

Image: The Blackstar FLY 3 Bass mini amplifier (right) connected to the FLY 103 extension cabinet (left), forming a stereo setup.

การตั้งค่า

การจ่ายไฟให้กับหน่วย

The FLY 3 Bass amplifier can be powered in two ways:

  1. พลังงานแบตเตอรี่: Insert 6 AA batteries into the battery compartment on the underside of the FLY 3 Bass unit. Ensure correct polarity.
  2. แหล่งจ่ายไฟหลัก: Connect the provided power supply unit to the DC input jack on the FLY 3 Bass amplifier and then to a suitable mains outlet. The power supply operates on 100-240 volts.

บันทึก: If using batteries, ensure the battery cover is securely in place to prevent rattling, which can affect sound quality. Alternatively, if using mains power without batteries, you may remove the battery cover or place a small piece of foam in the compartment to prevent rattling.

Connecting the Extension Cabinet

To achieve the full 6-watt stereo sound, connect the FLY 103 extension cabinet to the FLY 3 Bass amplifier using the supplied connection cable. The cable winds up on the back of the extension speaker for tidy storage.

Blackstar FLY 3 Bass mini ampเครื่องขยายเสียงที่แสดงการควบคุม

Image: Close-up of the Blackstar FLY 3 Bass mini amplifier, highlighting its control panel and input/output jacks.

การควบคุมและฟังก์ชั่น

The FLY 3 Bass amplifier features a range of controls to shape your sound:

  • ได้รับ: Adjusts the input sensitivity and amount of overdrive. Higher settings increase distortion.
  • ปริมาณ: ควบคุมระดับเอาต์พุตโดยรวมของ ampชีวิต.
  • EQ (Mid-Cut): A tone control that allows for precise shaping of the mid-range frequencies. Turning the knob clockwise reduces mid-range, while counter-clockwise increases it.
  • คอมเพรสเซอร์: Engages a built-in compressor for dynamic control and sustain.
  • Sub-Bass: Enhances the low-end response, adding depth to your bass tone.
  • Clean/Overdrive Switch: Selects between a clean, uncolored tone and an overdriven, distorted tone.
  • MP3/Line In Jack: A 3.5mm input for connecting external audio devices (e.g., MP3 players, smartphones) to play along with music.
  • Emulated Line Out/Headphones Jack: A 3.5mm output for silent practice with headphones or direct recording to a DAW or mixing board.

การดำเนินการ

การใช้พื้นฐาน

1. Connect your bass guitar to the input jack on the FLY 3 Bass ampชีวิต.

2. เปิดเครื่อง amplifier using either batteries or the mains power supply.

3. Select your desired channel (Clean or Overdrive) using the switch.

4. Adjust the Gain, Volume, EQ, Compressor, and Sub-Bass controls to achieve your preferred tone and volume level.

A person playing a bass guitar connected to the Blackstar FLY 3 Bass ampชีวิต

Image: A bass player practicing with the Blackstar FLY 3 Bass amplifier, demonstrating its use for personal practice.

Playing Along with Music

Connect your smartphone or MP3 player to the MP3/Line In jack using a 3.5mm audio cable. The audio from your device will play through the amplifier, allowing you to practice along with your favorite tracks.

Blackstar FLY 3 Bass amplifier connected to a smartphone outdoors

Image: The Blackstar FLY 3 Bass amplifier connected to a smartphone via an auxiliary cable, used outdoors for playing music.

Recording and Silent Practice

For silent practice, plug headphones into the Emulated Line Out/Headphones jack. This output also provides an emulated speaker signal suitable for direct recording to an audio interface or mixing console.

การซ่อมบำรุง

  • การทำความสะอาด: ใช้ผ้าแห้งเนื้อนุ่มทำความสะอาดด้านนอกของตัวเครื่อง amplifier and cabinet. Avoid using abrasive cleaners or solvents.
  • พื้นที่จัดเก็บ: เก็บอุปกรณ์ไว้ในที่แห้ง หลีกเลี่ยงอุณหภูมิที่สูงหรือต่ำเกินไป และแสงแดดโดยตรง
  • การเปลี่ยนแบตเตอรี่: If using battery power, replace all 6 AA batteries when the sound quality degrades or the unit fails to power on. Always use fresh batteries of the same type.
  • การดูแลสายเคเบิล: Handle all cables with care. Avoid sharp bends or excessive pulling to prevent damage.

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ไม่มีเสียงออก
  • หน่วยไม่ได้เปิดเครื่อง
  • ตั้งปุ่มปรับระดับเสียงไว้ต่ำเกินไป
  • Instrument cable faulty or not connected.
  • แบตเตอรี่หมด
  • Ensure power is on and power supply/batteries are functional.
  • Increase the Volume knob.
  • Check all cable connections and try a different cable.
  • Replace batteries or use mains power.
Distorted sound at moderate volumes.
  • Gain set too high for clean channel.
  • Battery cover rattling (if no batteries are installed).
  • Reduce the Gain knob.
  • Ensure batteries are installed or remove the battery cover and place foam to prevent rattling.
Extension cabinet not working.
  • Connection cable faulty or not properly connected.
  • Check the connection cable between the FLY 3 Bass and FLY 103. Ensure it is fully inserted.

ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
หมายเลขรุ่นFLY3BASSPAK
เอาท์พุต วัดtage6 Watts (3W + 3W stereo)
ขนาดลำโพง3-inch (per unit)
ช่องทางการClean, Overdrive
การควบคุมGain, Volume, EQ (Mid-Cut), Compressor, Sub-Bass, Overdrive Switch
ข้อมูลอินพุตInstrument Input, MP3/Line In (3.5mm)
เอาท์พุตEmulated Line Out/Headphones (3.5mm)
ตัวเลือกพลังงาน6 x AA Batteries, DC Power Supply (included)
ขนาดสินค้าขนาดโดยประมาณ 10.3 x 6.9 x 5.4 นิ้ว (เมื่อรวมกัน)
น้ำหนักสินค้า1 pound (main unit, approximate)
วัสดุพลาสติก

การรับประกันและการสนับสนุน

For warranty information and technical support, please refer to the official Blackstar Ampการทำให้บริสุทธิ์ website or contact their customer service department. Details regarding specific warranty periods and service procedures are typically provided with your purchase documentation.

คุณสามารถเยี่ยมชม Blackstar Store on Amazon สำหรับข้อมูลผลิตภัณฑ์และทรัพยากรเพิ่มเติม

เอกสารที่เกี่ยวข้อง - FLY3BASSPAK

พรีview แบล็คสตาร์ เดบิวต์ เบส Amplifier: คู่มือการตั้งค่าและคุณสมบัติ
คู่มือการตั้งค่าแบบย่อสำหรับเบส Blackstar DEBUT BASS 15 และ 25 ampเครื่องขยายเสียง เรียนรู้วิธีการเชื่อมต่อ ตั้งค่าการควบคุม และเริ่มต้นใช้งานเครื่องใหม่ของคุณ ampเครื่องอ่านบาร์โค้ด รวมถึงข้อมูลด้านความปลอดภัย
พรีview เบส Blackstar Debut ขนาด 15 และ 25 นิ้ว Ampคู่มือสำหรับเจ้าของเครื่องอ่านไฟ
คู่มือการใช้งานสำหรับกีต้าร์เบส Blackstar Debut Bass รุ่น 15 และ 25 amplifiers, covering important safety instructions, features, front and rear panel controls, and technical specifications. Learn how to use and maintain your ampไลไฟเออร์ได้อย่างปลอดภัย
พรีview กีตาร์ Blackstar ID:Core Series Ampคู่มือการเป็นเจ้าของเครื่องชาร์จแบตเตอรี่
คู่มือสำหรับเจ้าของกีตาร์ซีรีส์ Blackstar ID:Core ampเครื่องขยายเสียง (ID:CORE STEREO 10, 20, 40, 40H) คุณสมบัติประกอบด้วย การตั้งค่าเสียง, การควบคุม ISF, เอฟเฟกต์ Super Wide Stereo, ซอฟต์แวร์ INSIDER และการเชื่อมต่อ USB สำหรับการบันทึกและการอัปเดต
พรีview แบล็คสตาร์ ฟลาย วินtagอี มินิ Ampคู่มือการติดตั้งเครื่องขยายสัญญาณ
คู่มือการตั้งค่าแบบย่อสำหรับ Blackstar FLY Vintagกีตาร์มินิ 3 วัตต์ ampเครื่องอ่านบาร์โค้ด ครอบคลุมถึงการเริ่มต้นใช้งาน การตั้งค่าการควบคุม การเชื่อมต่ออุปกรณ์ ข้อมูลแบตเตอรี่ และคำแนะนำด้านความปลอดภัยที่สำคัญ
พรีview หูฟังกีต้าร์ Blackstar BEAM SOLO Ampคู่มือการใช้งาน lifier
คู่มือการใช้งานฉบับสมบูรณ์สำหรับหูฟังกีตาร์พกพา Blackstar BEAM SOLO ampเครื่องขยายเสียง พร้อมรายละเอียดคุณสมบัติ การควบคุม การเชื่อมต่อ การใช้งานร่วมกับแอปพลิเคชัน คำแนะนำด้านความปลอดภัย และข้อมูลจำเพาะทางเทคนิค
พรีview คู่มือเจ้าของ Blackstar BEAM SOLO - หูฟังกีตาร์พกพา Ampชีวิต
คู่มือเจ้าของฉบับสมบูรณ์สำหรับ Blackstar BEAM SOLO หูฟังกีตาร์พกพา ampตัวระบุตำแหน่ง เรียนรู้เกี่ยวกับคุณสมบัติ การควบคุม การเชื่อมต่อ การรวมแอป และข้อมูลจำเพาะทางเทคนิค