สินค้าเกินview
The Fusion MS-CLADAP Adapter Plate is designed to facilitate the installation of Fusion 600 and 700 Series marine stereos into existing cutouts previously occupied by Clarion CMD4, CMD5, CMD6, or CMD7 units. This adapter plate provides a clean and professional finish by covering the original mounting holes, ensuring a seamless upgrade for marine audio systems. It is constructed for durability in harsh marine environments.
Image of the Fusion MS-CLADAP Adaptor Plate, a black rectangular plate with a central cutout for a stereo unit and four screw holes in the corners.
คู่มือการติดตั้ง
This section outlines the steps for installing the Fusion MS-CLADAP Adaptor Plate.
ความเข้ากันได้
- Compatible with Fusion 600 Series stereos (e.g., MS-RA60, MS-AV600, MS-IP600).
- Compatible with Fusion 700 Series stereos (e.g., MS-RA70, MS-RA70NSX, MS-AV700, MS-IP700).
- Designed to fit cutouts for Clarion CMD4, CMD5, CMD6, or CMD7 units.
การตรวจสอบก่อนการติดตั้ง
- Verify the dimensions of your existing cutout and the new Fusion stereo to ensure proper fit with the adapter plate.
- Ensure all power to the existing stereo system is disconnected before beginning installation.
ขั้นตอนการติดตั้ง
- Carefully remove the existing Clarion stereo unit from its mounting location.
- Clean the mounting surface to remove any debris or old sealant.
- Position the Fusion MS-CLADAP Adaptor Plate over the existing cutout. The plate is designed to cover the original mounting holes.
- Mark the new mounting holes for the adapter plate, if necessary. Some installations may require drilling new pilot holes.
- Secure the adapter plate using appropriate marine-grade fasteners (not included). Ensure the plate is flush and stable.
- Install your Fusion 600 or 700 Series stereo into the central opening of the adapter plate according to the stereo's specific installation instructions.
- Connect all necessary wiring to the new Fusion stereo.
- Test the functionality of the new stereo system.
Note: The adapter plate's external dimensions are 9-1/8” x 3-7/8”, and the cutout dimensions are 7” x 2-1/8”.
การดำเนินการ
The Fusion MS-CLADAP Adaptor Plate is a passive component designed to facilitate the physical installation of a stereo unit. Its operation is integrated with the functionality of the installed Fusion marine stereo. Once the stereo is securely mounted using the adapter plate, refer to the specific user manual for your Fusion 600 or 700 Series stereo for detailed operating instructions.
การดูแลรักษา
To ensure the longevity and appearance of your Fusion MS-CLADAP Adaptor Plate, follow these maintenance guidelines:
- การทำความสะอาด: Regularly wipe the surface of the adapter plate with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used. Avoid abrasive cleaners or solvents, as these can damage the finish.
- การตรวจสอบ: Periodically inspect the adapter plate and its mounting screws for any signs of wear, corrosion, or loosening, especially in marine environments.
- การปกป้องสิ่งแวดล้อม: While designed for marine environments, prolonged exposure to direct sunlight or extreme weather conditions without proper protection may affect its appearance over time.
Proper maintenance helps preserve the aesthetic and structural integrity of the installation.
การแก้ไขปัญหา
This section addresses common issues that may arise during or after the installation of the MS-CLADAP Adaptor Plate.
ปัญหาทั่วไปและแนวทางแก้ไข
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Adapter plate does not fit existing cutout. | Incorrect Clarion model or non-standard cutout dimensions. | Verify the existing Clarion unit model (CMD4, CMD5, CMD6, CMD7). Measure the cutout dimensions and compare with the adapter plate's specified cutout (7” x 2-1/8”). Custom modification may be required if dimensions do not match. |
| New Fusion stereo does not fit into the adapter plate's opening. | Incorrect Fusion stereo model or manufacturing variance. | Ensure your Fusion stereo is a 600 or 700 Series model. Check the stereo's dimensions against the adapter plate's internal opening. |
| Mounting holes do not align or are too close to the edge. | Existing mounting holes are not compatible with the adapter plate's pre-drilled holes. | The adapter plate is designed to cover existing holes. New pilot holes may need to be drilled for the adapter plate itself. Use appropriate fasteners that secure into the mounting surface. |
| Plate appears loose after installation. | Screws are not tightened sufficiently or mounting surface is uneven. | Ensure all mounting screws are tightened securely. If the surface is uneven, consider using a marine-grade sealant or shims to create a flush fit. |
If issues persist, consult a professional marine electronics installer.
ข้อมูลจำเพาะผลิตภัณฑ์
| คุณสมบัติ | รายละเอียด |
|---|---|
| แบบอย่าง | MS-CLADAP |
| ยี่ห้อ | ฟิวชั่น |
| สี | สีดำ |
| External Dimensions (W x H) | 9-1/8” x 3-7/8” (approx. 23.18 cm x 9.84 cm) |
| ขนาดช่องเจาะ (กว้าง x สูง) | 7” x 2-1/8” (approx. 17.78 cm x 5.40 cm) |
| น้ำหนักสินค้า | 4 ออนซ์ (ประมาณ 113 กรัม) |
| ความเข้ากันได้ | Fusion 600 & 700 Series Stereos; Clarion CMD4, CMD5, CMD6, CMD7 cutouts |
| วัสดุ | Durable marine-grade material |
| ยูพีซี | 878816006543 |
ข้อมูลการรับประกัน
For specific warranty terms and conditions regarding the Fusion MS-CLADAP Adaptor Plate, please refer to the official Fusion product warranty documentation provided with your purchase or visit the Fusion website. Warranty coverage typically addresses manufacturing defects. Keep your proof of purchase for warranty claims.
การสนับสนุนลูกค้า
If you require further assistance with the Fusion MS-CLADAP Adaptor Plate, please contact Fusion customer support.
- แหล่งข้อมูลออนไลน์: เยี่ยมชมเว็บไซต์อย่างเป็นทางการของ Fusion webเว็บไซต์นี้รวบรวมคำถามที่พบบ่อย คู่มือผลิตภัณฑ์ และบทความให้ความช่วยเหลือ
- ข้อมูลติดต่อ: Refer to the Fusion website or your product packaging for the most current contact details, including phone numbers and email addresses for technical support.
When contacting support, please have your product model (MS-CLADAP) and any relevant purchase information ready.
