Bogen BG-NR100

BOGEN BG-NR100 Night Ringer Instruction Manual

Model: BG-NR100 | Brand: Bogen

1. บทนำ

1.1 ผลิตภัณฑ์เกินview

Bogen BG-NR100 Night Ringer device with connection terminals
The Bogen BG-NR100 Night Ringer is a compact device designed to provide an audible ring signal for paging systems. It responds to standard 90V telephone ring signals or external contact closures, producing a distinct dual-frequency electronic ringer tone. This unit is ideal for environments where telephone ring signals need to be amplified or integrated into a public address system, automatically muting background music during a ring event.

The Bogen BG-NR100 Night Ringer is an essential component for integrating telephone ringing into a paging or public address system. It is engineered to detect incoming telephone ring signals or external contact closures and generate a loud, clear electronic ringer tone. Its compact design and low current draw make it an efficient and reliable solution for various commercial and industrial applications.

1.2 คุณสมบัติหลัก

2. ข้อมูลด้านความปลอดภัย

Please read all safety instructions carefully before installing or operating the Bogen BG-NR100 Night Ringer. Failure to follow these instructions may result in electric shock, fire, or other hazards.

2.1 ข้อควรระวังเพื่อความปลอดภัยทั่วไป

2.2 ความปลอดภัยทางไฟฟ้า

3. การตั้งค่า

3.1 การแกะกล่อง

Carefully remove the Night Ringer from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. If damage is found, contact your supplier immediately.

3.2 การติดตั้ง

The BG-NR100 is designed for surface mounting. Use appropriate screws (not supplied) to secure the unit to a wall or other stable surface using the mounting tabs on either side of the enclosure. Ensure the mounting location allows for adequate ventilation and access to connections.

3.3 การเชื่อมต่อสายไฟ

All connections are made via the screw terminal block located on the front of the unit. Ensure power is disconnected before making any wiring connections.

ป้ายเทอร์มินัลคำอธิบายการทำงาน
TEL RING (T, R)Telephone Ring InputConnect to the tip (T) and ring (R) lines of a standard 90V telephone ring signal source.
CONTACT RING (A, B)External Contact Closure InputConnect to a dry contact closure (e.g., from a relay or switch) to trigger the ringer.
POWER SUPPLY (+24, -24)กำลังไฟเข้าConnect to a regulated 24V DC power supply. Observe polarity (+24V to +24, -24V to -24).
BGM SOURCE (A, B)อินพุตเพลงพื้นหลังConnect the background music source here. The unit will mute this input during a ring event.
AMP INPUT (A, B)Amplifier Input / Output to Paging SystemConnect this output to the input of your paging amplifier or public address system. This carries the ringer tone and the muted BGM.

4. ปฏิบัติการ

4.1 การทำงานพื้นฐาน

Once properly connected and powered, the BG-NR100 will automatically detect an incoming 90V telephone ring signal or a closure on the Contact Ring terminals. Upon detection, the unit will generate a dual-frequency electronic ringer tone and simultaneously mute any background music connected to the BGM Source input. The ringer tone will be sent to the Amp Input terminals for connection to your paging system.

4.2 การควบคุมระดับเสียง

The ringer volume can be adjusted using the TONE VOL knob located on the top left of the unit. Rotate the knob clockwise to increase the volume and counter-clockwise to decrease it. Adjust the volume to a suitable level for your environment.

5. การบำรุงรักษา

5.1 การทำความสะอาด

To clean the unit, wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners. Ensure the unit is powered off and disconnected from all sources before cleaning.

5.2 การดูแลทั่วไป

The BG-NR100 is designed for reliable operation and requires minimal maintenance. Ensure it is installed in a location free from excessive dust, moisture, and extreme temperatures. Periodically check all wiring connections to ensure they are secure.

6 การแก้ไขปัญหา

If you experience issues with your Bogen BG-NR100 Night Ringer, refer to the following table for common problems and solutions.

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
No ringer tone output.ไม่มีไฟเข้าตัวเครื่องCheck power supply connections and ensure 24V DC is present.
Incorrect or no input signal (TEL RING or CONTACT RING).Verify 90V ring signal on TEL RING or proper contact closure on CONTACT RING.
ตั้งปุ่มปรับระดับเสียงไว้ต่ำเกินไปAdjust the TONE VOL knob clockwise.
Ringer tone is distorted or weak.Improper connection to paging ampชีวิต.ทำให้มั่นใจ AMP INPUT is correctly connected to the amplifier input. Check ampการตั้งค่าตัวปรับระดับเสียง
Background music does not mute.BGM SOURCE not connected correctly.Verify BGM SOURCE connections. Ensure the music source is routed through the Night Ringer.

If the problem persists after attempting these solutions, please contact Bogen technical support or a qualified service technician.

7. ข้อมูลจำเพาะ

Technical specifications for the Bogen BG-NR100 Night Ringer:

คุณลักษณะค่า
ผู้ผลิตโบเก้น
ยี่ห้อโบเก้น
หมายเลขรุ่นBG-NR100
น้ำหนักสินค้า1 ปอนด์
ขนาดสินค้า1 x 5 x 3 นิ้ว
FCC Registration NumberCD23CH-17566-KX-N
ความเท่าเทียมกันของ Ringer1.1 ข
วันที่พร้อมใช้งานครั้งแรก27 พฤศจิกายน 2013

8. การรับประกันและการสนับสนุน

8.1 ข้อมูลการรับประกัน

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bogen website. Bogen Communications, Inc. typically provides a limited warranty against defects in materials and workmanship for a specified period from the date of purchase.

8.2 การสนับสนุนด้านเทคนิค

If you require technical assistance or have questions regarding the installation or operation of your BG-NR100 Night Ringer, please contact Bogen technical support. Contact information can usually be found on the Bogen webเว็บไซต์หรือในบรรจุภัณฑ์ของผลิตภัณฑ์

เอกสารที่เกี่ยวข้อง - BG-NR100

พรีview คู่มือการกำหนดค่าตัวควบคุมอินพุต/เอาต์พุต Nyquist รุ่น Bogen NQ-E7010
คู่มือนี้ให้คำแนะนำอย่างละเอียดสำหรับการกำหนดค่าตัวควบคุมอินพุต/เอาต์พุต Nyquist รุ่น Bogen NQ-E7010 เรียนรู้วิธีจัดการการตั้งค่าเครือข่าย อัปเดตเฟิร์มแวร์ เข้าถึงบันทึก และตรวจสอบให้แน่ใจว่าได้เข้าถึงอย่างปลอดภัยด้วยหน่วยงานรับรองดิจิทัลของ Bogen
พรีview แผงควบคุมหลัก Bogen MCP35A: คู่มือการติดตั้งและใช้งาน
คู่มือนี้ให้รายละเอียดการติดตั้ง การใช้งาน และข้อมูลจำเพาะทางเทคนิคสำหรับแผงควบคุมหลัก Bogen MCP35A ซึ่งเป็นระบบอเนกประสงค์สำหรับการสื่อสารสองทางและการกระจายโปรแกรมในสภาพแวดล้อมต่างๆ
พรีview โบเกน ACD2X2 Ampคู่มือการติดตั้งลำโพงเพดานแบบ Drop-In และการรับประกัน
คำแนะนำในการติดตั้ง รายละเอียดการเชื่อมต่อ และข้อมูลการรับประกันสำหรับ Bogen ACD2X2 ampลำโพงติดเพดานแบบฝัง ครอบคลุมการเชื่อมต่อไฟฟ้า การติดตั้งบนเพดานสำหรับกระเบื้องขนาด 2x2 และ 2x4 และข้อมูลจำเพาะของผลิตภัณฑ์
พรีview คู่มือการตั้งค่าโมดูลอินเตอร์คอม VoIP Bogen Nyquist (NQ-GA10P, NQ-GA10PV)
คู่มือการตั้งค่าโดยละเอียดสำหรับโมดูลอินเตอร์คอม VoIP รุ่น Nyquist NQ-GA10P และ NQ-GA10PV ของ Bogen ครอบคลุมการติดตั้ง การตั้งค่าเครือข่าย การอัปเดตเฟิร์มแวร์ และการใช้งานแบบสแตนด์อโลนสำหรับระบบเพจจิ้ง IP และระบบกระจายเสียง
พรีview โบเกน AS1, ASUG1(DK), ASWG1(DK) Ampคู่มือการติดตั้งและใช้งานลำโพงเพดานแบบ Lified
คู่มือการติดตั้งและใช้งานสำหรับ AS1, ASUG1(DK) และ ASWG1(DK) ของ Bogenampลำโพงติดเพดานทรงกรวยขนาด 8 นิ้ว ครอบคลุมคำอธิบายผลิตภัณฑ์ คำแนะนำในการติดตั้งสำหรับตู้ลำโพง TB8 และ RE84 การเชื่อมต่อทางไฟฟ้า การปรับแต่ง และข้อมูลการรับประกันแบบจำกัด
พรีview Bogen NQ-GA20P2 Nyquist Integrated Power Ampคู่มือการกำหนดค่าเครื่องขยายเสียง
คู่มือการตั้งค่าสำหรับเครื่องจ่ายไฟแบบรวม Bogen NQ-GA20P2 Nyquist ขนาด 20 วัตต์ ampเครื่องขยายเสียง ครอบคลุมการตั้งค่า การตั้งค่าเครือข่าย การอัปเดตเฟิร์มแวร์ และการปรับพารามิเตอร์ DSP