Versa G088-Black

คู่มือการใช้งานเครื่องไขลานนาฬิกา Versa Quad

Model: G088-Black

การแนะนำ

This manual provides comprehensive instructions for the Versa Quad Watch Winder, model G088-Black. Designed to keep your automatic timepieces accurately wound and ready for wear, this winder features advanced settings for optimal watch care. It is suitable for all kinds of automatic watches, ensuring they remain wound and precise.

Versa Quad Watch Winder in black, front view

ภาพ: ด้านหน้า view of the Versa Quad Watch Winder, showcasing its sleek black design and four individual winding modules.

คุณสมบัติหลัก

  • Longer lasting direct-drive motor specifically designed for watch winders. Watch winder motor has 3 settings for clockwise, counter clockwise, and bi-directional. 4 settings for Turns Per Day (650-850-1050-1250). The watch winder will turn for approximately 5 minutes, then rests varies depending on setting. This cycle will repeat while the watch winder is on. The watch winder is programmed not to turn continuously which will overwind your watch.
  • Independently control the settings for each winder. One watch per winder compared to other watch winders that hold two watches per winder which can risk damage to the watches when turning.
  • Spring action pillow to support various watch sizes with additional adapter to fit larger size watches.
  • Plenty of interior space for large and oversize watches.
  • Power adapter included (110-240V). 1 yr warranty. Please contact us if you need assistance with your watch winder.
Close-up of Versa Quad Watch Winder showing control panel, adjustable pillow, and spacious compartments

ภาพ: รายละเอียด view highlighting the multiple settings on the control panel, the adjustable spring-action watch pillow, and the ample space within each winding compartment.

คู่มือการติดตั้ง

1. การเชื่อมต่อไฟฟ้า

Connect the provided power adapter (110-240V) to the DC input port on the back of the winder and then plug it into a suitable electrical outlet. Ensure the connection is secure.

2. Placing Your Watch

Gently place your automatic watch onto the adjustable watch pillow. Ensure the watch is securely fitted around the pillow. The spring-action pillow accommodates various watch sizes, with an additional adapter provided to fit larger watches comfortably.

Versa Quad Watch Winder with four watches placed inside

Image: The watch winder with four automatic watches securely placed in their individual winding modules, ready for operation.

Diagram showing adjustable watch pillow with and without adapter

Image: A diagram illustrating how the adjustable watch pillow can be used with or without an additional adapter to fit different wristband sizes, from 6 to 8 inches.

คำแนะนำการใช้งาน

Turns Per Day (TPD) Settings

The Versa Quad Watch Winder offers four Turns Per Day (TPD) settings to accommodate various automatic watch movements. Select the appropriate TPD for your watch's specific requirements. The winder operates in cycles, turning for approximately 5 minutes and then resting, to prevent overwinding and ensure optimal winding efficiency.

TPD Settingคำอธิบาย
650Minimum recommended turns for watches requiring less winding.
850Standard turns for many common automatic movements.
1050Higher turns for watches with more complex movements or lower power reserves.
1250Maximum turns for watches with high winding demands.

การตั้งค่าทิศทาง

Choose from three directional settings based on your watch's winding requirements. Consult your watch manufacturer's specifications for the recommended winding direction.

ทิศทางคำอธิบาย
ตามเข็มนาฬิกา (CW)Winds the watch in a clockwise rotation.
ทวนเข็มนาฬิกา (CCW)Winds the watch in a counter-clockwise rotation.
สองทิศทางWinds the watch in both clockwise and counter-clockwise rotations.

การควบคุมอิสระ

Each of the four winder modules can be controlled independently. This allows you to customize the TPD and directional settings for different watches simultaneously, ensuring each timepiece receives its optimal winding.

การซ่อมบำรุง

To maintain your Versa Quad Watch Winder, regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure the winder is unplugged before cleaning. Keep the winder in a clean, dust-free environment to prevent debris from affecting its operation.

การแก้ไขปัญหา

Watch Not Winding

If a watch is not winding, verify the power connection and ensure the winder is turned on. Check that the watch is securely seated on the pillow and that the correct TPD and directional settings are selected for your watch model. Some watches may require specific TPD or directional settings; consult your watch's manual.

เสียงผิดปกติ

A slight hum from the motor is normal during operation. If unusual or excessive noise occurs, ensure the winder is on a stable, flat surface and that no objects are obstructing the rotating mechanism. If the issue persists, contact customer support.

Watch Damage Prevention

This winder is designed with individual modules to prevent watches from hitting each other during operation. To avoid potential damage, always place only one watch per winder module.

Warning image showing two watches on a single winder, indicating potential damage

Image: A visual warning demonstrating the risk of damage when two watches are placed on a single winding motor, emphasizing the importance of using one watch per module.

ข้อมูลจำเพาะผลิตภัณฑ์

คุณสมบัติรายละเอียด
ขนาดสินค้า7 x 9.5 x 10 นิ้ว
น้ำหนักสินค้า6.24 ปอนด์
หมายเลขรุ่นสินค้าG088-Black
ผู้ผลิตเวอร์ซ่า
กำลังไฟเข้า110-240V (Power adapter included)
Winding Capacity4 automatic watches (independent control)
TPD Settings650, 850, 1050, 1250
การตั้งค่าทิศทางตามเข็มนาฬิกา ทวนเข็มนาฬิกา สองทิศทาง

การรับประกันและการสนับสนุน

The Versa Quad Watch Winder comes with a รับประกัน 1 ปี from the date of purchase. This warranty covers manufacturing defects and ensures proper functioning under normal use. Please retain your proof of purchase for warranty claims.

For assistance, technical support, or warranty inquiries, please contact Versa customer support through the retailer where the product was purchased or visit the official Versa webเว็บไซต์สำหรับข้อมูลการติดต่อ

แผนการคุ้มครองแบบขยาย

Extended protection plans are available for purchase to provide additional coverage beyond the standard manufacturer's warranty. These plans offer peace of mind and can cover repairs or replacements for a longer duration.

  • แผนคุ้มครอง 2 ปี: วางจำหน่ายในราคา 18.99 ดอลลาร์
  • แผนคุ้มครอง 3 ปี: วางจำหน่ายในราคา 25.99 ดอลลาร์
  • การปกป้องที่สมบูรณ์: Monthly plan for $16.99, covering all eligible past and future purchases.

เอกสารที่เกี่ยวข้อง - G088-Black

พรีview คู่มือการใช้งาน Versa Watch Winder G016
คู่มือการใช้งานเครื่องไขลานนาฬิกา Versa G016 พร้อมรายละเอียดคุณลักษณะ การใช้งาน และเคล็ดลับสำหรับการใช้งานอย่างเหมาะสมที่สุดกับนาฬิกาหลากหลายยี่ห้อ
พรีview เครื่องหมุนนาฬิกา Versa G088: คู่มือการใช้งานและคำแนะนำการใช้งาน
คู่มือการใช้งานเครื่องไขลานนาฬิกา Versa G088 ฉบับสมบูรณ์ ครอบคลุมรายละเอียดเฉพาะ การใช้งาน คุณสมบัติ และเคล็ดลับสำหรับการไขลานนาฬิกาอย่างมีประสิทธิภาพสูงสุด พร้อมการตั้งค่าความเข้ากันได้ของแบรนด์
พรีview คู่มือการใช้งานเครื่องไขลานนาฬิกา Versa G078
คู่มือการใช้งานเครื่องไขลานนาฬิกา Versa G078 โดยละเอียดเกี่ยวกับข้อมูลจำเพาะ คุณสมบัติ การใช้งาน และเคล็ดลับในการตั้งค่า TPD และทิศทางการหมุนสำหรับนาฬิกายี่ห้อต่างๆ
พรีview คู่มือการใช้งานเครื่องไขลานนาฬิกา Versa G084
คู่มือการใช้งานฉบับสมบูรณ์สำหรับเครื่องไขลานนาฬิกา Versa G084 โดยละเอียด ครอบคลุมถึงข้อมูลจำเพาะ คุณสมบัติ การใช้งาน และเคล็ดลับการแก้ไขปัญหาสำหรับการไขลานนาฬิกาอัตโนมัติ
พรีview เซ็นเซอร์ตรวจจับความเคลื่อนไหว Versa VW-DP: การใช้งาน การติดตั้ง และข้อมูลจำเพาะ
คู่มือฉบับสมบูรณ์สำหรับเซ็นเซอร์ตรวจจับความเคลื่อนไหว Versa VW-DP ครอบคลุมคุณสมบัติ วิธีการติดตั้ง การตั้งโปรแกรมการใช้งาน ขั้นตอนการทดสอบการเดิน และข้อกำหนดทางเทคนิค รวมถึงรายละเอียดเกี่ยวกับการป้องกันการตรวจจับสัตว์เลี้ยงและการปฏิบัติตามข้อกำหนดของ FCC
พรีview คำแถลงการปฏิบัติตามมาตรฐานเต้ารับหรี่ไฟแบบเสียบปลั๊ก Z-Wave
เอกสารฉบับนี้ให้รายละเอียดเกี่ยวกับข้อกำหนดการปฏิบัติตามโปรโตคอล Z-Wave สำหรับปลั๊กไฟหรี่ไฟ Versa รวมถึงคุณสมบัติของผลิตภัณฑ์ ข้อมูลทางเทคนิค และคลาสคำสั่งที่รองรับ