คู่มือการใช้งานตลับลูกปืนแบบบูชบอล Thomson SUPER8-CR

สินค้าเกินview

The Thomson SUPER8-CR Super Ball Bushing Bearing is designed for linear motion applications requiring high load capacity and extended service life. This self-aligning bearing is corrosion resistant and suitable for use with 0.5 inch diameter shafts. It offers significant advantages over conventional linear bearings, including reduced friction and enhanced operational efficiency.

คุณสมบัติหลัก

• เพิ่มขีดความสามารถในการรับน้ำหนัก: Provides three times the load capacity compared to conventional linear bearings.
• Extended Travel Life: Offers up to twenty-seven times the travel life of conventional linear bearings.
• Self-Aligning Design: Industry-standard self-aligning capability simplifies installation and minimizes wear caused by minor bore misalignment.
• Low Friction Operation: Features a coefficient of friction as low as 0.001, enabling smooth and efficient movement.
• High Speed and Acceleration: Capable of achieving speeds up to 10 ft/s and accelerations up to 450 ft/s² without derating factors.
• ทนต่อการกัดกร่อน: Designed for applications where resistance to corrosion is critical.
• น้ำหนักเบาและเงียบ: Wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in high-speed applications.
• Adjustable Fit-up: Radially floating bearing plates allow for adjustment to a specific diametrical fit-up when installed in an adjustable housing, ensuring accurate and repeatable movement.

การติดตั้งและการตั้งค่า

Proper installation is crucial for the optimal performance and longevity of your Thomson SUPER8-CR Ball Bushing Bearing. This bearing is designed for end-supported applications and is self-aligning to compensate for minor misalignments.

1. ความเข้ากันได้ของเพลา: Ensure the shaft diameter is 0.5 inches for proper fit and function.
2. การเตรียมความพร้อมด้านที่อยู่อาศัย: If using an adjustable housing, prepare it according to the manufacturer's instructions. The self-aligning feature of the SUPER8-CR bearing helps ease installation and minimize wear from minor bore misalignment.
3. Bearing Insertion: Carefully insert the bearing onto the shaft. Avoid forcing the bearing, which could damage the internal components.
4. การจัดตำแหน่ง: The self-aligning nature of the bearing will accommodate small misalignments. For best results, ensure the shaft and housing are as accurately aligned as possible.
5. Adjustable Fit-up (Optional): If your application requires precise diametrical fit-up, install the bearing in an adjustable housing. The radially floating bearing plates allow for fine-tuning to achieve the desired accuracy and repeatability of movement.
6. การรักษาความปลอดภัย: Secure the bearing in its housing using appropriate methods, ensuring it is firmly seated but not over-compressed.

ภาพที่ 1: ภาพระยะใกล้ view of the Thomson SUPER8-CR Ball Bushing Bearing. The black cylindrical bearing features internal ball races and is marked with "THOMSON" and "SUPER". This image illustrates the product's physical appearance and construction.

แนวทางปฏิบัติ

The Thomson SUPER8-CR bearing is designed for high-performance linear motion. Adhering to operational guidelines will ensure its efficiency and lifespan.

• Speed and Acceleration: The bearing can operate at speeds up to 10 ft/s and accelerations up to 450 ft/s². Ensure your application's operational parameters remain within these limits.
• การจัดการโหลด: While offering three times the load capacity of conventional bearings, it is essential not to exceed the specified load ratings for your specific application to prevent premature wear.
• Low Friction Environment: The bearing's low coefficient of friction (as low as 0.001) contributes to smooth operation. Maintain a clean environment to preserve this low friction characteristic.
• สภาพแวดล้อม : As a corrosion-resistant bearing, it is suitable for environments where moisture or corrosive agents might be present. However, extreme conditions should still be avoided or mitigated where possible.

การซ่อมบำรุง

Regular maintenance helps extend the life and maintain the performance of your SUPER8-CR Ball Bushing Bearing.

• การทำความสะอาด: Periodically inspect the bearing and shaft for debris, dust, or contaminants. Clean with a suitable solvent if necessary, ensuring no residue remains.
• การหล่อลื่น: While ball bushings generally require less lubrication than plain bearings, consult your system's specific requirements. If lubrication is needed, use a compatible lubricant recommended for linear bearings.
• การตรวจสอบ: Regularly check for signs of wear, such as excessive play, unusual noise, or visible damage to the bearing or shaft.
• การปกป้องสิ่งแวดล้อม: Ensure the operating environment remains as clean and free from abrasive particles as possible to prevent premature wear.

การแก้ไขปัญหา

If you encounter issues with your Thomson SUPER8-CR Ball Bushing Bearing, consider the following common troubleshooting steps:

• เสียงรบกวนหรือการสั่นสะเทือนมากเกินไป:
  • Check for proper alignment of the shaft and housing. The self-aligning feature accommodates minor misalignments, but significant issues can still cause noise.
  • Inspect for contamination or debris within the bearing or on the shaft.
  • Verify that the bearing is securely mounted and not loose in its housing.
• Sticking or Binding:
  • Ensure the shaft is clean and free from nicks or burrs.
  • Check for proper lubrication if applicable to your system.
  • Re-evaluate the load on the bearing to ensure it is within specified limits.
• การสึกหรอก่อนกำหนด:
  • Review operating conditions for excessive loads, speeds, or accelerations.
  • Inspect the environment for abrasive contaminants that could enter the bearing.
  • Confirm proper installation and alignment.

If issues persist after troubleshooting, contact Thomson technical support for further assistance.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

For specific warranty information regarding your Thomson SUPER8-CR Ball Bushing Bearing, please refer to the documentation provided with your purchase or visit the official Thomson website. For technical support, product inquiries, or assistance with troubleshooting beyond the scope of this manual, please contact Thomson customer service directly.

คุณสามารถหาข้อมูลเพิ่มเติมและรายละเอียดการติดต่อได้ที่ THOMSON Store.