1. บทนำ
This manual provides essential information for the safe and effective operation, setup, and maintenance of the Hilti GX120 Gas-Actuated Fastening Tool. The Hilti GX120 is a fully automatic, gas-powered fastening tool designed for high mobility and consistent fastening performance. It is suitable for attaching drywall track to concrete, concrete block, and steel surfaces. Please read this manual thoroughly before using the tool.
2. ข้อมูลด้านความปลอดภัย
ให้ความสำคัญกับความปลอดภัยเสมอเมื่อใช้งานเครื่องมือไฟฟ้า การไม่ปฏิบัติตามคำแนะนำด้านความปลอดภัยอาจส่งผลให้เกิดการบาดเจ็บสาหัสหรือความเสียหายต่อทรัพย์สิน
- อุปกรณ์ป้องกันส่วนบุคคล (PPE): Always wear appropriate PPE, including safety glasses, hearing protection, and gloves, when operating the tool.
- พื้นที่ทำงาน : Ensure the work area is clear of bystanders, well-lit, and free from obstructions.
- การตรวจสอบเครื่องมือ: Before each use, inspect the tool for any damage, loose parts, or malfunctions. Do not use a damaged tool.
- การจัดการถังแก๊ส: Handle gas canisters with care. Store them in a cool, well-ventilated area away from direct sunlight and ignition sources.
- การเลือกตัวยึด: Use only Hilti-approved fasteners and gas canisters compatible with the GX120.
- การทำงานของเครื่องมือ: Never point the tool at yourself or others. Keep hands and body parts away from the fastening point.
- การซ่อมบำรุง: Disconnect the gas canister and remove fasteners before performing any maintenance or cleaning.
3. ส่วนประกอบมากกว่าview
The Hilti GX120 consists of several key components that facilitate its operation. Understanding these components is crucial for proper use and maintenance.
รูปที่ 3.1: Hilti GX120 Gas-Actuated Fastening Tool. This image displays the complete tool, highlighting its red and black casing, the gas canister compartment at the rear, the trigger handle, the magazine for fasteners, and the nosepiece where fasteners are driven.
- จมูก: The part of the tool that contacts the work surface and guides the fastener. It is adjustable for optimum fastening quality.
- นิตยสาร: Holds the strip of fasteners.
- Gas Canister Compartment: Located at the rear, this houses the gas canister that provides the power for actuation.
- สิ่งกระตุ้น: Activates the fastening mechanism.
- รับมือ: Ergonomically designed for grip and control.
- Nail Punch Set: Included for specific applications.
4. การตั้งค่า
Proper setup ensures efficient and safe operation of the Hilti GX120.
- Insert Gas Canister: Open the gas canister compartment and insert a Hilti-approved gas canister. Ensure it is securely seated.
- Load Fasteners: Insert a strip of compatible fasteners into the tool's magazine. Ensure the fasteners are correctly oriented and the strip feeds smoothly. The tool supports fastener lengths from 9/16 to 1-9/16 inches.
- Adjust Tool Nose: Use the single lever on the tool nose to adjust its depth for the specific application and material. This adjustment is critical for achieving optimum fastening quality.
- เปิดเครื่อง: The tool features an automatic electronic gas injection system. Ensure the tool is ready for operation as indicated by the tool's status lights (if applicable, refer to tool markings).
5. คู่มือการใช้งาน
Follow these steps for safe and effective operation of the Hilti GX120.
- เตรียมพื้นผิวสำหรับทำงาน: Ensure the surface is clean, dry, and free from debris. Mark fastening points as needed.
- เครื่องมือจัดตำแหน่ง: Place the tool's nosepiece firmly and squarely against the work surface at the desired fastening point. Apply sufficient pressure to engage the safety mechanism.
- Actuate Tool: Press the trigger to drive the fastener. The fully automatic electronic gas injection system will ensure consistent fastening.
- Release and Reposition: Release the trigger and lift the tool from the surface. Reposition for the next fastening point.
- Monitor Gas and Fasteners: The tool can drive approximately 750 fasteners with a single gas can. Monitor gas levels and fastener supply to avoid interruptions.
Compatible Fastener Types: The Hilti GX120 uses fastener types X-EGN, X-GHP, and X-GN.
6. การบำรุงรักษา
Regular maintenance extends the life of your Hilti GX120 and ensures consistent performance.
- การทำความสะอาดรายวัน: After each use, clean the tool, especially the nosepiece and magazine area, to remove dust and debris. Use a dry cloth or brush.
- การตรวจสอบเป็นระยะ: Regularly inspect the tool for wear and tear, particularly the nosepiece, fasteners, and gas canister connections.
- พื้นที่จัดเก็บ: Store the tool in its case (included) in a dry, secure location away from extreme temperatures and unauthorized access. Remove the gas canister before long-term storage.
- การบริการระดับมืออาชีพ: For complex repairs or internal cleaning, contact authorized Hilti service centers. Do not attempt to disassemble the tool beyond basic user-level maintenance.
7 การแก้ไขปัญหา
This section addresses common issues you might encounter with the Hilti GX120.
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| เครื่องมือไม่ทำงาน | Empty gas canister; No fasteners in magazine; Tool not pressed firmly against surface; Safety mechanism not engaged. | Replace gas canister; Load fasteners; Apply firm pressure to the nosepiece; Ensure safety mechanism is fully engaged. |
| Inconsistent fastening depth | Incorrect nosepiece adjustment; Worn nosepiece; Low gas pressure. | Adjust nosepiece depth; Inspect and replace worn nosepiece; Replace gas canister. |
| Fasteners jam in magazine | Damaged fasteners; Debris in magazine; Incorrect fastener type. | Remove jammed fasteners and inspect for damage; Clean magazine; Ensure correct fastener type is used. |
8. ข้อมูลจำเพาะ
Key technical specifications for the Hilti GX120 Gas-Actuated Fastening Tool.
- หมายเลขรุ่นสินค้า: 274638
- น้ำหนักสินค้า: 16.86 ปอนด์
- ขนาดสินค้า : 17 x 5.3 x 15.4 นิ้ว
- แหล่งพลังงาน: ขับเคลื่อนด้วยก๊าซ
- เล่มที่tage: 110 Volts (for electronic ignition system, if applicable)
- ช่วงความยาวของตัวยึด: 9/16 ถึง 1-9/16 นิ้ว
- Compatible Fastener Types: X-EGN, X-GHP, X-GN
- Fasteners per Gas Can: ประมาณ 750
- ส่วนประกอบที่รวมอยู่: Tool, 1 GX 120 nail punch set, Z case
