การแนะนำ
This manual provides essential information for the proper handling, installation, and maintenance of the Honda 90004-GHB-720 Flange Bolt. This component is an original Honda part designed for specific applications, ensuring optimal performance and fit within Honda systems. Adherence to these instructions is crucial for safety and the longevity of the assembly.
การระบุผลิตภัณฑ์
The Honda 90004-GHB-720 Flange Bolt is identifiable by its part number and the official Honda packaging. Always verify the part number against your vehicle's or equipment's specifications before installation.
Image: Official packaging label for the Honda 90004-GHB-720 Flange Bolt. This label confirms the part is a genuine Honda component, made in Japan, and includes the part number for verification.
แนวทางการติดตั้ง
Proper installation is critical for the performance and safety of the flange bolt. Consult your specific vehicle or equipment service manual for detailed, application-specific instructions and torque specifications.
- การตระเตรียม: Ensure mating surfaces are clean, free of debris, rust, or old gasket material.
- การจัดตำแหน่ง: Carefully align the components to be fastened, ensuring the bolt holes are perfectly matched.
- การแทรก: Insert the flange bolt through the aligned holes. Do not force the bolt. If resistance is met, re-check alignment and thread condition.
- การขันให้แน่น: Tighten the bolt to the manufacturer's specified torque value using a calibrated torque wrench. Over-tightening can strip threads or damage components; under-tightening can lead to loosening and failure.
- ลำดับ: If multiple bolts are used in an assembly, follow the recommended tightening sequence (e.g., crisscross pattern) to ensure even clampกำลังไอเอ็นจี
คำเตือน: Incorrect installation can lead to component failure, property damage, or personal injury. If you are unsure about the installation process, seek assistance from a qualified technician.
ฟังก์ชั่นและการทำงาน
The Honda 90004-GHB-720 Flange Bolt serves to securely fasten two or more components together. Its integrated flange acts as a washer, distributing the load over a larger area and providing a more secure grip without the need for a separate washer. Once properly installed and torqued, the bolt maintains a clamping force that resists vibration and operational stresses, ensuring the integrity of the assembly.
การบำรุงรักษาและการตรวจสอบ
While flange bolts are designed for durability, periodic inspection is recommended, especially in high-stress or vibration-prone applications.
- การตรวจสอบภาพ: Regularly check for signs of corrosion, deformation, or damage to the bolt head, threads, and flange.
- การตรวจสอบแรงบิด: Periodically verify that the bolt remains tightened to the specified torque. Re-torque if necessary, following the manufacturer's guidelines.
- การทดแทน: If any damage is observed, or if the bolt has been subjected to extreme stress (e.g., after an impact), it is recommended to replace the bolt with a new, genuine Honda part to ensure continued safety and performance. Bolts are generally considered single-use items in critical applications.
การแก้ไขปัญหาทั่วไป
Most issues related to flange bolts stem from improper installation or material fatigue.
| ปัญหา | สาเหตุที่เป็นไปได้ | ปณิธาน |
|---|---|---|
| Bolt Loosening | Insufficient torque, vibration, improper thread engagement. | Re-torque to specification. Consider using thread-locking compound if recommended by the manufacturer. Inspect for damaged threads. |
| Stripped Threads | Over-tightening, cross-threading during installation, damaged mating threads. | Replace the bolt and inspect the mating component's threads. If mating threads are damaged, repair or replace the component. |
| Bolt Shearing/Breaking | Excessive load, material fatigue, incorrect bolt for application, over-tightening. | Replace the bolt. Verify the correct bolt type and grade for the application. Ensure proper torque. Investigate the cause of excessive load. |
ข้อมูลจำเพาะ
Key specifications for the Honda 90004-GHB-720 Flange Bolt are provided below:
- หมายเลขชิ้นส่วน: 90004-GHB-720
- ยี่ห้อ: ฮอนด้า
- ประเภทตัวยึด: กลอนหน้าแปลน
- ขนาด : 6x45 (This typically refers to a 6mm diameter and 45mm length, though specific thread pitch is not provided here. Refer to official Honda service manuals for full dimensions.)
- ผู้ผลิต: ฮอนด้า
- ต้นทาง: Made in Japan (as indicated on packaging)
การรับประกันและการสนับสนุน
Warranty information for genuine Honda parts is typically provided at the point of purchase or through official Honda dealerships. This manual does not contain specific warranty details. For warranty claims, technical support, or further assistance, please contact your authorized Honda dealer or visit the official Honda webเว็บไซต์.
บันทึก: Use of non-genuine parts or improper installation may void applicable warranties.
