1. สินค้าหมดview
The True 988284 Temperature Control Kit 077B6856 is a genuine Original Equipment Manufacturer (OEM) replacement part designed for True Refrigeration units. This kit ensures the proper regulation of temperature within your commercial refrigeration equipment, maintaining optimal operating conditions for safety, reliability, and performance.

ภาพที่ 1.1: จบแล้วview of the True 988284 Temperature Control Kit, showing the control unit, dial, and capillary tube.
คุณสมบัติหลัก:
- Genuine OEM replacement part for True Refrigeration.
- Designed for safety, reliability, and performance.
- Ensures accurate temperature regulation.
- Approved by the original equipment manufacturer.
2. ข้อมูลด้านความปลอดภัย
สำคัญ: Read all instructions carefully before installation or operation. Failure to follow these instructions may result in property damage, personal injury, or death.
- อันตรายจากไฟฟ้า: Always disconnect power to the refrigeration unit before attempting any installation, maintenance, or repair.
- บุคลากรที่ผ่านการรับรอง: Installation and servicing should only be performed by qualified and authorized service personnel.
- อะไหล่แท้: Use only genuine OEM parts for replacements to ensure compatibility, safety, and optimal performance.
- วัตถุประสงค์การใช้: This temperature control kit is intended solely for its specified designed usage within True Refrigeration equipment. Do not use for any other purpose.
- หลอดแคปิลลารี: Handle the capillary tube with care. Do not bend sharply or kink, as this can damage the sensor and affect performance.
3. เนื้อหาบรรจุภัณฑ์
ตรวจสอบให้แน่ใจว่าชิ้นส่วนทั้งหมดครบถ้วนและไม่เสียหายก่อนเปิดบรรจุภัณฑ์

Image 3.1: Contents of the True 988284 Temperature Control Kit, typically including the control module, temperature dial, mounting screws, and electrical connectors.
- Temperature Control Module with Capillary Tube
- ปุ่มปรับอุณหภูมิ
- สกรูยึด (โดยทั่วไป 2 ตัว)
- Electrical Connectors (typically 2)
- Instruction Sheet (if included by manufacturer)
4. คำแนะนำในการติดตั้ง
This section provides general guidance for replacing a temperature control kit. Specific installation steps may vary depending on your True Refrigeration model. Refer to your unit's service manual for detailed, model-specific instructions.
- ตัดการเชื่อมต่อไฟฟ้า: Locate the main power supply to the refrigeration unit and disconnect it. Verify that power is off using a voltagอีผู้ทดสอบ
- Access Control Area: Depending on your unit, you may need to remove access panels or grilles to reach the existing temperature control.
- การเดินสายเอกสาร: Before disconnecting any wires, take clear photos or make a diagram of the existing wiring connections to the old temperature control. Note the position of the capillary tube sensor.
- ลบการควบคุมเก่า:
- Carefully disconnect the electrical wires from the old control.
- Unmount the old control from its housing.
- Gently remove the capillary tube sensor from its sensing location (e.g., evaporator coil, air return).
- ติดตั้งระบบควบคุมใหม่:
- Insert the new capillary tube sensor into the exact same sensing location as the old one. Ensure it is securely positioned for accurate temperature readings. Avoid kinking or damaging the tube.
- Mount the new temperature control module in the same position as the old one using the provided screws.
- Connect the electrical wires to the new control according to your documented wiring diagram. Ensure connections are secure.
- ประกอบกลับเข้าที่: Replace any access panels or grilles that were removed.
- คืนค่าพลัง: Reconnect the main power supply to the refrigeration unit.
- การดำเนินการทดสอบ: Allow the unit to run for a period and monitor the temperature to ensure proper operation and temperature regulation. Adjust the dial as needed.
บันทึก: If you are unsure about any step, consult a qualified refrigeration technician.
5. คู่มือการใช้งาน
The temperature control kit features a rotary dial for adjusting the desired temperature within your True Refrigeration unit.
- การปรับอุณหภูมิ: Rotate the dial to select the desired temperature setting. Typically, rotating towards "Colder" or higher numbers (e.g., 6, 7, 8) will decrease the temperature, while rotating towards "Warmer" or lower numbers (e.g., 1, 2, 3) will increase it.
- การติดตาม: After adjusting the setting, allow several hours for the refrigeration unit to stabilize at the new temperature. Use an independent thermometer to verify the internal temperature.
- การตั้งค่าที่เหมาะสมที่สุด: The optimal setting will depend on the specific refrigeration unit and the products being stored. Adjust incrementally until the desired temperature range is consistently maintained.
6. การบำรุงรักษา
The True 988284 Temperature Control Kit is designed for durability and reliability. Regular maintenance of the overall refrigeration unit is crucial for its longevity and efficient operation.
- การตรวจสอบเป็นระยะ: Periodically inspect the control module and its wiring for any signs of wear, corrosion, or loose connections.
- หลอดแคปิลลารี: Ensure the capillary tube remains securely in its sensing location and is not damaged or kinked.
- การทำความสะอาด: Keep the area around the temperature control free from dust and debris. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive cleaners.
- การตรวจสอบอย่างมืออาชีพ: Consider annual professional maintenance checks for your refrigeration unit, which should include inspection of the temperature control system.
7 การแก้ไขปัญหา
If your refrigeration unit is experiencing temperature issues after installing this kit, consider the following common troubleshooting steps:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Unit not cooling or too warm |
|
|
| Unit freezing contents or too cold |
|
|
| อุณหภูมิผันผวนอย่างมาก |
|
|
คำเตือน: Do not attempt repairs beyond your technical capabilities. Always prioritize safety and consult a professional for complex issues.
8. ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| ยี่ห้อ | จริง |
| หมายเลขรุ่น | จริง988284 |
| ขนาดสินค้า | 6 x 6 x 4 นิ้ว |
| น้ำหนักสินค้า | 4.8 ออนซ์ |
| โหมดการทำงาน | อัตโนมัติ |
| ประเภทการติดต่อ | เปิดปกติ |
| ประเภทขั้วต่อ | ขั้วต่อสกรู |
| เทอร์มินัล | สกรู |
| ประเภทวงจร | 1 ทาง |
| ประเภทการติดตั้ง | การติดตั้งบนพื้นผิว |
| ประเภทตัวกระตุ้น | ปุ่มกด |
| วัสดุติดต่อ | ทองแดง, ทองเหลือง |
| วันที่พร้อมใช้งานครั้งแรก | วันที่ 15 มิถุนายน 2011 |
9. การรับประกันและการสนับสนุน
As a genuine OEM part, this True 988284 Temperature Control Kit is manufactured to high standards. For specific warranty information, please refer to the documentation provided with your original True Refrigeration unit or contact True Refrigeration directly.
การสนับสนุนลูกค้า:
For technical assistance, troubleshooting beyond this manual, or to inquire about warranty claims, please contact True Refrigeration customer support or an authorized service provider.
- ผู้ผลิต: จริง
- Webเว็บไซต์: www.truemfg.com
- หมายเลขรุ่น: จริง988284
- หมายเลขชิ้นส่วน: 988284, 077B6856





