คู่มือการใช้งานสวิตช์เปลี่ยนทิศทาง 1 ขั้ว 16AX รุ่น VIMAR 0R14005 Plana Series

1. บทนำ

This manual provides essential instructions for the safe and proper installation, operation, and maintenance of the VIMAR 0R14005 Plana Series 1-Pole 16AX Diverter Switch. Please read this manual thoroughly before use and retain it for future reference. This device is designed for controlling electrical circuits, typically for switching between two different lighting points or functions from a single location.

2. สินค้าหมดview

2.1 คุณสมบัติหลัก

• ประเภทการควบคุม: Toggle, button mechanism for reliable switching.
• ประเภทการแก้ไข: Snap-in design for secure installation in compatible frames.
• ความเป็นโมดูลาร์: A modular device suitable for integration into VIMAR Plana series switch programs.
• ระดับการป้องกัน: Suitable for environments requiring an IP40 protection rating.
• ส่องสว่างได้: Designed to be illuminable, with a replaceable button (illumination module sold separately).
• ความจุ: Rated for 1-pole, 16 AX, 250 V~, supporting up to 200 W for lamps with integrated power supply (IEC 60669-1:2017).

2.2 ส่วนประกอบ

The VIMAR 0R14005 Diverter Switch consists of the main switch module. It is designed to be integrated into a VIMAR Plana series support frame and then covered by a compatible wall plate (not included).

รูปที่ 1: ด้านหน้า view of the VIMAR 0R14005 Plana Series 1-Pole 16AX Diverter Switch. This image shows the white button and the overall rectangular shape of the switch module, ready for integration into a wall plate.

รูปที่ 2: ภาพไอโซเมตริก view of the VIMAR 0R14005 Plana Series 1-Pole 16AX Diverter Switch. This view highlights the side profile and the snap-in tabs at the top and bottom, which secure the module within a support frame.

3. ข้อมูลด้านความปลอดภัย

• อันตรายจากไฟฟ้า: Always disconnect the main power supply at the circuit breaker or fuse box before attempting any installation, wiring, or maintenance. Failure to do so can result in serious injury or death.
• บุคลากรที่ผ่านการรับรอง: Installation and wiring should only be performed by a qualified electrician in accordance with all local and national electrical codes and regulations.
• เล่มที่tage และปัจจุบัน: ไม่เกินปริมาตรที่กำหนดtage (250 V~) and current (16 AX) ratings of the switch. Overloading can cause damage to the device and create a fire hazard.
• สภาพแวดล้อม : Ensure the installation environment is dry and within the specified operating temperature range. This device is rated IP40, meaning it is protected against solid objects larger than 1mm, but not against water.
• ความสมบูรณ์ของผลิตภัณฑ์: Do not modify or disassemble the switch. Use only genuine VIMAR accessories and components.

4. การติดตั้ง (ตั้งค่า)

This section outlines the general steps for installing the VIMAR 0R14005 Diverter Switch. Specific wiring diagrams for diverter switches should be consulted based on your electrical system and local regulations.

1. ตัดการเชื่อมต่อไฟฟ้า: Turn off the power to the circuit at the main electrical panel. Verify that the power is off using a voltagอีผู้ทดสอบ
2. เตรียมเดินสายไฟ: Ensure that the electrical wires (live, switched live 1, switched live 2, and earth if applicable) are properly stripped and ready for connection.
3. เชื่อมต่อสายไฟ: Connect the wires to the terminals on the back of the VIMAR 0R14005 switch. Refer to the wiring diagram provided with your VIMAR Plana support frame or consult a qualified electrician for correct diverter switch wiring. Typically, a diverter switch has three terminals for the switched live wires and one for the common live wire.
4. Mount Switch Module: Snap the VIMAR 0R14005 switch module into the appropriate opening of a VIMAR Plana series support frame. Ensure it clicks securely into place.
5. Install Support Frame: Secure the support frame, with the switch module installed, into the flush-mounted electrical box in the wall.
6. ติดแผ่นผนัง: Once the support frame is securely mounted, attach the decorative VIMAR Plana series wall plate over the frame and switch module.
7. คืนค่าพลัง: Turn the power back on at the main electrical panel.
8. ทดสอบฟังก์ชันการทำงาน: Test the switch to ensure it operates correctly, controlling the intended lighting or circuit.

5. การดำเนินการ

The VIMAR 0R14005 is a diverter switch, meaning it allows you to control a single electrical load (e.g., a light) from two different locations when paired with another diverter switch, or to switch between two different circuits from one location. Its operation is straightforward:

• การสลับ: Pressing the toggle button will change the state of the connected circuit. For a diverter setup, this means it will either complete or break the circuit path, allowing the load to be controlled from either switch.
• Illumination (Optional): If an optional illumination module is installed, the button may light up to indicate its state or for easy location in the dark.

6. การบำรุงรักษา

The VIMAR 0R14005 Diverter Switch requires minimal maintenance to ensure long-term performance.

• การทำความสะอาด: To clean the surface of the switch, gently wipe it with a soft, dry, or slightly damp ใช้ผ้าเช็ดทำความสะอาดเท่านั้น ห้ามใช้สารทำความสะอาดที่มีฤทธิ์กัดกร่อน ตัวทำละลาย หรือสารเคมีรุนแรง เพราะอาจทำให้พื้นผิวหรือชิ้นส่วนภายในเสียหายได้
• การตรวจสอบ: Periodically inspect the switch for any signs of damage, loose connections, or discoloration. If any issues are observed, disconnect power and consult a qualified electrician.
• Button Replacement: If the button or its illumination module (if installed) needs replacement, ensure power is disconnected before carefully prying off the old button and snapping in the new one.

7 การแก้ไขปัญหา

If you encounter issues with your VIMAR 0R14005 Diverter Switch, refer to the following common troubleshooting steps:

• สวิตช์ไม่ตอบสนอง:
  • Check if the main power supply to the circuit is on.
  • ตรวจสอบให้แน่ใจว่าการเชื่อมต่อสายไฟทั้งหมดแน่นหนาและถูกต้องตามแผนผังการเดินสายไฟ
  • If part of a multi-way switching setup, check the other diverter switch(es) for proper operation.
• Illumination Not Working (if applicable):
  • Verify that the illumination module is correctly installed and connected.
  • Check if the illumination module itself is faulty and requires replacement.
• กลิ่นร้อนจัดหรือแสบร้อน:
  • ตัดกระแสไฟออกจากวงจรทันที
  • This indicates a serious electrical issue. Do not attempt to fix it yourself. Contact a qualified electrician immediately.

If the problem persists after attempting these steps, contact a qualified electrician or VIMAR technical support.

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

VIMAR products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or visit the official VIMAR website. For technical assistance, troubleshooting beyond this manual, or to inquire about spare parts, please contact your local VIMAR distributor or customer support.

VIMAR อย่างเป็นทางการ Webเว็บไซต์: www.vimar.com