คู่มือการใช้งานขาตั้งกล้อง GoPro แบบติดด้วยตัวดูด (AUCMT-302)

1. บทนำ

The GoPro Suction Cup Mount is designed for securely attaching your GoPro camera to vehicles, boats, motorcycles, and other smooth, non-porous surfaces. Engineered for stability and a broad range of motion, this industrial-strength mount has been proven at speeds exceeding 150 mph. It includes a short extension arm for ultra-compact mounting and features both a standard base and a quick release base for convenient transitions between shots and locations.

Important Safety Note: This mount is not recommended for surfing, snowboarding, or other high-impact sports. It is intended for non-impact activities only.

2. อะไรอยู่ในกล่อง

• ถ้วยดูด
• แขนปรับได้
• ฐานมาตรฐาน
• ฐานปลดเร็ว
• กระเป๋าเชือกรูด

3. การตั้งค่าและการติดตั้ง

3.1 การเตรียมพื้นผิว

For optimal adhesion and security, ensure the mounting surface is clean, smooth, and dry. Thoroughly clean the area with water and wipe away any dirt, dust, or grease. Leaving the surface slightly damp can sometimes aid in creating a stronger suction seal.

3.2 Attaching the Suction Cup

1. Place the suction cup firmly against the prepared surface.
2. Press down on the center of the suction cup while simultaneously pushing the lever down to create a vacuum seal. Ensure the lever is fully engaged.
3. Verify the suction cup is securely attached by gently pulling on it. It should not move or slide.

3.3 Attaching Your GoPro Camera

The mount includes both a standard base and a quick release base. Choose the appropriate base for your needs.

• ฐานมาตรฐาน: Align your GoPro camera's mounting fingers with the slots on the standard base. Insert the thumb screw through the fingers and the base, then tighten securely.
• ฐานเผยแพร่ด่วน: Slide your GoPro camera's mounting fingers into the quick release buckle until it clicks into place. To remove, press the release tabs on the side of the buckle and slide the camera out.

3.4 การปรับมุมกล้อง

The adjustable arms and ball joint mechanism allow for a broad range of motion and precise camera positioning. Loosen the thumb screws on the adjustable arms to change the angle, then tighten them firmly to lock the position.

Image: GoPro camera attached to the suction cup mount, illustrating the adjustable arm and ball joint for flexible positioning.

3.5 Safety Recommendation

Always use a camera tether when mounting your GoPro to a moving vehicle or during any activity where the camera could potentially detach. This provides an extra layer of security for your equipment.

4. การใช้งานขาตั้งกล้อง

The quick release base facilitates rapid changes in camera position or location. Simply press the release tabs on the side of the buckle to detach the camera, and then re-attach it to another compatible mount or re-position it as needed. This allows for efficient capture of diverse perspectives without extensive re-setup.

5. การบำรุงรักษา

• การทำความสะอาด: Regularly clean the suction cup and mounting surface to ensure optimal adhesion. Use water and a soft cloth to remove any residue.
• พื้นที่จัดเก็บ: Store the suction cup mount in a clean, dry place away from direct sunlight when not in use. Avoid storing it with the suction cup pressed against a surface for extended periods, as this can deform the rubber.

6 การแก้ไขปัญหา

6.1 การสูญเสียการดูด

If the suction cup is not holding securely or loses suction:

• Ensure both the suction cup and the mounting surface are perfectly clean and free of any debris, dust, or oils.
• Apply the suction cup to a smooth, non-porous surface. Textured or porous surfaces will prevent a proper seal.
• Firmly press the center of the suction cup while engaging the lever. Sometimes, a slight dampness on the suction cup can improve the seal.
• Check for any damage or deformities on the rubber suction cup. A damaged cup may not be able to form a reliable seal.

7. ข้อมูลจำเพาะ

Image: Compatibility of the GoPro Suction Cup Mount with various GoPro camera models.

8. การรับประกันและการสนับสนุน

8.1 ข้อสงวนสิทธิ์ทางกฎหมาย

NO EXPRESSED WARRANTY. NO REFUND/RETURN IF RETAIL PACKAGING OPENED.

8.2 การสนับสนุนลูกค้า

For further assistance or inquiries, please visit the official GoPro support webเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าของพวกเขา

9. Product in Action