การแนะนำ
This manual provides detailed instructions for the installation, operation, and maintenance of the Dahua PFA122 Aluminum Junction Box. This junction box is designed to provide a secure and organized housing for wiring connections for compatible Dahua surveillance cameras, ensuring protection and a clean installation.
สินค้าเกินview
คุณสมบัติหลัก
- Durable aluminum construction for long-lasting performance.
- Specifically designed for various Dahua camera models, including CA-FW[G/R], HAC-HFW[S/R], HDC-HFW[C/S], IPC-HFW[C/S/R], CA-DW[E/F/H], IPC-HDW[S], and HAC-HDW[S/C].
- Compact dimensions of 134mm x 134mm x 55mm for discreet installation.
- จัดเตรียมให้ ample space for organized cable management and secure electrical connections.
ส่วนประกอบ
The PFA122 junction box package typically includes the main aluminum housing, a protective cover, and the necessary mounting hardware such as screws and sealing gaskets to ensure weather resistance.
คู่มือการติดตั้ง
ก่อนการติดตั้ง
- Ensure the chosen mounting surface is structurally sound and capable of supporting the combined weight of the junction box and the camera.
- Verify that the PFA122 junction box is compatible with your specific Dahua camera model.
- Gather all required tools, including a drill, screwdriver, measuring tape, and a pencil for marking.
ขั้นตอนการติดตั้ง
- Step 1: Mark Drilling Points. Carefully refer to the provided dimensional drawing for precise measurements. Use a pencil to accurately mark the locations for the four mounting screw holes on your installation surface.
- ขั้นตอนที่ 2: เจาะรู. Drill pilot holes at the marked locations. If mounting on a wall, insert appropriate wall anchors as required for secure fastening.
- Step 3: Secure the Junction Box Base. Align the base of the junction box with the drilled holes and firmly attach it to the surface using the provided screws. Ensure the base is stable and securely mounted.
- ขั้นตอนที่ 4: การจัดการสายเคเบิล. Route all necessary cables (e.g., power, video, data) through the designated cable entry points on the junction box. The design allows for either rear cable entry (through the mounting surface) or side cable entry (by removing a pre-punched blind stopper).
- ขั้นตอนที่ 5: เชื่อมต่อสายไฟ. Perform all required electrical connections inside the junction box. Ensure that all connections are secure, properly insulated, and comply with local electrical codes.
- ขั้นตอนที่ 6: ติดตั้งกล้อง. Attach your compatible Dahua camera to the junction box. Follow the specific mounting instructions provided with your camera. The junction box features standard mounting patterns for various Dahua camera models.
- Step 7: Close the Box. Securely fasten the junction box cover, ensuring that all seals and gaskets are correctly seated to maintain the enclosure's weather resistance.
การวาดแบบมิติ
This image displays the technical dimensions of the Dahua PFA122 Junction Box. The top view shows a width and length of 134.0 mm, with inner mounting points at 98.0 mm. Various circular mounting patterns are indicated with diameters of 56.0 mm, 70.0 mm, 84.0 mm, and 101.0 mm. The side view shows a depth of 55.0 mm. The bottom view indicates a width of 90.0 mm and mounting points spaced 48.0 mm apart, with four holes of 8.5 mm diameter.
การดำเนินการ
The Dahua PFA122 is a passive mounting accessory. Its primary function is to provide a secure and weather-protected enclosure for camera wiring and connections. Once properly installed, no direct operational steps are required for the junction box itself. For operational instructions related to the surveillance system, please refer to the manual of your specific Dahua camera.
การซ่อมบำรุง
- การตรวจสอบเป็นประจำ: Periodically inspect the junction box for any visible signs of physical damage, corrosion, or loose connections. Address any issues promptly to ensure continued protection.
- การทำความสะอาด: Clean the exterior surfaces of the junction box with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish or seals.
- ความสมบูรณ์ของซีล: Ensure that all seals and gaskets remain intact and properly seated, especially for outdoor installations, to prevent water ingress and maintain environmental protection. Replace any damaged seals immediately.
- ตรวจสอบตัวยึด: Verify that all mounting screws and fasteners are tight and secure to maintain a stable and safe installation.
การแก้ไขปัญหา
ปัญหาทั่วไปและแนวทางแก้ไข
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| น้ำภายในกล่อง | Improperly sealed cover or damaged gasket; unsealed cable entry points. | Re-seat the cover correctly, check and replace gaskets if damaged. Ensure all cable entries are properly sealed. |
| Loose camera attachment | Camera mounting screws not adequately tightened to the junction box. | Tighten all camera mounting screws securely to the junction box. |
| Junction box not secure | Loose wall mounting screws or inadequate wall anchors used. | Tighten wall mounting screws. If necessary, use stronger anchors or consider relocating the box to a more secure mounting surface. |
| Cable damage or malfunction | Cables pinched or improperly routed during installation. | Carefully inspect all cables for any signs of damage. Re-route cables to ensure they are not pinched or stressed. |
ข้อมูลจำเพาะทางเทคนิค
- แบบอย่าง: PFA122
- วัสดุ:อลูมิเนียม
- สี: สีขาว
- ขนาด (กว้าง x ยาว x สูง): 134mm x 134mm x 55mm (approximately 5.28 x 5.28 x 2.17 inches)
- น้ำหนักสินค้า: 0.01 Ounces (Note: This value is provided by the manufacturer; actual weight may vary slightly.)
- ความจุในการรับน้ำหนัก: 66 ปอนด์
- ประเภทการติดตั้ง: สกรูอิน
- ความเข้ากันได้: Applicable to bracket- CA-FW[G/R], HAC-HFW[S/R], HDC-HFW[C/S], IPC-HFW[C/S/R], CA-DW[E/F/H], IPC-HDW[S], HAC-HDW[S/C]
- ผู้ผลิต: Dahua OEM
- ยูพีซี: 737946864952
- วันที่พร้อมใช้งานครั้งแรก: 25 สิงหาคม 2015
การรับประกันและการสนับสนุน
For detailed warranty information, technical assistance, or customer support regarding your Dahua PFA122 Junction Box, please visit the official Dahua Technology website or contact your authorized Dahua dealer. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.
ผู้ผลิต: Dahua OEM
ASIN: B014FZM6P2
