Fenton WPP16 6.5-inch Woofer Instruction Manual

1. บทนำ

Thank you for choosing the Fenton WPP16 6.5-inch Woofer. This manual provides essential information for the proper installation, operation, and maintenance of your new audio component. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

The Fenton WPP16 is a high-quality 6.5-inch (16cm) woofer designed for excellent bass reproduction. It is suitable for various applications, including HiFi speaker systems, car audio installations, or as a replacement driver for existing enclosures.

ภาพที่ 1: ด้านหน้า view of the Fenton WPP16 6.5-inch Woofer, showcasing its polypropylene cone and rubber surround.

2. คำแนะนำด้านความปลอดภัย

• ความปลอดภัยทางไฟฟ้า: Always disconnect power from any amplifier or audio system before installing or servicing the woofer. Improper wiring can cause damage to the woofer, amplifier, or pose an electrical hazard.
• การจัดการ: Handle the woofer carefully. Avoid touching the cone or surround with sharp objects. Do not drop the woofer.
• การจับคู่ค่าอิมพีแดนซ์: Ensure the woofer's impedance (8 Ohms) is compatible with your amplifier's output specifications. Mismatched impedance can lead to amplifier overheating or damage.
• การระบายอากาศ : Ensure adequate ventilation around the woofer and its enclosure to prevent overheating, especially during prolonged high-power operation.
• ระดับเสียง: Avoid operating the woofer at excessively high volume levels for extended periods, as this can cause permanent damage to the speaker.

3. เนื้อหาบรรจุภัณฑ์

• One (1) Fenton WPP16 6.5-inch Woofer

4. คุณสมบัติของผลิตภัณฑ์

The Fenton WPP16 woofer is engineered with the following key features:

• กรวยโพรพิลีน: Provides excellent rigidity and damping for accurate bass reproduction.
• Rubber Suspension: Durable and flexible, allowing for extended cone excursion and improved low-frequency response.
• การจัดการพลังงานสูง: Capable of handling up to 175 Watts maximum power (85 Watts RMS).
• ความต้านทานมาตรฐาน: 8 Ohms, compatible with a wide range of audio ampลิตเตอร์
• ช่วงความถี่กว้าง: Designed to reproduce frequencies from 35 Hz to 8 kHz.
• โครงสร้างแข็งแรงทนทาน: Features a heat-resistant voice coil and a substantial 850g (30 oz) magnet for reliable performance.

Image 2: The Fenton WPP16 Woofer highlighting its 6.5-inch polypropylene cone, 175W power handling, and 8 Ohm impedance.

5. การตั้งค่าและการติดตั้ง

Proper installation is crucial for the performance and safety of your woofer. Follow these steps carefully:

5.1 การติดตั้ง

1. Choose an Enclosure: The WPP16 is designed for use in a suitable speaker enclosure (e.g., sealed, ported, or bandpass). The enclosure's volume and tuning will significantly impact the woofer's performance. Consult speaker design resources for optimal enclosure parameters.
2. เตรียมรูยึด: Cut a circular hole in your enclosure with a diameter of 145 มิลลิเมตร (5.7 นิ้ว). Ensure the mounting surface is flat and rigid.
3. ตรวจสอบขนาด: Verify that the woofer's overall diameter (165 mm) and mounting depth (78 mm) fit your chosen location.
4. ยึดลำโพงวูฟเฟอร์ให้แน่น: Place the woofer into the mounting hole. Align the mounting holes on the woofer frame with the pre-drilled holes in your enclosure. Use appropriate screws (not included) to secure the woofer firmly, ensuring an airtight seal. Do not overtighten.

Image 3: Diagram illustrating the dimensions of the Fenton WPP16 Woofer, including overall diameter, mounting depth, and cutout diameter.

5.2 การเดินสายไฟ

1. ระบุเทอร์มินัล: The woofer has two terminals on the back. Typically, the wider terminal is positive (+) and the narrower one is negative (-). Refer to any markings on the woofer itself for confirmation.
2. เชื่อมต่อสายลำโพง: Use high-quality speaker wire of appropriate gauge for your power levels and cable length. Connect the positive (+) terminal of the woofer to the positive (+) output of your amplifier. Connect the negative (-) terminal of the woofer to the negative (-) output of your ampชีวิต.
3. ตรวจสอบขั้ว: การรักษาขั้วที่ถูกต้องระหว่างลำโพงทั้งหมดในระบบของคุณถือเป็นสิ่งสำคัญสำหรับการสร้างเสียงและการจัดตำแหน่งเฟสที่เหมาะสม
4. การเชื่อมต่อที่ปลอดภัย: ตรวจสอบให้แน่ใจว่าการเชื่อมต่อทั้งหมดแน่นหนาและปราศจากไฟฟ้าลัดวงจร

ภาพที่ 4: ด้านหลัง view of the Fenton WPP16 Woofer, showing the speaker terminals for wiring connections.

6. Operating the Woofer

Once installed and wired correctly, the Fenton WPP16 woofer operates as part of your audio system. Ensure your amplifier is powered on and set to a low volume level before playing audio. Gradually increase the volume to your desired listening level. For optimal performance, consider using a crossover network to direct only low frequencies to the woofer, preventing it from attempting to reproduce frequencies outside its intended range.

7. การบำรุงรักษา

• การทำความสะอาด: Use a soft, dry cloth to gently wipe dust from the cone and frame. Avoid using harsh chemicals or abrasive materials.
• การตรวจสอบ: Periodically inspect the woofer's cone, surround, and dust cap for any signs of damage or wear.
• สิ่งแวดล้อม: Keep the woofer away from direct sunlight, extreme temperatures, and excessive moisture.

8 การแก้ไขปัญหา

If you encounter issues with your Fenton WPP16 woofer, refer to the following common problems and solutions:

9. ข้อมูลจำเพาะ

Detailed technical specifications for the Fenton WPP16 6.5-inch Woofer:

Image 5: SPL vs Frequency Response graph, illustrating the acoustic performance characteristics of the Fenton WPP16 Woofer.

10. การรับประกันและการสนับสนุน

The Fenton WPP16 Woofer comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact your retailer. For technical support or further assistance, please reach out to the Fenton customer service department or your authorized dealer.