1. บทนำ
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell TE-MX 1600-2 CE Paint and Mortar Mixer. Please read these instructions carefully before using the device for the first time and keep them for future reference.
The Einhell TE-MX 1600-2 CE is a powerful and high-quality tool designed for mixing liquid and powdery building materials such as paints, mortar, plaster, and adhesives. Its robust construction and electronic speed control ensure optimal mixing results for various material consistencies.
2. คำแนะนำด้านความปลอดภัยทั่วไป
Always observe the following safety precautions to prevent electric shock, injury, and fire hazards.
- อุปกรณ์ป้องกันภัยส่วนบุคคล: Always wear safety goggles, hearing protection, a dust mask, and protective gloves when operating the mixer.
- พื้นที่ทำงาน : Keep your work area clean, well-lit, and free from clutter. Do not operate the mixer in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- ความปลอดภัยทางไฟฟ้า: ตรวจสอบแหล่งจ่ายไฟ voltage matches the rating on the mixer. Do not expose the mixer to rain or wet conditions. Avoid body contact with earthed or grounded surfaces.
- การยึดเกาะที่มั่นคง: Always hold the mixer firmly with both hands using the ergonomic handles during operation.
- ความเข้ากันได้ของวัสดุ: Only mix materials for which the mixer is designed. Do not use the mixer for mixing food or other non-construction materials.
- สิ่งที่แนบมากับพาย: Ensure the mixing paddle is securely attached before starting the mixer.
- ถอดปลั๊กเมื่อไม่ได้ใช้งาน: Disconnect the mixer from the power supply before making any adjustments, changing accessories, or storing the tool.
- เด็กและผู้เห็นเหตุการณ์: Keep children and bystanders away while operating the mixer.
3. สินค้าหมดview และส่วนประกอบ
Familiarize yourself with the main components of your Einhell TE-MX 1600-2 CE mixer.
Figure 1: The Einhell TE-MX 1600-2 CE Paint and Mortar Mixer with its mixing paddle attached. This image shows the overall design, including the motor housing, ergonomic handles, and the M14 threaded shaft with the mixing paddle.
รูปที่ 2: ด้านบน view of the mixer, highlighting the motor housing and the ergonomic handle design for comfortable two-hand operation.
Figure 3: Close-up of the electronic speed control dial, allowing for precise adjustment of mixing speed.
Figure 4: Detail of the robust M14 tool holder, designed for secure attachment of various mixing paddles.
4. การติดตั้งและการประกอบ
Follow these steps to prepare your mixer for operation.
- การแกะกล่อง: นำส่วนประกอบทั้งหมดออกจากบรรจุภัณฑ์อย่างระมัดระวัง ตรวจสอบความเสียหายระหว่างการขนส่ง
- Attaching the Mixing Paddle:
- Ensure the mixer is unplugged from the power supply.
- Align the M14 thread of the mixing paddle with the M14 tool holder on the mixer.
- Screw the paddle clockwise onto the tool holder until it is hand-tight. Use a suitable wrench if necessary to secure it firmly, but do not overtighten.
- การเชื่อมต่อไฟฟ้า: Connect the mixer's power cable to a suitable grounded power outlet (230 Volts).
5. คู่มือการใช้งาน
This section details how to effectively use your paint and mortar mixer.
เลือกความเร็วได้ 5.1 ระดับ
The TE-MX 1600-2 CE features a 2-speed gearbox and electronic speed control for optimal mixing.
- เกียร์ 1 (ความเร็วต่ำ): Ideal for heavy, viscous materials like mortar, concrete, or plaster. Provides high torque for thorough mixing. (180 - 480 rpm)
- เกียร์ 2 (ความเร็วสูง): Suitable for lighter, more liquid materials such as paints, varnishes, or adhesives. Offers higher speed for quick and smooth blending. (300 - 750 rpm)
Use the gear selector switch to choose the appropriate speed range before starting the mixer. The electronic speed control dial (Figure 3) allows for fine-tuning the speed within the selected gear.
5.2 Soft Start Function
The mixer is equipped with a soft start function to prevent splashing and ensure a smooth start-up. When you press the trigger, the paddle will gradually increase speed until it reaches the set level.
5.3 ขั้นตอนการผสม
- เตรียมวัสดุ: Place the material to be mixed into a sturdy mixing tub or bucket. Ensure the container is large enough to prevent overflow during mixing.
- Immerse Paddle: Lower the mixing paddle into the material until it is fully submerged.
- เริ่มผสม: Press the trigger switch to start the mixer. Hold the mixer firmly with both hands.
- ปรับความเร็ว: Use the electronic speed control dial to adjust the mixing speed as needed for the material's consistency.
- Mixing Technique: Move the mixer slowly through the material, ensuring all parts are thoroughly blended. Avoid lifting the paddle out of the material while it is rotating to prevent splashing.
- การทำงานต่อเนื่อง: For extended mixing tasks, you can engage the lock-on button on the trigger switch to maintain continuous operation without holding the trigger. Press the trigger again to release the lock.
- เสร็จสิ้นการผสม: Once the material is uniformly mixed, release the trigger or the lock-on button. Lift the mixer out of the material only after the paddle has stopped rotating.
Figure 5: A user demonstrating the proper technique for mixing materials in a tub, holding the mixer firmly with both hands.
6. การบำรุงรักษาและการทำความสะอาด
Regular maintenance ensures the longevity and optimal performance of your mixer.
- ถอดปลั๊กเสมอ: Before any cleaning or maintenance, ensure the mixer is unplugged from the power supply.
- Cleaning the Paddle: Immediately after use, clean the mixing paddle thoroughly to prevent material from hardening on it. Hardened material can reduce mixing efficiency and damage the paddle.
- การทำความสะอาดตัวเครื่องผสม: เช็ดตัวมิกเซอร์ด้วยโฆษณาamp cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the motor housing.
- ช่องระบายอากาศ: Keep the ventilation slots clean and free from obstructions to prevent overheating.
- พื้นที่จัดเก็บ: Store the mixer in a dry, secure place, out of reach of children.
7 การแก้ไขปัญหา
หัวข้อนี้จะกล่าวถึงปัญหาทั่วไปที่คุณอาจพบเจอ
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| มิกเซอร์ไม่เริ่มทำงาน | No power supply; faulty power cable; trigger switch not pressed correctly. | Check power connection and outlet. Inspect power cable for damage. Ensure trigger is fully pressed. |
| Reduced mixing power or speed. | Overload; material too viscous; paddle clogged; incorrect gear selected. | Reduce load. Add more liquid to material if appropriate. Clean paddle. Select lower gear for higher torque. |
| การสั่นสะเทือนหรือเสียงรบกวนมากเกินไป | Loose paddle; bent paddle; internal damage. | Tighten paddle. Replace bent paddle. If problem persists, contact customer service. |
| ความร้อนสูงเกินไป | Blocked ventilation slots; continuous heavy load. | Clean ventilation slots. Allow mixer to cool down. Reduce mixing duration for heavy materials. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Einhell customer support.
8. ข้อมูลจำเพาะทางเทคนิค
- แบบอย่าง: TE-MX 1600-2 CE
- พลัง: 1600 วัตต์
- เล่มที่tage: 230 โวลต์
- Gear 1 Speed: 180 - 480 รอบต่อนาที
- Gear 2 Speed: 300 - 750 รอบต่อนาที
- ผู้ถือเครื่องมือ: M14
- ขนาด (ยาว x กว้าง x สูง): 31 x 32 x 20.2 ซม.
- น้ำหนัก: 3.48 กก.
- วัสดุ: Metal (housing components)
- ประเทศต้นกำเนิด: จีน
9. ข้อมูลการรับประกัน
Einhell products are manufactured with quality and care. This product is covered by the manufacturer's warranty in accordance with the laws of your country of residence. Please retain your proof of purchase for any warranty claims. The warranty covers defects in material and workmanship. It does not cover damage resulting from improper use, normal wear and tear, or unauthorized repairs.
10. การสนับสนุนลูกค้า
For technical assistance, spare parts, or service inquiries, please contact your local Einhell service center or visit the official Einhell website. Contact information can typically be found in the product packaging or on the Einhell webเว็บไซต์.
คุณสามารถเยี่ยมชม ร้านค้าแบรนด์ไอน์เฮลล์ สำหรับข้อมูลผลิตภัณฑ์เพิ่มเติม
