1. บทนำ
This manual provides essential information for the proper installation, operation, and maintenance of your BMW Engine Oil Level Sensor, Model 07910. This component is crucial for monitoring your vehicle's engine oil level, ensuring optimal engine performance and longevity. Please read this manual thoroughly before proceeding with installation or service.
2. ข้อมูลด้านความปลอดภัย
Working on automotive systems can be hazardous. Always observe the following safety precautions:
- Ensure the vehicle is parked on a level surface and the engine is off and cooled down.
- ถอดแบตเตอรี่รถยนต์ออกก่อนเริ่มงานไฟฟ้าใดๆ
- สวมอุปกรณ์ป้องกันส่วนบุคคลที่เหมาะสม รวมถึงแว่นตานิรภัยและถุงมือ
- โปรดดูคู่มือการซ่อมบำรุงเฉพาะรุ่นรถของคุณสำหรับขั้นตอนโดยละเอียดและข้อกำหนดแรงบิด
- Engine oil can be hot and cause burns. Allow the engine to cool completely before draining oil.
- Dispose of used engine oil and parts responsibly according to local regulations.
3. เนื้อหาบรรจุภัณฑ์
ตรวจสอบว่าแพ็คเกจของคุณมีรายการต่อไปนี้:
- 1 x BMW Engine Oil Level Sensor Unit (Model 07910)
- ปะเก็นซีล 1 ชิ้น
Figure 3.1: BMW Engine Oil Level Sensor 07910 with its original packaging, showing the sensor unit and the part number '12 61 7 607 910' on the box.
4. การติดตั้ง
Installation of the engine oil level sensor typically involves working with the engine oil system. Professional installation is recommended.
4.1. การตรวจสอบความเข้ากันได้
It is critical to verify the correct fitment for your specific BMW model and year. Please provide the complete Vehicle Identification Number (VIN) to an authorized BMW service center or parts specialist to confirm compatibility before installation. This sensor is compatible with various BMW models from 2002-2011, including specific 1, 3, 5, 6, 7 Series, Z4, M models, and X5/X6 variants. Refer to the product specifications for a detailed list of compatible vehicles.
4.2. ขั้นตอนการติดตั้ง (คู่มือทั่วไป)
- เตรียมยานพาหนะ: Park the vehicle on a level surface, engage the parking brake, and ensure the engine is cool. Disconnect the negative terminal of the battery.
- ถ่ายน้ำมันเครื่อง: Place a suitable drain pan under the oil pan. Remove the oil drain plug and allow the engine oil to drain completely.
- Locate and Remove Old Sensor: The oil level sensor is typically located on the bottom or side of the engine oil pan. Disconnect the electrical connector from the old sensor. Carefully unbolt and remove the old sensor, ensuring no debris falls into the oil pan.
- ติดตั้งเซ็นเซอร์ใหม่: Clean the mounting surface on the oil pan. Install the new sealing gasket onto the new BMW Engine Oil Level Sensor 07910. Insert the new sensor into the oil pan opening and secure it with the bolts. Tighten the bolts to the manufacturer's specified torque.
- เชื่อมต่อขั้วต่อไฟฟ้าใหม่: Firmly attach the electrical connector to the new sensor.
- เติมน้ำมันเครื่อง: Reinstall the oil drain plug with a new washer and tighten to specification. Refill the engine with the correct type and amount of engine oil as specified in your vehicle's owner's manual.
- การตรวจสอบขั้นสุดท้าย: Reconnect the battery. Start the engine and check for any oil leaks around the sensor. Allow the engine to run for a few minutes, then shut it off and recheck the oil level using the vehicle's dipstick (if equipped) and the electronic oil level measurement system.
5. การดำเนินการ
The BMW Engine Oil Level Sensor 07910 continuously monitors the engine oil level. This digital sensor transmits data to the vehicle's engine control unit (ECU), which then displays the oil level information on the instrument cluster or iDrive system. It helps alert the driver to low oil conditions, preventing potential engine damage.
6. การบำรุงรักษา
The oil level sensor itself is a sealed unit and does not require routine maintenance. However, regular engine oil changes and checks are essential for the sensor's accurate operation and overall engine health. Always use BMW-approved engine oil and filters.
7 การแก้ไขปัญหา
If you experience issues related to engine oil level readings, consider the following:
- "Inactive" Oil Level Message: This often indicates a fault with the oil level sensor or its wiring. Verify the electrical connection to the sensor. If the message persists after checking connections and ensuring the sensor is correctly installed, the sensor may be faulty and require replacement.
- Incorrect Oil Level Readings: Ensure the vehicle is on a level surface when checking the oil level. Allow sufficient time for the oil to settle after the engine has been running. If readings remain inaccurate, consult a qualified technician.
- การรั่วไหลของน้ำมัน: Inspect the area around the sensor for any signs of oil leaks. A damaged or improperly installed seal can cause leaks.
For persistent issues, professional diagnostic services are recommended.
8. ข้อมูลจำเพาะ
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| ยี่ห้อ | บีเอ็มดับเบิลยู |
| หมายเลขรุ่น | 07910 |
| หมายเลขชิ้นส่วนของผู้ผลิต | 12617607910, 12617567723, 12617540351, 12617506689 |
| ยูพีซี | 852671965962 |
| ความแม่นยำในการวัด | ±1.5% |
| ประเภทการติดตั้ง | การติดตั้งหน้าแปลน |
| ประเภทเอาท์พุต | ดิจิตอล |
| ระยะการรับรู้ | 25 เซนติเมตร |
| คะแนนอุณหภูมิบน | 482 องศาฟาเรนไฮต์ |
| สไตล์ | ทันสมัย |
9. การรับประกันและการสนับสนุน
As a genuine BMW part, this oil level sensor is covered by BMW's standard warranty for original equipment parts. For specific warranty details, please refer to your purchase documentation or contact an authorized BMW dealership or service center. For technical support or assistance with installation, it is recommended to consult a certified BMW technician or an automotive professional.
