การแนะนำ
The Galcon 7001D is a robust and user-friendly battery-operated irrigation controller designed for automated operation of drip and sprinkler systems. This model, GAR2S1312P0, comes integrated with a 3/4-inch inline valve, providing a complete solution for your watering needs without requiring external power or complex wiring. It is built to withstand various landscape environments and offers flexible programming options for efficient water management.
Key features include easy programming via six large buttons, manual operation, and a rain delay function. Its weather and UV resistant construction ensures durability for outdoor use. This product is specifically designed for use in the USA and Canada.
Figure 1: The Galcon 7001D controller unit attached to its 3/4-inch valve, with the protective cover open, revealing the control panel and display.
การติดตั้งและการตั้งค่า
The Galcon 7001D is designed for straightforward installation above ground. Follow these steps to set up your controller:
- การติดตั้งแบตเตอรี่: The controller operates on a single 9V alkaline battery. Open the battery compartment, insert a fresh 9V battery, ensuring correct polarity, and securely close the compartment.
- การเชื่อมต่อวาล์ว: The unit includes a 3/4-inch inline valve. Connect the valve to your water source (e.g., outdoor faucet) and then connect your irrigation line (drip or sprinkler system) to the outlet of the valve. Ensure all connections are tight to prevent leaks.
- การติดตั้ง: Position the controller and valve unit in a location that is easily accessible for programming and maintenance, and where it is protected from direct impact or excessive moisture. Ensure the unit is installed above grade.
คำแนะนำการใช้งาน
The Galcon 7001D features an intuitive control panel with six large buttons for easy programming and operation.
แผงควบคุมโอเวอร์view:
- ปุ่มโหมด: Used to cycle through programming modes (Time, Duration, Days, Starts, Cycle).
- ปุ่ม ตลท.: ยืนยันการเลือกและบันทึกการตั้งค่า
- ปุ่ม +/-: Adjust values (e.g., time, duration, days).
- ปุ่มแมนนวล: เริ่มการรดน้ำด้วยตนเอง
- Rain Off Button: Activates or deactivates the rain delay function.
Programming Your Controller:
The controller supports both weekly and cyclic programming. Use the MODE button to navigate through the settings and the +/- buttons to adjust values. Press SET to confirm each setting.
- ตั้งเวลาปัจจุบัน: Use the MODE button to reach the "Time" setting. Adjust the current time using the +/- buttons and press SET.
- ตั้งค่าระยะเวลาการรดน้ำ: Navigate to "Duration". Set how long you want the valve to open for each watering cycle (e.g., 10 minutes). Press SET.
- Select Watering Days (Weekly Program): Go to "Days". Select the specific days of the week for watering (M Tu W Th F Sa Su). Press SET.
- กำหนดเวลาเริ่มต้น: Move to "Starts". Program up to four daily start times for watering. Press SET after each time.
- Set Cycle (Cyclic Program): Alternatively, for cyclic programming, navigate to "Cycle". Set the interval between watering cycles (e.g., every 12 hours, every 2 days). Press SET.
การดำเนินการด้วยตนเอง:
To manually open the valve, press the คู่มือ button. The valve will open for the duration set in the "Duration" setting. To close it manually before the set duration, press the คู่มือ ปุ่มอีกครั้ง
ฟังก์ชั่นหน่วงเวลาฝน:
To temporarily suspend watering, press the Rain Off button. This will activate a rain delay. Pressing it again will deactivate the delay and resume the programmed schedule.
การซ่อมบำรุง
Proper maintenance ensures the longevity and optimal performance of your Galcon 7001D controller.
- การเปลี่ยนแบตเตอรี่: Replace the 9V alkaline battery annually, or when the low battery indicator appears on the display. Always use a fresh, high-quality alkaline battery.
- การทำความสะอาด: Periodically clean the exterior of the controller with a soft, damp ผ้า. หลีกเลี่ยงการใช้น้ำยาทำความสะอาดหรือตัวทำละลายที่มีฤทธิ์กัดกร่อน
- ฤดูหนาว: In regions with freezing temperatures, it is recommended to disconnect the controller from the water source and store it indoors during the winter months to prevent damage from freezing water. Remove the battery before storage.
- การตรวจสอบ: Regularly inspect the valve and connections for any signs of leaks or damage. Address any issues promptly to maintain system efficiency.
การแก้ไขปัญหา
If you encounter issues with your Galcon 7001D controller, refer to the following common troubleshooting tips:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Controller display is blank or dim. | แบตเตอรี่เหลือน้อยหรือหมด | เปลี่ยนแบตเตอรี่อัลคาไลน์ 9V |
| Valve does not open or close. | Incorrect programming, low battery, or debris in valve. | Verify programming settings. Replace battery. Check for obstructions in the valve. |
| น้ำรั่วจากการเชื่อมต่อ | Loose connections or damaged O-rings/gaskets. | Tighten all connections. Inspect and replace O-rings or gaskets if damaged. |
| Rain delay function is stuck. | Software glitch or persistent rain delay setting. | กดปุ่ม Rain Off button again. If issue persists, remove battery for 30 seconds and reinsert to reset. |
ข้อมูลจำเพาะ
- แบบอย่าง: GAR2S1312P0
- วาล์วขนาด: 3/4 นิ้ว
- แหล่งพลังงาน: 1 x 9V Alkaline Battery (required)
- ขนาดสินค้า : 4.4 x 3.9 x 7.4 นิ้ว
- น้ำหนักสินค้า: 1.25 ปอนด์
- ผู้ผลิต: Galcon USA, LTD
- ASIN: B00ES8NMH8
- การใช้งาน: Designed for use only in the USA and Canada
- การเขียนโปรแกรม: Weekly or Cyclic
- คุณสมบัติ: Manual operation, Rain delay, Weather and UV resistant
การรับประกันและการสนับสนุน
For detailed warranty information, please refer to the documentation included with your purchase or contact Galcon USA, LTD directly. For additional support and resources, you may refer to the official user guides:
Always ensure you are using the product as intended and within the specified environmental conditions to maintain warranty validity.
