การแนะนำ
This manual provides detailed instructions for the installation and proper use of the Metra 95-8215S Double DIN Dash Kit. This kit is designed to facilitate the installation of an aftermarket Double DIN car stereo into specific 2005-2010 Toyota Avalon vehicles, ensuring a factory-matched appearance and secure fit.
ข้อมูลด้านความปลอดภัย
- ควรตัดการเชื่อมต่อขั้วลบของแบตเตอรี่รถยนต์ทุกครั้งก่อนเริ่มการติดตั้งระบบไฟฟ้า เพื่อป้องกันการลัดวงจรและความเสียหาย
- ตรวจสอบให้แน่ใจว่าการเชื่อมต่อทั้งหมดมีความปลอดภัยและมีฉนวนป้องกันอย่างเหมาะสมเพื่อป้องกันอันตรายจากไฟฟ้า
- Refer to your vehicle's service manual for specific dashboard disassembly and reassembly procedures.
- สวมอุปกรณ์ป้องกันส่วนบุคคลที่เหมาะสม เช่น แว่นตานิรภัย ระหว่างการติดตั้ง
- หากคุณไม่แน่ใจเกี่ยวกับขั้นตอนการติดตั้งส่วนใดส่วนหนึ่ง โปรดปรึกษาผู้ติดตั้งมืออาชีพที่มีคุณสมบัติเหมาะสม
เนื้อหาแพ็คเกจ
ตรวจสอบว่าส่วนประกอบทั้งหมดมีอยู่ก่อนเริ่มการติดตั้ง:
- Double DIN Dash Bezel (Silver)
- ขายึดด้านซ้าย
- ขายึดด้านขวา
- คู่มือการใช้งาน (เอกสารนี้)

Image 1: Metra 95-8215S Double DIN Dash Bezel. This is the main silver trim piece that will surround your new radio.

Image 2: Left and Right Mounting Brackets. These black plastic brackets secure the aftermarket radio to the dash kit.
ความเข้ากันได้
This dash kit is specifically designed for the following vehicles:
- Toyota Avalon: 2005, 2006, 2007, 2008, 2009, 2010
It accommodates ISO Double DIN mount aftermarket radios.
การติดตั้งและการตั้งค่า
เครื่องมือที่จำเป็น:
- เครื่องมือกำจัดแผง
- ไขควง (แฉกและหัวแบน)
- ชุดประแจซ็อกเก็ต
- Wire Strippers/Crimpers (if installing a new wiring harness)
- เทปไฟฟ้าหรือท่อหดความร้อน
หมายเหตุก่อนการติดตั้ง:
- A separate wiring harness (e.g., Metra 70-1761, TYTO-01) and antenna adapter may be required for your specific vehicle and aftermarket radio. These are not included with this dash kit.
- For 2007+ Toyota Avalon models, the factory radio cannot be permanently removed as it controls the information display. It must be relocated, typically to the trunk, and a separate extension harness (e.g., Metra 70-8215) is needed for this purpose.
ขั้นตอนการติดตั้ง:
- ถอดแบตเตอรี่: Before starting, disconnect the negative terminal of the vehicle's battery.
- Remove Factory Radio/Dash Panels:
- Carefully use a panel removal tool to pry off the trim panels surrounding the factory radio.
- Unscrew and remove the factory radio unit. Disconnect all wiring harnesses and antenna cables.
- For 2007+ Avalon models, if relocating the factory radio, ensure the necessary extension harness is connected and routed.
- Prepare Aftermarket Radio:
- Connect the aftermarket radio's wiring harness to the vehicle's wiring harness (using an adapter if necessary). Ensure all connections are secure.
- Connect the antenna adapter to the aftermarket radio and the vehicle's antenna cable.
- Attach Mounting Brackets to Radio:
- Secure the provided left and right mounting brackets to the sides of your aftermarket Double DIN radio using the screws supplied with your radio. Ensure the radio is centered and flush with the front of the brackets.
- Attach Dash Bezel to Radio Assembly:
- Slide the radio assembly (with brackets attached) into the Metra 95-8215S dash bezel. The brackets should snap or screw into place within the bezel, creating a single unit.
- Verify that the radio sits flush and securely within the dash bezel, creating a "gapless fit."
- Install New Radio Assembly into Dash:
- Connect the prepared wiring harnesses and antenna cable to the aftermarket radio.
- Carefully slide the entire radio and dash kit assembly into the vehicle's dashboard opening.
- Secure the assembly using the factory screws or clips that held the original radio.
- Reassemble Dash Panels: Reattach any removed trim panels, ensuring they snap securely into place.
- เชื่อมต่อแบตเตอรี่อีกครั้ง: เชื่อมต่อขั้วลบของแบตเตอรี่รถยนต์อีกครั้ง
- ทดสอบฟังก์ชันการทำงาน: Turn on the vehicle and test the new aftermarket radio to ensure all functions (power, audio, balance, fader, radio reception) are working correctly.
การดำเนินงาน
The Metra 95-8215S Dash Kit provides a secure and aesthetically integrated mounting solution for your aftermarket Double DIN radio. Once installed, the operation of your audio system will be controlled entirely by the features and functions of your specific aftermarket radio unit.
การซ่อมบำรุง
- การทำความสะอาด: To clean the dash kit, use a soft, damp ใช้ผ้าเช็ดทำความสะอาด หลีกเลี่ยงน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลาย เพราะอาจทำให้พื้นผิวเสียหายได้
- การตรวจสอบ: Periodically check the dash kit and radio for any signs of looseness or damage. Ensure all mounting screws remain tight.
การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Dash kit does not fit correctly or has gaps. | Incorrect vehicle model/year; improper alignment during installation; aftermarket radio dimensions slightly off. |
|
| Aftermarket radio is loose within the dash kit. | Mounting screws not tightened; brackets not properly secured to radio or bezel. |
|
| No power to the aftermarket radio after installation. | Battery disconnected; wiring harness issues; blown fuse. |
|
ข้อมูลจำเพาะ
- หมายเลขรุ่น: 95-8215วินาที
- วัสดุ: High-grade ABS Plastic (Acrylonitrile Butadiene Styrene)
- สี: Silver (Factory matched texture style)
- ความเข้ากันได้: โตโยต้า อวาลอน 2005-2010
- ประเภทวิทยุ: Double DIN (ISO Mount)
- ขนาดสินค้า (กว้าง x ยาว x สูง) : ประมาณ 14 x 7.1 x 1 นิ้ว
- น้ำหนักสินค้า: ประมาณ 4.8 ออนซ์
- ผู้ผลิต: บริษัท เมตรา อิเล็กทรอนิกส์
- ยูพีซี: 086429299249
ข้อมูลการรับประกัน
Metra products are designed for quality and durability. For specific warranty terms and conditions, please refer to the official Metra website or contact Metra customer support. Keep your purchase receipt as proof of purchase.
สนับสนุน
For technical assistance or further inquiries regarding the Metra 95-8215S Dash Kit, please visit the official Metra webเยี่ยมชมเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าของพวกเขา โดยทั่วไปแล้ว ข้อมูลการติดต่อจะพบได้ในเว็บไซต์ของผู้ผลิต webบรรจุภัณฑ์ไซต์หรือผลิตภัณฑ์
Note: This manual provides general installation guidelines. Specific vehicle disassembly and reassembly procedures may vary. Always consult your vehicle's service manual for precise instructions.