Connects2 CTSSA002.2

CTSSA002.2 Car Accessory User Manual

Model: CTSSA002.2

1. สินค้าหมดview

The Connects2 CTSSA002.2 is a specialized car accessory designed to facilitate the integration of aftermarket car audio systems with the existing steering wheel controls of specific SAAB vehicle models. This interface ensures that the original steering wheel buttons, such as volume control, track skip, and mode selection, remain functional after upgrading your car's head unit.

คุณสมบัติหลัก:

  • Enables steering wheel control functionality with aftermarket head units.
  • Designed for SAAB 43533 (1998 - 2002) and SAAB 43594 (1998 - 2002) models.
  • Excludes vehicles with automatic transmission.
  • Official Connects2 brand product, known for interface solutions.
Connects2 CTSSA002.2 Car Accessory with wiring harnesses

Image: The Connects2 CTSSA002.2 Car Accessory. This image displays the main electronic module, which is black and rectangular with the 'Connects2' logo, along with various multi-colored wiring harnesses and connectors. These components are essential for connecting the accessory to the vehicle's electrical system and the aftermarket head unit.

2. การตั้งค่าและการติดตั้ง

Installation of the CTSSA002.2 requires basic knowledge of car audio wiring and vehicle electronics. It is recommended that installation be performed by a qualified professional.

  1. การตระเตรียม: Ensure the vehicle's ignition is off and disconnect the negative terminal of the car battery to prevent electrical shorts.
  2. การเดินสายไฟสำหรับยานพาหนะ: Carefully remove the existing car stereo or access the vehicle's wiring harness behind the dashboard. Refer to your vehicle's service manual for specific instructions on accessing these components.
  3. ระบุการเชื่อมต่อ: Identify the vehicle's factory wiring harness for the steering wheel controls and power.
  4. เชื่อมต่ออินเทอร์เฟซ: Connect the CTSSA002.2 accessory's wiring harnesses to the corresponding vehicle wiring and the aftermarket head unit. Ensure all connections are secure and correctly matched according to the wiring diagram provided with your specific head unit and the Connects2 accessory (if a separate diagram is included).
  5. ส่วนประกอบที่ปลอดภัย: Once all connections are made, secure the CTSSA002.2 module and excess wiring to prevent rattling or interference.
  6. ทดสอบฟังก์ชันการทำงาน: Reconnect the car battery. Turn on the ignition and the aftermarket head unit. Test all steering wheel control functions (volume up/down, track skip, mode, etc.) to ensure they operate correctly.
  7. ประกอบกลับเข้าที่: ประกอบชิ้นส่วนแผงหน้าปัดกลับเข้าที่อย่างระมัดระวัง

สำคัญ: This accessory is compatible with SAAB 43533 (1998 - 2002) and 43594 (1998 - 2002) models. It is not compatible with vehicles equipped with automatic transmission.

3. คู่มือการใช้งาน

Once the CTSSA002.2 Car Accessory is correctly installed, its operation is seamless and integrated with your vehicle's existing steering wheel controls. The accessory acts as a bridge, translating the signals from your factory steering wheel buttons into commands that your aftermarket head unit can understand.

เพื่อดำเนินการ:

  • Ensure your aftermarket head unit is powered on.
  • Use the steering wheel buttons as you normally would for functions such as:
    • เพิ่ม/ลดระดับเสียง
    • Track Next/Previous
    • การเลือกโหมด/แหล่งที่มา
    • Mute (if applicable)
  • The response of the head unit to these commands should be immediate and accurate.

No direct interaction with the CTSSA002.2 module itself is required during normal operation.

4. การบำรุงรักษา

The Connects2 CTSSA002.2 Car Accessory is designed for long-term, maintenance-free operation. As an electronic interface, it requires minimal upkeep.

  • ให้แห้ง: Ensure the module remains dry and is not exposed to moisture or extreme temperatures.
  • การเชื่อมต่อที่ปลอดภัย: Periodically, if accessible, check that all wiring connections remain secure and free from corrosion. Loose connections can lead to intermittent functionality.
  • การทำความสะอาด: If the module becomes dusty, gently wipe it with a dry, soft cloth. Do not use liquid cleaners or solvents.

No user-serviceable parts are inside the unit. Do not attempt to open or repair the accessory.

5 การแก้ไขปัญหา

If you encounter issues with your CTSSA002.2 Car Accessory, please refer to the following troubleshooting guide:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
การควบคุมพวงมาลัยไม่ทำงานการเชื่อมต่อสายไฟไม่ถูกต้อง
Incompatible head unit or vehicle.
Head unit not configured for steering wheel controls.
Double-check all wiring connections against the installation guide.
Verify your vehicle and head unit compatibility.
Consult your head unit's manual for steering wheel control setup.
Intermittent control response.การเชื่อมต่อที่หลวม
การรบกวนทางไฟฟ้า
Ensure all connections are firmly seated.
Check for any exposed wires or poor insulation.
Only some controls work.Incorrect programming/mapping.
Head unit limitation.
Some aftermarket head units require programming of steering wheel buttons. Refer to your head unit's manual.
Not all steering wheel buttons may be supported by every aftermarket head unit.
No power to the accessory.ฟิวส์ขาด
การเชื่อมต่อสายไฟไม่ถูกต้อง
Check the vehicle's fuse box and any inline fuses for the head unit/accessory.
Verify the power and ground connections are correct and secure.

If the problem persists after following these steps, please contact Connects2 customer support or a qualified installer.

6. ข้อมูลจำเพาะ

คุณลักษณะรายละเอียด
ยี่ห้อเชื่อมต่อ2
แบบอย่างCTSSA002.2
น้ำหนักสินค้า4.2 ออนซ์
ขนาดสินค้า11.81 x 9.84 x 1.97 นิ้ว
หมายเลขชิ้นส่วนของผู้ผลิตCTSSA002.2
ASINB00MQRFRN0
ความเข้ากันได้SAAB 43533 (1998 - 2002), SAAB 43594 (1998 - 2002) - Excluding vehicles with automatic transmission
ส่วนประกอบที่รวมอยู่Car accessory (interface module and wiring)
วันที่พร้อมใช้งานครั้งแรกวันที่ 15 สิงหาคม 2014

7. ข้อมูลการรับประกัน

The Connects2 CTSSA002.2 Car Accessory comes with a รับประกัน 2 ปี on any new Connects2 component. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For specific warranty terms and conditions, or to initiate a warranty claim, please refer to the official Connects2 webไซต์หรือติดต่อฝ่ายสนับสนุนลูกค้าของพวกเขา

8. การสนับสนุนและการติดต่อ

For further assistance, technical support, or inquiries regarding the CTSSA002.2 Car Accessory, please contact Connects2 through their official channels:

  • เป็นทางการ Webเว็บไซต์: เยี่ยมชม เชื่อมต่อ2 webเว็บไซต์ สำหรับข้อมูลผลิตภัณฑ์ คำถามที่พบบ่อย และแหล่งข้อมูลสนับสนุน
  • Global Network: Connects2 operates through a global network of retailers and distributors. You may contact your local retailer or distributor for immediate support.
  • บริการลูกค้า: Refer to the Connects2 website for direct customer service contact information, including phone numbers or email addresses.

When contacting support, please have your product model (CTSSA002.2) and vehicle details readily available.

เอกสารที่เกี่ยวข้อง - CTSSA002.2

พรีview คู่มือการติดตั้ง Connects2 UNI-SWC.4 อุปกรณ์ควบคุมพวงมาลัยอเนกประสงค์
คู่มือการใช้งานฉบับสมบูรณ์สำหรับ Connects2 UNI-SWC.4 ซึ่งประกอบด้วยรายละเอียดเกี่ยวกับการติดตั้ง การเชื่อมต่ออินเทอร์เฟซ การตั้งค่า DIP Switch และข้อมูลการเดินสายไฟเฉพาะรุ่นรถยนต์สำหรับรถยนต์ CAN-Bus และรถยนต์อนาล็อก
พรีview คู่มือการใช้งานอินเทอร์เฟซการควบคุมพวงมาลัยของ Connects2 CTSNS017.2 Nissan
คู่มือการใช้งาน Connects2 CTSNS017.2 ซึ่งเป็นอินเทอร์เฟซควบคุมพวงมาลัยที่ออกแบบมาเพื่อคงไว้ซึ่งการควบคุมพวงมาลัยดั้งเดิมในรถยนต์นิสสัน ครอบคลุมการติดตั้ง การเดินสาย และความเข้ากันได้กับรุ่นต่างๆ รวมถึง X-Trail, Almera, Primera และ Terrano
พรีview Connects2 CTSSA002.2 Saab Steering Wheel Control Interface Installation Guide
Installation guide and technical information for the Connects2 CTSSA002.2 interface, enabling Saab 9-3 (YS3F) and 9-5 (1998-2002) vehicles to retain steering wheel control functionality with aftermarket head units. Includes wiring codes and fitting instructions.
พรีview 29-CTSNS021 Steering Wheel Control Interface for Nissan Vehicles - Installation Guide
Installation guide for the 29-CTSNS021 Steering Wheel Control Interface for Nissan vehicles. This interface retains factory steering wheel controls, reverse camera, and aux/USB inputs, and provides speed pulse, park brake, and reverse gear outputs for Nissan Micra 2017> models.
พรีview Connects2 CTSTY009.2 Toyota Steering Wheel Control Interface - Installation Manual
Instruction manual for the Connects2 CTSTY009.2, a steering wheel control interface for analogue Toyota vehicles. It retains Aux, USB, OEM Camera, and JBL Amplifier functions, and supports both 20-pin and 28-pin connectors for easy installation.
พรีview คู่มือการติดตั้งอินเทอร์เฟซควบคุมพวงมาลัย Connects2 CTSPG007.2 Peugeot
เอกสารนี้ให้คำแนะนำในการติดตั้งและรายละเอียดผลิตภัณฑ์สำหรับ Connects2 CTSPG007.2 CAN-Bus Steering Wheel Control Interface ซึ่งออกแบบมาสำหรับรถยนต์ Peugeot บางรุ่น ครอบคลุมการใช้งานรถยนต์ คุณสมบัติหลัก รหัสสายไฟ ขั้นตอนการติดตั้ง และฟังก์ชันการควบคุมพวงมาลัย