การแนะนำ
The iOttie Easy One Touch Mini is a compact and fully functional mounting solution designed for easy installation into most vehicle air vents. This mount offers a safe, versatile, and highly functional way to secure your smartphone while driving. Its innovative Easy One Touch system allows for quick mounting and releasing of your device with a single finger press, ensuring convenience and safety on the road.

Figure 1: iOttie Easy One Touch Mini Air Vent Car Mount with a smartphone.
คุณสมบัติผลิตภัณฑ์
- Easy One Touch System: Locks and releases your device with a single, simple touch.
- เข้ากันได้สากล: Fits all smartphones and their cases (e.g., OtterBox, Incipio) ranging from 2.3 to 3.5 inches wide.
- เหมาะสมที่สุด Viewอิงมุม: The cradle rotates 360 degrees at the swivel ball for customizable viewการไอเอ็นจี
- Secure Vent Grip: Features a spring-loaded one-click lock and release mechanism for a strong, clamped hold to your vent blade, minimizing vibrations.
- การจัดการสายเคเบิลแบบบูรณาการ: Built-in support guides on the back hold charging wires in place for an organized setup.
เนื้อหาแพ็คเกจ
- ที่ยึดช่องระบายอากาศ
- ตัวเชื่อมต่อ
คู่มือการติดตั้ง
Follow these steps to properly install your iOttie Easy One Touch Mini Air Vent Car Mount:
- ประกอบภูเขา: Attach the cradle to the air vent clip. Ensure the ball joint is securely fastened by tightening the knurlน๊อต.
- Insert into Air Vent: Locate a suitable air vent in your vehicle. Push the vent clip firmly into one of the vent blades.
- ยึดภูเขาให้แน่น: Once inserted, push the locking switch sideways (or twist the knob, depending on your specific model) to clamp the mount securely onto the vent blade. This minimizes movement and vibrations.
- ปรับ Viewอิงมุม: Utilize the 360-degree rotating ball joint to position the cradle for optimal viewการไอเอ็นจี
Video 1: Demonstration of various air vent mount installations, including the twist-on and push-in types. This video provides visual guidance on how to securely attach the mount to different car vent designs.

Figure 2: The iOttie Easy One Touch Mini securely installed in a vehicle's air vent.
การดำเนินการ
Using your iOttie Easy One Touch Mini is simple and intuitive:
- การติดตั้งอุปกรณ์ของคุณ: Gently press your smartphone against the center button of the cradle. The side arms will automatically close and secure your device.
- เรเลasing Your Device: Squeeze the release levers located on the sides of the cradle. The arms will open, allowing you to remove your smartphone.

Figure 3: Visual guide demonstrating the one-touch lock and release functionality.
วิดีโอ 2: การสาธิตผลิตภัณฑ์asing the Easy One Touch mounting and releasing of a smartphone.
การซ่อมบำรุง
To ensure the longevity and optimal performance of your iOttie Easy One Touch Mini, regular maintenance is recommended:
- Clean Rubber Arms: Periodically clean the rubber gripping arms with a damp cloth. This prevents dirt and debris buildup that could reduce grip effectiveness.
- Check Vent Connection: Ensure the mount remains securely clamped to the air vent. Re-tighten the locking mechanism if any looseness is observed.
- หลีกเลี่ยงอุณหภูมิที่สูงหรือต่ำเกินไป: Prolonged exposure to extreme heat (e.g., direct sunlight in a parked car) can affect the mount's materials and adhesive properties.
การแก้ไขปัญหา
If you encounter any issues with your iOttie Easy One Touch Mini, consider the following:
- Mount Not Holding Securely:
- Ensure the vent clip is fully inserted into the air vent.
- Verify the locking mechanism is fully engaged and tightened.
- Check if your vent blades are compatible and strong enough to support the mount and your device.
- Phone Slipping from Cradle:
- Clean the rubber gripping arms as described in the Maintenance section.
- Ensure your phone is centered and pressed firmly against the one-touch button when mounting.
- Confirm your phone's width is within the supported range (2.3 to 3.5 inches).
- Difficulty with One Touch Mechanism:
- Ensure no debris is obstructing the internal mechanism.
- Apply gentle, firm pressure to the center button when mounting.
ข้อมูลจำเพาะ
| ยี่ห้อ | ไออ๊อตตี้ |
| หมายเลขรุ่น | HLCRIO124 |
| ขนาดสินค้า | 2.2 x 4.8 x 5.7 นิ้ว |
| น้ำหนักสินค้า | 1.6 ออนซ์ |
| สี | สีดำ |
| ประเภทการติดตั้ง | ช่องระบายอากาศ |
| อุปกรณ์ที่รองรับ | Smartphones (2.3 to 3.5 inches wide) |
| คุณสมบัติพิเศษ | Rotatable, Easy One Touch System, Cable Management |
การรับประกันและการสนับสนุน
For warranty information, product support, or to inquire about replacement parts, please visit the official iOttie website or contact their customer service directly. iOttie is committed to providing high-quality products and excellent customer satisfaction.
คุณยังสามารถเยี่ยมชม iOttie Store on Amazon สำหรับข้อมูลเพิ่มเติมและข้อเสนอผลิตภัณฑ์





