Klipsch RP-260F

Klipsch RP-260F Floorstanding Speaker: User Manual

Model: RP-260F

1. สินค้าหมดview

The Klipsch RP-260F is a high-performance floorstanding speaker designed to deliver clear and dynamic audio for both music and home theater systems. It features advanced acoustic technologies to ensure a rich and immersive listening experience.

Klipsch RP-260F Floorstanding Speaker, front view พร้อมตะแกรง

รูปที่ 1 : ด้านหน้า view of the Klipsch RP-260F Floorstanding Speaker with its protective grille.

คุณสมบัติหลัก:

2. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่าบรรจุภัณฑ์มีส่วนประกอบทั้งหมด:

3. การตั้งค่า

3.1 การจัดวางลำโพง

การจัดวางลำโพงอย่างเหมาะสมมีความสำคัญอย่างยิ่งต่อคุณภาพเสียงที่ดีที่สุด โปรดพิจารณาแนวทางต่อไปนี้:

3.2 การเชื่อมต่อกับคุณ Amplifier/ผู้รับ

ก่อนทำการเชื่อมต่อใดๆ โปรดตรวจสอบให้แน่ใจว่า... amplifier or receiver is turned off and unplugged from the power outlet.

  1. เตรียมสายลำโพง: Strip approximately 1/2 inch (12mm) of insulation from the ends of your speaker wire. Twist the bare wire strands tightly.
  2. ระบุขั้ว: Speaker wires are typically color-coded or marked to indicate positive (+) and negative (-) polarity. Maintain consistent polarity throughout your system.
  3. เชื่อมต่อกับลำโพง: Connect the positive (+) terminal (red) on the speaker to the positive (+) speaker output terminal on your amplifier/receiver. Connect the negative (-) terminal (black) on the speaker to the negative (-) speaker output terminal on your amplifier/เครื่องรับ.
  4. การเชื่อมต่อที่ปลอดภัย: Ensure all connections are tight to prevent loose wires, which can cause short circuits or poor sound quality.
หลัง view of Klipsch RP-260F speaker showing input terminals

รูปที่ 2: ด้านหลัง view illustrating the speaker input terminals for connection.

4. การใช้งานลำโพงของคุณ

Once properly connected, your Klipsch RP-260F speaker will reproduce audio from your amplifier or receiver. The operation of the speaker itself is passive, meaning it does not have active controls. All adjustments, such as volume, tone, and source selection, are managed through your connected audio equipment.

5. การบำรุงรักษา

To ensure the longevity and appearance of your Klipsch RP-260F speakers, follow these maintenance guidelines:

6 การแก้ไขปัญหา

If you encounter issues with your Klipsch RP-260F speaker, refer to the following common problems and solutions:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ไม่มีเสียงออกจากลำโพง
  • สายลำโพงหลวมหรือต่อไม่ถูกต้อง
  • Ampเครื่องขยายเสียง/เครื่องรับสัญญาณไม่ได้เปิดอยู่ หรือเลือกอินพุตไม่ถูกต้อง
  • วงจรป้องกันลำโพงทำงานแล้ว
  • ตรวจสอบการเชื่อมต่อสายลำโพงทั้งหมดทั้งที่ลำโพงและ amplifier, ensuring correct polarity and tightness.
  • ตรวจสอบ ampการเลือกกำลังไฟของเครื่องขยาย/เครื่องรับและอินพุต
  • ปิดและถอดปลั๊ก amplifier/receiver for a few minutes, then restart.
เสียงผิดเพี้ยนหรือไม่ชัดเจน
  • การเปิดเสียงดังเกินไป (ระดับเสียงดังเกินไป)
  • การเชื่อมต่อสายลำโพงหลวม
  • แหล่งกำเนิดเสียงคุณภาพต่ำ
  • ชิ้นส่วนลำโพงเสียหาย
  • ลดระดับเสียงลง amplifier/เครื่องรับ.
  • Check speaker wire connections for tightness and correct polarity.
  • Test with a different audio source or higher quality recording.
  • หากปัญหายังคงอยู่ โปรดติดต่อฝ่ายบริการลูกค้า
ความสมดุลของเสียงไม่สม่ำเสมอ
  • ตำแหน่งลำโพงไม่ถูกต้อง
  • Amplifier/receiver balance settings.
  • One speaker not functioning correctly.
  • Review speaker placement guidelines in Section 3.1.
  • Check and adjust the balance settings on your amplifier/เครื่องรับ.
  • Swap the speakers' positions to determine if the issue follows the speaker or remains with the channel.

If the problem persists after attempting these solutions, please contact Klipsch customer support.

7. ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
ชื่อรุ่นRP260F
ประเภทลำโพงFloorstanding
เส้นผ่านศูนย์กลางวูฟเฟอร์คู่ 6.5 นิ้ว
ประเภททวีตเตอร์1" Linear Travel Suspension Titanium Tweeter
ประเภทเขา90x90 Hybrid Tractrix Horn
ประเภทพอร์ตTractrix Port
วัสดุของตู้MDF with Brushed Polymer Veneer Baffle Finish
กำลังขับสูงสุดของลำโพง500 วัตต์
เทคโนโลยีการเชื่อมต่อมีสาย
โหมดเอาต์พุตเสียงสเตอริโอ
ประเภทการติดตั้งชั้นเมา
สีไม้มะเกลือ
ขนาดสินค้า (กว้าง x ยาว x สูง)17.65 x 9.01 x 39.6 นิ้ว
น้ำหนักสินค้า49.5 ปอนด์
ยูพีซี743878027631

8. ข้อมูลด้านความปลอดภัย

9. การรับประกันและการสนับสนุน

The Klipsch RP-260F Floorstanding Speaker comes with a Full Warranty. For specific terms and conditions of your warranty, please refer to the documentation provided with your purchase or visit the official Klipsch webเว็บไซต์.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Klipsch Customer Support through their official webไซต์หรือข้อมูลการติดต่อที่ให้ไว้ในบรรจุภัณฑ์ผลิตภัณฑ์ของคุณ

เอกสารที่เกี่ยวข้อง - อาร์พี-260เอฟ

พรีview คู่มือผู้ใช้ลำโพง Klipsch Reference Premiere
คู่มือผู้ใช้ลำโพง Klipsch Reference Premiere ครอบคลุมข้อมูลการตั้งค่า การจัดวาง การเชื่อมต่อ การดูแลรักษา และการรับประกัน มีข้อมูลจำเพาะและแผนผังโดยละเอียดสำหรับรุ่นต่างๆ ได้แก่ RP-8060FA, RP-8000F, RP-6000F, RP-5000F, RP-4000F, RP-600M, RP-500M, RP-400M, RP-502S, RP-402S, RP-500SA, RP-504C, RP-404C, RP-600C, RP-500C และ RP-400C
พรีview คู่มือผู้ใช้และข้อมูลจำเพาะของลำโพง Klipsch Reference Premiere Series
คู่มือการใช้งานฉบับสมบูรณ์ คู่มือการติดตั้ง และข้อมูลจำเพาะทางเทคนิคสำหรับลำโพงโฮมเธียเตอร์ Klipsch Reference Premiere series เรียนรู้เกี่ยวกับการจัดวางในห้อง การเชื่อมต่อ เทคโนโลยี Dolby Atmos การดูแลรักษา และรายละเอียดผลิตภัณฑ์
พรีview คู่มือผู้ใช้ Klipsch Reference Premiere Series - การตั้งค่า การจัดวาง และการเชื่อมต่อ
คู่มือผู้ใช้ฉบับสมบูรณ์สำหรับลำโพง Klipsch Reference Premiere Series ครอบคลุมการตั้งค่า การจัดวางตำแหน่งห้อง คู่มือการเชื่อมต่อ การรวมระบบเสียง Dolby Atmos การดูแลรักษา และการลงทะเบียนผลิตภัณฑ์ ประกอบด้วยรายละเอียดรุ่นสำหรับ RP-8060FA, RP-8000F, RP-6000F, RP-5000F, RP-4000F, RP-600M, RP-500M, RP-400M, RP-502S, RP-402S, RP-500SA, RP-504C, RP-404C, RP-600C, RP-500C, RP-400C และ RP-160M
พรีview คู่มือผู้ใช้ซับวูฟเฟอร์ Klipsch Reference Premiere
คู่มือผู้ใช้นี้ให้ข้อมูลโดยละเอียดเกี่ยวกับซับวูฟเฟอร์ซีรีส์ Klipsch Reference Premiere รวมถึงการตั้งค่า การเชื่อมต่อ การควบคุม และคำแนะนำในการดูแลรักษา เรียนรู้วิธีเพิ่มประสิทธิภาพประสบการณ์เสียงของคุณด้วยซับวูฟเฟอร์ประสิทธิภาพสูงเหล่านี้
พรีview ลำโพง Klipsch Reference Premiere: คู่มือการตั้งค่า ความปลอดภัย และการรับประกัน
คู่มือครอบคลุมสำหรับลำโพง Klipsch Reference Premiere ครอบคลุมถึงการระบุรุ่น การจัดวางห้อง วิธีการเชื่อมต่อ การตั้งค่า Dolby Atmos คำแนะนำในการดูแล การลงทะเบียนผลิตภัณฑ์ แนวทางด้านความปลอดภัยที่สำคัญ และข้อมูลการรับประกัน
พรีview Klipsch RP-440D SB 3-Channel LCR Soundbar: Owner's Manual & Specifications
Detailed owner's manual and specifications for the Klipsch RP-440D SB 3-channel passive LCR soundbar. Learn about installation, setup, features, and care for your Klipsch Reference Premiere speaker.