สินค้าเกินview
The Jones Stephens B07113 Chrome Plated Two-Hole Touch Bath Waste Kit is designed for easy replacement and installation in standard bathtubs. This kit features a durable chrome-plated finish and a convenient toe-touch stopper for effortless operation. It includes essential components for a hassle-free setup, manufactured from corrosion-resistant materials to ensure long-lasting reliability.
รูปที่ 1: Components of the Jones Stephens B07113 Bath Waste Kit. This image displays the chrome-plated two-hole overflow faceplate with two screws, and the lower drain assembly with a chrome toe-touch stopper and black ABS piping.
การติดตั้งและการตั้งค่า
This kit is designed for straightforward installation. No special tools are required for the replacement process. Ensure all necessary components are present before beginning installation.
ส่วนประกอบที่รวมอยู่:
- Chrome-plated two-hole faceplate
- สกรูยึดแผ่นหน้า
- Drain assembly with toe-touch stopper
- บูชชิ่ง
- Pipe and elbow (as part of the drain assembly)
บันทึก: This is a standard half kit; it does not include the main overflow pipe or tee connection to the main drain line. The bolt holes on the top elbow are pre-threaded for convenience. The 3/8” thread size is for testing purposes.
ขั้นตอนการติดตั้ง:
- การตระเตรียม: Ensure the existing bath waste assembly is completely removed and the tub drain and overflow openings are clean and free of debris.
- Install Overflow Faceplate: Position the two-hole faceplate over the overflow opening. Align the screw holes and secure it with the provided screws. Ensure a watertight seal, using plumber's putty or silicone sealant as recommended by local plumbing codes.
- ประกอบท่อระบายน้ำ: Connect the drain assembly, including the bushing, pipe, and elbow, to the tub drain opening.
- Secure Drain: Tighten the drain assembly securely to create a watertight seal. Do not overtighten.
- การทดสอบการรั่วไหล: Fill the bathtub with water and check for any leaks around the overflow faceplate and the drain assembly. Address any leaks before proceeding.
คำแนะนำการใช้งาน
The Jones Stephens B07113 features a toe-touch stopper for easy operation of the tub drain.
- วิธีปิดท่อระบายน้ำ: Gently press down on the top of the chrome stopper with your foot or hand until it clicks into the closed position. This will seal the drain, allowing the tub to fill with water.
- วิธีเปิดท่อระบายน้ำ: Gently press down on the top of the chrome stopper again until it clicks into the open position. This will release the seal, allowing water to drain from the tub.
The toe-touch mechanism is designed for smooth and reliable operation without the need for bending or reaching into the tub.
การซ่อมบำรุง
Regular maintenance will ensure the longevity and proper function of your bath waste kit.
- การทำความสะอาด: Clean the chrome-plated surfaces regularly with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive scrubbers, as these can damage the finish.
- Stopper Inspection: Periodically check the toe-touch stopper for any debris or hair accumulation that might impede its sealing function. The stopper can typically be unscrewed for cleaning if necessary.
- ความสมบูรณ์ของซีล: Inspect the seals around the overflow faceplate and drain assembly annually for any signs of wear or degradation. Replace seals if necessary to prevent leaks.
การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Water Leaks Around Drain or Overflow | Improperly sealed connections; loose fittings; damaged gasket/seal. | Ensure all connections are tight. Apply plumber's putty or silicone sealant as needed. Inspect and replace any damaged gaskets or seals. |
| Drain Stopper Not Sealing Properly | Debris under stopper; stopper mechanism malfunction; worn seal on stopper. | Remove stopper and clean any debris. Check if the stopper mechanism is operating freely. Replace the stopper if the seal is worn or the mechanism is faulty. |
| การระบายน้ำช้า | Hair or debris accumulation in the drain pipe. | Remove the stopper and clear any obstructions from the drain opening. Use a drain snake if the blockage is further down the pipe. |
ข้อมูลจำเพาะ
- หมายเลขรุ่น: B07113
- เสร็จ: ชุบโครเมียม
- Faceplate Type: Two-Hole
- Stopper Type: นิ้วเท้าสัมผัส
- วัสดุ: ABS (อะคริโลไนไตรล์ บิวทาไดอีน สไตรีน)
- น้ำหนักสินค้า: 1.3 ปอนด์ (ประมาณ)
- ขนาดสินค้า : 3.71 x 3.37 x 3.24 นิ้ว (โดยประมาณ)
- ผู้ผลิต: Jones Stephens
ข้อมูลการรับประกัน
Jones Stephens products are manufactured to high-quality standards. For specific warranty details regarding the B07113 Bath Waste Kit, please refer to the official Jones Stephens warranty policy available on their webหรือติดต่อฝ่ายสนับสนุนลูกค้าโดยตรง โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ในการเคลมประกัน
การสนับสนุนลูกค้า
For technical assistance, replacement parts, or any questions regarding your Jones Stephens B07113 Bath Waste Kit, please contact Jones Stephens customer support.
- Webเว็บไซต์: www.jonessstephens.com
- โทรศัพท์: Refer to the Jones Stephens webเว็บไซต์สำหรับเบอร์ติดต่อปัจจุบัน