Flexson FLXP1WB2021

Flexson FLXP1WB2021 Wall Bracket for Sonos Play:1 Speakers

คู่มือการใช้งาน

การแนะนำ

This manual provides instructions for the safe and proper installation and use of your Flexson FLXP1WB2021 Wall Bracket, designed specifically for Sonos Play:1 speakers. Please read this manual thoroughly before installation and retain it for future reference.

ข้อมูลด้านความปลอดภัย

คำเตือน:

Improper installation can lead to equipment damage or personal injury. If you are unsure about the installation process, consult a qualified professional.

  • Ensure the wall material is suitable for supporting the weight of the bracket and speaker.
  • Use appropriate wall mounting hardware (screws and anchors) for your specific wall type. Wall mounting hardware is not included with this product.
  • Do not exceed the maximum weight capacity of the bracket. This bracket is designed for Sonos Play:1 speakers only.
  • เก็บชิ้นส่วนเล็ก ๆ ให้ห่างจากมือเด็ก

เนื้อหาแพ็คเกจ

ตรวจสอบว่าส่วนประกอบทั้งหมดมีอยู่ก่อนเริ่มการติดตั้ง:

  • 2 x Flexson Wall Brackets (FLXP1WB2021)
  • คู่มือการใช้งาน (เอกสารนี้)

บันทึก: Sonos Play:1 speakers and wall mounting hardware (screws, anchors) are not included.

การติดตั้งและการตั้งค่า

Follow these steps to install your Flexson wall bracket:

  1. เตรียมสถานที่ติดตั้ง: Choose a suitable wall location, ensuring it can support the weight of the speaker and bracket. Mark the desired drilling points for the wall bracket.
  2. เจาะรูนำ: Using an appropriate drill bit for your wall type and chosen mounting hardware, drill pilot holes at the marked locations.
  3. ติดตั้งขายึดติดผนัง: Securely fasten the wall bracket to the wall using suitable screws and wall anchors (not supplied). Ensure the bracket is level and firmly attached.
  4. Attach Speaker to Bracket: The Flexson bracket features a unique 2-piece design for easy assembly. Align your Sonos Play:1 speaker with the bracket's mounting points. The bracket allows for neat cable routing.
  5. ลำโพงที่ปลอดภัย: Use the provided screw to secure the Sonos Play:1 speaker to the bracket. Ensure it is tightened sufficiently to hold the speaker firmly.
  6. การจัดการสายเคเบิล: Route the speaker's power cable neatly through the designated channels on the bracket to maintain a clean appearance.
Two black Flexson wall brackets for Sonos Play:1 speakers, showing the front with branding and model number.

Figure 1: Flexson FLXP1WB2021 Wall Brackets. These brackets are designed to securely hold Sonos Play:1 speakers.

Technical drawing showing dimensions of the Flexson wall bracket for Sonos Play:1, including side, front, and back viewโดยมีหน่วยวัดเป็นมิลลิเมตร

Figure 2: Dimensional drawing of the Flexson wall bracket, illustrating various measurements for installation planning.

การใช้งานและการปรับแต่ง

Once installed, the Flexson wall bracket offers flexible positioning for your Sonos Play:1 speaker:

  • เอียง: The bracket allows for a 15° downward tilt, enabling you to direct sound towards your listening area.
  • หมุน: You can swivel the speaker 40° left and 40° right to optimize sound dispersion.
  • การติดตั้งแบบกลับด้าน: The bracket supports mounting the speaker upside down. This feature allows easier access to the speaker's on-device controls when mounted higher on a wall.

การซ่อมบำรุง

To maintain the appearance and functionality of your Flexson wall bracket:

  • Clean the bracket with a soft, dry cloth.
  • Avoid using abrasive cleaners or solvents, as these may damage the finish.
  • Periodically check all mounting screws to ensure they remain tight and secure.

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Speaker feels unstable or loose.Mounting screws are not tight enough, or incorrect wall anchors were used.Ensure all wall mounting screws and the speaker attachment screw are securely tightened. Verify that appropriate wall anchors were used for your wall type.
ปรับมุมเอียงหรือหมุนได้ยากMechanism may be stiff or overtightened.Apply gentle force. Do not force adjustments if resistance is excessive. Check for any obstructions.

ข้อมูลจำเพาะ

  • หมายเลขรุ่น: FLXP1WB2021
  • ความเข้ากันได้: Sonos Play:1 Speakers
  • วัสดุ: เหล็ก
  • สี: สีดำ
  • การปรับเอียง: 15° downwards
  • การปรับหมุน: ซ้าย 40° ขวา 40°
  • ขนาดสินค้า : 5.47 x 3.62 x 1.77 นิ้ว (139 x 92 x 45 มม.)
  • น้ำหนักสินค้า: 7 ออนซ์ (198 กรัม)
  • ผู้ผลิต: เฟล็กซ์สัน

การรับประกันและการสนับสนุน

สำหรับข้อมูลการรับประกันและการสนับสนุนทางเทคนิค โปรดดูที่เว็บไซต์อย่างเป็นทางการของ Flexson webหรือติดต่อผู้ค้าปลีกของคุณ เก็บหลักฐานการซื้อไว้เพื่อใช้ในการเรียกร้องการรับประกัน

เอกสารที่เกี่ยวข้อง - FLXP1WB2021

พรีview Flexson P5-WMV ขาแขวนติดผนังแนวตั้งสำหรับ Sonos PLAY:5 / Five - คู่มือการติดตั้ง
คู่มือการติดตั้งอย่างเป็นทางการสำหรับขาแขวนติดผนังแบบแนวตั้ง Flexson P5-WMV ออกแบบมาสำหรับลำโพง Sonos PLAY:5 และ Sonos Five ประกอบด้วยคำเตือนด้านความปลอดภัย รายการชิ้นส่วน และคำแนะนำการประกอบแบบทีละขั้นตอนสำหรับการติดตั้งบนผนังอย่างมั่นคง
พรีview คู่มือการติดตั้งขาตั้งติดผนัง Flexson E300WM สำหรับลำโพง SONOS ERA 300
คู่มือการติดตั้งโดยละเอียดสำหรับขาตั้งติดผนัง Flexson E300WM ซึ่งออกแบบมาสำหรับลำโพง SONOS ERA 300 ประกอบด้วยคำเตือนด้านความปลอดภัย อุปกรณ์ที่จำเป็น และคำแนะนำทีละขั้นตอนสำหรับการติดตั้งบนผนังอิฐ ผนังปูน หรือโครงไม้
พรีview คู่มือการติดตั้ง Flexson E100WM แบบติดผนังสำหรับ Sonos Era 100
คำแนะนำโดยละเอียดสำหรับการติดตั้งขาแขวนติดผนัง Flexson E100WM สำหรับลำโพง Sonos Era 100 ครอบคลุมทั้งการติดตั้งบนโครงสร้างก่ออิฐและโครงไม้
พรีview ขาตั้งเพดาน Flexson S1-CM สำหรับ Sonos One, One SL, Play:1 - สินค้าหมดview และข้อมูลจำเพาะ
ข้อมูลโดยละเอียดเกี่ยวกับขาตั้งลำโพงติดเพดาน Flexson S1-CM สำหรับลำโพง Sonos One, One SL และ Play:1 คุณสมบัติเด่น ได้แก่ โครงสร้างเหล็กคุณภาพสูง ปรับเอียงและหมุนได้ และระบบจัดการสายเคเบิลในตัว มีให้เลือกทั้งสีขาวและสีดำ