การแนะนำ
This manual provides instructions for the proper installation and maintenance of Dirt Devil Style 2 Belts, designed for use with compatible Dirt Devil Broom Vacuums. Please read these instructions carefully before attempting to replace the belt.
ข้อมูลด้านความปลอดภัย
- Always unplug the vacuum cleaner from the electrical outlet before performing any maintenance or belt replacement.
- Allow the vacuum to cool down if it has been recently used, as some parts may be hot.
- Use only genuine Dirt Devil replacement parts to ensure proper fit and performance.
- เก็บมือ ผม และเสื้อผ้าที่หลวมให้ห่างจากชิ้นส่วนที่เคลื่อนไหว
การติดตั้งและการตั้งค่า
Follow these steps to replace the drive belt on your Dirt Devil Broom Vac:
- เตรียมเครื่องดูดฝุ่น: Ensure the vacuum cleaner is unplugged from the power outlet. Lay the vacuum flat on a clean, stable surface with the brush roll facing upwards.
- เข้าถึง Brush Roll: Depending on your specific Dirt Devil Broom Vac model, you may need to remove a bottom plate or cover to access the brush roll and belt. Refer to your vacuum's original user manual for specific instructions on accessing this area.
- ถอดสายพานเก่าออก: Carefully remove the worn or broken belt from around the brush roll and motor shaft. Note how the old belt was routed for easier installation of the new one.
- ติดตั้งสายพานใหม่: Loop one end of the new Dirt Devil Style 2 Belt around the motor shaft. Then, stretch the belt around the brush roll. Ensure the belt is centered and not twisted.
- ประกอบกลับเข้าที่: Once the new belt is securely in place, reattach any covers or plates that were removed. Ensure all screws are tightened.
- ทดสอบ: Plug in the vacuum and briefly turn it on to ensure the brush roll spins freely and the new belt is functioning correctly.
Image: Dirt Devil Style 2 Belts in original packaging. These belts are essential for the proper functioning of your Dirt Devil Broom Vac's brush roll.
ข้อควรพิจารณาในการดำเนินงาน
Once the new belt is installed, your Dirt Devil Broom Vac should operate as intended. A properly functioning belt ensures the brush roll spins effectively, agitating carpet fibers and picking up debris. If the brush roll does not spin or spins intermittently after belt replacement, re-check the installation steps.
การซ่อมบำรุง
Regular inspection of your vacuum's drive belt is crucial for optimal performance. Over time, belts can stretch, crack, or break due to normal wear and tear, or if the brush roll becomes jammed. Replace the belt immediately if you notice any signs of wear or if the brush roll stops spinning.
- ความถี่: Inspect the belt every 3-6 months, or more frequently if the vacuum is used heavily.
- สัญญาณการสึกหรอ: Look for cracks, fraying, stretching, or a glazed appearance on the belt.
- การทำความสะอาดลูกกลิ้งแปรง: Periodically remove hair and debris from the brush roll to prevent excessive strain on the belt.
การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Brush roll not spinning after belt replacement. | Belt not installed correctly; belt twisted; wrong belt type; brush roll jammed. | Unplug vacuum, re-check belt installation, ensure it's not twisted. Clear any obstructions from brush roll. Verify you are using a Style 2 belt. |
| Vacuum losing suction or not picking up debris effectively. | Worn or stretched belt; brush roll not spinning at optimal speed. | Inspect the belt for wear. If stretched or damaged, replace with a new Dirt Devil Style 2 Belt. Clean brush roll. |
ข้อมูลจำเพาะ
- ประเภทสินค้า : Replacement Vacuum Belt
- สไตล์เข็มขัด: สไตล์ 2
- ความเข้ากันได้: Designed for Dirt Devil Broom Vacuums requiring Style 2 belts.
- วัสดุ: ส่วนผสมยางที่ทนทาน
- ปริมาณ: Typically sold in packs of two (2) belts.
- ASIN: B009NQZ3KY
การรับประกันและการสนับสนุน
For specific warranty information regarding Dirt Devil replacement parts, please refer to the original product packaging or visit the official Dirt Devil website. For further assistance or troubleshooting, contact Dirt Devil customer support.
Dirt Devil Official Webเว็บไซต์: www.dirtdevil.com
