บันทึกTag TREX-8-AMZ

TREX-8 Temperature Data Recorder User Manual

Model: TREX-8-AMZ

ยี่ห้อ: LogTag

สินค้าเกินview

บันทึกTag TREX-8 is an advanced external probe temperature recorder designed for accurate and cost-effective electronic temperature monitoring. It integrates state-of-the-art technology with innovative design to provide a high-performance data logging system. This model comes equipped with an ST100S-15 External Probe, essential for precise temperature measurements. Please note that an LTI-HID Docking Station is required for operation and software download, which is available as a free download.

บันทึกTag TREX-8 Temperature Data Recorder with remote probe

Image: The LogTag TREX-8 Temperature Data Recorder unit with the ST100S-15 remote probe connected.

คุณสมบัติหลัก

เนื้อหาแพ็คเกจ

The TREX-8 Temperature Data Recorder package typically includes:

Note: The LTI-HID Docking Station is required for operation and software download, but is sold separately.

การตั้งค่า

1. การติดตั้งซอฟต์แวร์

Before using the TREX-8, download and install the LogTag Analyzer software from the official LogTag website. This software is essential for configuring the recorder, downloading data, and viewing temperature logs.

2. การเชื่อมต่อสถานีเชื่อมต่อ

Connect the LTI-HID Docking Station (sold separately) to your computer's USB port. Ensure the necessary drivers are installed, which are typically included with the LogTag ซอฟต์แวร์วิเคราะห์

บันทึกTag TREX-8 inserted into LTI-HID Docking Station

Image: The LogTag TREX-8 temperature recorder unit inserted into the LTI-HID docking station, ready for connection to a computer.

3. Connecting the Remote Probe

Carefully insert the connector of the ST100S-15 remote probe into the designated port on the TREX-8 data recorder. Ensure a secure connection.

บันทึกTag TREX-8 with remote probe connected

Image: The LogTag TREX-8 temperature recorder with the ST100S-15 remote probe securely connected to its input port.

ST100S-15 1.5M Remote Probe

Image: The ST100S-15 1.5-meter remote temperature probe, coiled, showing its connector and sensor tip.

คำแนะนำการใช้งาน

1. Configuring the Recorder

Place the TREX-8 into the LTI-HID Docking Station. Open the LogTag Analyzer software. The software will detect the connected recorder. Use the software to configure logging parameters such as start delay, logging interval, alarm thresholds, and recording duration.

2. Starting a Recording Session

Once configured via the software, remove the TREX-8 from the docking station. To initiate recording, press and hold the "Start/Mark" button on the device until the "OK" indicator light flashes. The device will begin logging data according to the programmed settings.

3. ตัวชี้วัดสถานะการติดตาม

บันทึกTag TREX-8 showing Alert and OK indicators

Image: Close-up of the LogTag TREX-8 showing the "ALERT" (red) and "OK" (green) indicator lights, along with the "Start/Mark" button.

4. Downloading Data

To download recorded data, re-insert the TREX-8 into the LTI-HID Docking Station while it is connected to your computer. Open the LogTag Analyzer software. The software will automatically detect the recorder and prompt you to download the data. Once downloaded, you can view, analyze, and export the temperature logs.

การซ่อมบำรุง

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Device not detected by software.Docking station not connected or drivers not installed.Ensure LTI-HID Docking Station is securely connected to USB. Reinstall LogTag Analyzer software to ensure drivers are present.
"ALERT" light is on.Temperature has gone outside configured limits.Check the environment where the probe is placed. Download data to review the temperature excursion details.
อุปกรณ์ไม่เริ่มบันทึกNot properly configured or "Start/Mark" button not held long enough.Re-configure the device using LogTag Analyzer. Ensure the "Start/Mark" button is pressed and held until the "OK" light flashes.
การอ่านอุณหภูมิไม่ถูกต้องDamaged probe or incorrect probe connection.Check the probe for visible damage. Ensure the probe is securely connected to the TREX-8 unit.

ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
แบบอย่างTREX-8
ประเภทโพรบExternal ST100S-15 Remote Probe
ช่วงการวัด-40°C ถึง 85°C (-40°F ถึง 185°F)
ความแม่นยำ±0.5 องศาเซลเซียส
แบตเตอรี่Non-replaceable, 2-3 years typical life
อุปกรณ์เสริมที่จำเป็นLTI-HID Docking Station (sold separately)

ข้อมูลการรับประกัน

บันทึกTag Recorders products are typically covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official LogTag เครื่องบันทึก webไซต์นี้ โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ยืนยันการรับประกัน

Legal Disclaimer: THIS PRODUCT IS NOT A VFC VACCINE MONITORING KIT - PLEASE SEE ITEM VAC-TRED30-KIT-2.

สนับสนุน

For technical support, software downloads, or additional product information, please visit the official LogTag เครื่องบันทึก website or contact their customer service department. Ensure you have your product model number (TREX-8) and any relevant purchase details ready when seeking support.

Official LogTag เก็บ: บันทึกTag ร้านค้าบน Amazon

เอกสารที่เกี่ยวข้อง - TREX-8-AMZ

พรีview บันทึกTag คู่มือเริ่มต้นใช้งานอย่างรวดเร็วสำหรับเครื่องวัดอุณหภูมิ TRED30-16CP
คู่มือเริ่มต้นใช้งานฉบับย่อนี้ให้คำแนะนำที่สำคัญสำหรับการตั้งค่า การกำหนดค่า และการใช้งานโปรแกรมบันทึกข้อมูลTag เครื่องบันทึกอุณหภูมิ TRED30-16CP ครอบคลุมถึงการดาวน์โหลดบันทึกข้อมูลTag ซอฟต์แวร์วิเคราะห์, การเริ่มต้นใช้งานอุปกรณ์, การตรวจสอบบันทึก, การดาวน์โหลดผลลัพธ์ และอุปกรณ์เสริมที่ใช้งานร่วมกันได้
พรีview บันทึกTag เอกสารข้อมูลทางเทคนิค TRED30-16U เครื่องวัดอุณหภูมิแบบโพรบภายนอก USB (ไฟล์ PDF)
รายละเอียดคุณสมบัติ ฟังก์ชัน และการใช้งานของ LogTag TRED30-16U, a multi-use USB PDF temperature logger designed for critical temperature monitoring in vaccine storage, transportation, medical centers, and laboratories. Features software-less operation, simplified LCD, and compliance with health guidelines.
พรีview บันทึกTag คู่มือเริ่มต้นใช้งานฉบับย่อ TRED30-16CP
คู่มือเริ่มต้นใช้งานอย่างรวดเร็วสำหรับบันทึกTag เครื่องบันทึกอุณหภูมิ TRED30-16CP ซึ่งมีรายละเอียดการติดตั้งซอฟต์แวร์ การกำหนดค่าอุปกรณ์ การเริ่มต้นและระหว่างขั้นตอนการบันทึก การดาวน์โหลดผลลัพธ์ และอุปกรณ์เสริมที่จำเป็น
พรีview บันทึกTag TRED30-16U: คู่มือผู้ใช้เครื่องบันทึกอุณหภูมิแบบ USB PDF สำหรับการตรวจสอบห่วงโซ่ความเย็น
คู่มือผู้ใช้ที่ครอบคลุมสำหรับบันทึกTag เครื่องบันทึกอุณหภูมิแบบ PDF ผ่าน USB TRED30-16U เรียนรู้เกี่ยวกับคุณสมบัติ การกำหนดค่า การทำงาน การตีความข้อมูล และข้อมูลจำเพาะทางเทคนิค เพื่อการตรวจสอบอุณหภูมิที่เชื่อถือได้
พรีview บันทึกTag คู่มือเริ่มต้นใช้งานเครื่องบันทึกข้อมูลอุณหภูมิฉบับย่อ
คู่มือเริ่มต้นใช้งานอย่างรวดเร็วสำหรับบันทึกTag เครื่องบันทึกข้อมูลอุณหภูมิซีรีส์ TRIX, TREX, SRIC, TRIL, SRIL และ TREL ครอบคลุมการตั้งค่าซอฟต์แวร์ การกำหนดค่าเครื่องบันทึก การทำงาน การดาวน์โหลดข้อมูล และการบำรุงรักษา
พรีview บันทึกTag คู่มือการเปลี่ยนแบตเตอรี่ CR2032
คำแนะนำทีละขั้นตอนสำหรับการเปลี่ยนแบตเตอรี่ CR2032 ในบันทึกTag อุปกรณ์บันทึกข้อมูล รวมถึงขั้นตอนการเตรียมการ การถอด และการติดตั้ง