การแนะนำ
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your DISH DISH211 4-Device Universal Remote. Designed for ease of use, this remote supports DISH TV receivers and can control up to four different devices, including TVs and other entertainment systems. Its ability to learn commands from original remotes makes it a versatile replacement.

Figure 1: The DISH DISH211 4-Device Universal Remote, showcasing การออกแบบตามหลักสรีรศาสตร์และเค้าโครงปุ่ม
การตั้งค่า
1. การติดตั้งแบตเตอรี่
The DISH211 remote requires two (2) AA batteries for operation. To install:
- ค้นหาช่องใส่แบตเตอรี่ที่ด้านหลังของรีโมท
- เลื่อนฝาครอบแบตเตอรี่ลงด้านล่าง แล้วยกขึ้นเพื่อเปิด
- Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align with the indicators inside the compartment.
- Replace the battery cover by sliding it upwards until it clicks into place.
2. Device Pairing and Programming
The DISH211 remote can be programmed to control your DISH receiver and other devices. It supports both Infrared (IR) and Ultra High Frequency (UHF) communication, depending on your receiver model.

Figure 2: Cover of the official DISH Remote User Guide, which provides detailed programming instructions.
For DISH Receiver Pairing (UHF/IR):
Some DISH receivers may require setting the remote's address and communication type (UHF or IR). A small switch near the battery compartment may allow selection between UHF and IR modes. Ensure this switch is set correctly for your receiver type.
To address the remote to your receiver:
- กดปุ่ม ข้อมูลระบบ button on the front of your receiver to access the system information screen.
- กดปุ่มค้างไว้ นั่ง button on the remote until all mode lights illuminate.
- Enter a number between 1-15 on the remote keypad. This number corresponds to the TV-2 UHF address displayed on your receiver's screen.
- กดปุ่ม # (pound) button once.
- กดปุ่ม บันทึก ปุ่มสามครั้ง
- เลือก เสร็จแล้ว on the system info screen and test the remote's functionality.
For Other Devices (TV, DVD, AUX):
The remote has a large code library and can learn commands from your original remotes. Refer to the official DISH remote user guide (often included with the product or available online) for specific programming codes and learning instructions for various brands and device types.

Figure 3: The back of the DISH remote packaging, indicating compatible DISH receiver models for both IR and IR/UHF configurations.
คำแนะนำการใช้งาน
The DISH211 remote is designed for intuitive control of your entertainment system. It features backlit active MODE keys for visibility in low light conditions and dedicated DVR controls.
1. การเลือกโหมด
Press the desired mode button (e.g., นั่ง for DISH receiver, TV for television, ดีวีดี for DVD player, อ๊อกซ์ for auxiliary device) at the top of the remote to select the device you wish to control. The selected mode button will illuminate.
2. การควบคุมพื้นฐาน
- พลัง: กดปุ่ม พลัง button to turn the selected device on or off.
- ปริมาณ: ใช้ เพิ่ม/ลดระดับเสียง buttons to adjust the audio level of your television.
- ช่อง: ใช้ ช่องขึ้น/ลง buttons to change channels on your DISH receiver or television.
- ปิดเสียง: กดปุ่ม MUTE button to silence the audio.
- ป้อนข้อมูล: กดปุ่ม ป้อนข้อมูล button to cycle through video inputs on your television.
3. DVR Controls
The remote includes dedicated buttons for DVR functionality:
- บันทึก: เริ่มบันทึกรายการปัจจุบัน
- เล่น/หยุดชั่วคราว: Starts or pauses playback of recorded content or live TV.
- หยุด: หยุดการเล่น
- กรอกลับ/กรอไปข้างหน้า: Controls playback speed and direction.
- Skip Forward (DISH Skip Forward): Allows quick skipping through commercials or segments.
- ข้ามกลับ: Skips backward in recorded content.

รูปที่ 4: ระยะใกล้ view of the DISH DISH211 remote, highlighting the central navigation and DVR control buttons.
การซ่อมบำรุง
1. การเปลี่ยนแบตเตอรี่
When the remote's performance degrades or buttons become unresponsive, it is likely time to replace the batteries. Follow the battery installation steps outlined in the Setup section.
2. การทำความสะอาด
To clean your remote, gently wipe the surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using excessive liquid or harsh chemicals, as these can damage the remote's electronics or finish.
การแก้ไขปัญหา
รีโมตไม่ตอบสนอง
- ตรวจสอบแบตเตอรี่: ตรวจสอบให้แน่ใจว่าติดตั้งแบตเตอรี่อย่างถูกต้องและมีประจุเพียงพอ เปลี่ยนแบตเตอรี่หากจำเป็น
- Line of Sight (IR): If using IR mode, ensure there is a clear line of sight between the remote and the device's IR receiver. Obstructions can block the signal.
- การเลือกโหมด: Verify that the correct mode button (e.g., SAT, TV) is selected for the device you are trying to control.
- Remote Address/UHF-IR Switch: For DISH receivers, confirm the remote's address is correctly set and the UHF/IR switch (if present) matches your receiver's configuration. Incorrect settings can prevent communication.
การทำงานแบบไม่สม่ำเสมอ
- การรบกวน: Other electronic devices or strong light sources (like plasma TV IR interference) can sometimes interfere with IR signals. Try operating the remote from a different angle or location.
- DVR Directory Update: If experiencing lag or unresponsiveness with DVR functions, ensure your DVR's directory is updated. Consult your DISH receiver's manual for instructions on updating its software or directory.
ปุ่มไม่ทำงาน
- รีโมตทำความสะอาด: Dirt or debris under buttons can cause them to stick or become unresponsive. Clean the remote as described in the Maintenance section.
- Reprogram: If specific buttons for a device are not working, the remote may need to be reprogrammed for that device.
ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| หมายเลขรุ่น | DISH211 |
| ยี่ห้อ | จาน |
| ขนาดสินค้า | 1.75 x 4.81 x 11.38 นิ้ว |
| น้ำหนักสินค้า | 9.6 ออนซ์ |
| แบตเตอรี่ที่จำเป็น | แบตเตอรี่ AA 2 ก้อน |
| จำนวนอุปกรณ์ที่รองรับสูงสุด | 4 |
| อุปกรณ์ที่รองรับ | Television, DISH TV receivers (TV1 and TV2 locations) |
| เทคโนโลยีการเชื่อมต่อ | Infrared (IR), Ultra High Frequency (UHF) |
| คุณสมบัติพิเศษ | Backlit keys, Universal compatibility, Learning capability |
การรับประกันและการสนับสนุน
ข้อมูลการรับประกัน
The DISH DISH211 Universal Remote typically comes with a การรับประกันแบบจำกัด 90 วัน. Please refer to the documentation enclosed with your product for specific terms, conditions, and details regarding warranty claims.
การสนับสนุนลูกค้า
For further assistance with programming, troubleshooting, or general inquiries, it is recommended to consult the official DISH Network support resources. This may include their website, online user guides, or customer service contact information. The manufacturer of this product is Audiovox Accessories Corporation.





