แฟนเทค FG4

คู่มือผู้ใช้พัดลมหอยโข่งแบบอินไลน์ Fantech FG4 ขนาด 4 นิ้ว 135 CFM

Model: FG4 | Brand: FANTECH

การแนะนำ

This user manual provides essential information for the safe and efficient installation, operation, and maintenance of your Fantech FG4 4" Duct 135 CFM Inline Centrifugal Fan. Please read this manual thoroughly before installation and retain it for future reference.

Fantech FG4 Inline Centrifugal Fan

Image: The Fantech FG4 4-inch inline centrifugal fan, featuring a silver metallic housing and a black electrical box attached to its side. This fan is designed for duct installation.

ข้อมูลด้านความปลอดภัย

การติดตั้งและการตั้งค่า

The Fantech FG4 fan is designed for inline duct installation. Follow these steps for proper setup:

  1. ตำแหน่งการติดตั้ง: Select a suitable location in the ductwork that allows for easy access for maintenance and provides adequate space around the fan for airflow. The fan can be mounted at any angle.
  2. การเชื่อมต่อท่อ: Connect the fan to 4-inch diameter ductwork using appropriate clamps or tape to ensure an airtight seal.
  3. สายไฟฟ้า:
    • Ensure power is disconnected at the circuit breaker before wiring.
    • Connect the fan's electrical wires to the power supply according to the wiring diagram provided inside the fan's junction box cover.
    • The fan operates on 12 Volts. Verify your power supply matches this requirement.
    • All wiring must comply with local and national electrical codes (e.g., NEC).
  4. การทดสอบ: Once installed and wired, restore power and test the fan's operation.

คำแนะนำการใช้งาน

The Fantech FG4 fan is designed for continuous or intermittent operation to move air through duct systems. It can be controlled via a standard wall switch or a compatible remote control system (if applicable and purchased separately).

การซ่อมบำรุง

การบำรุงรักษาอย่างสม่ำเสมอจะช่วยให้พัดลม Fantech FG4 ของคุณทำงานได้อย่างมีประสิทธิภาพสูงสุดและมีอายุการใช้งานยาวนาน

  1. การตัดการเชื่อมต่อไฟฟ้า: Always disconnect power to the fan at the circuit breaker before performing any maintenance.
  2. การทำความสะอาดใบพัดพัดลม:
    • Periodically inspect the fan blades for dust and debris accumulation.
    • Carefully wipe the blades with a soft, damp ผ้า ห้ามใช้สารทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลาย
    • Ensure blades are dry before restoring power.
  3. การหล่อลื่นมอเตอร์: มอเตอร์พัดลมได้รับการหล่อลื่นอย่างถาวรและไม่จำเป็นต้องหล่อลื่นเพิ่มเติม
  4. การตรวจสอบท่อลม: Periodically check the ductwork connected to the fan for any blockages or leaks that could impede airflow.

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
พัดลมไม่ทำงานไม่มีแหล่งจ่ายไฟ
สายไฟหลวม
มอเตอร์ขัดข้อง
ตรวจสอบเบรกเกอร์วงจรและสวิตช์ไฟ
ตรวจสอบให้แน่ใจว่าการเชื่อมต่อทางไฟฟ้าทั้งหมดแน่นหนาดีแล้ว (โดยปิดไฟก่อน)
Contact Fantech support if motor is faulty
ลดการไหลเวียนของอากาศท่อลมอุดตัน
ใบพัดลมสกปรก
Incorrect fan speed setting
Inspect and clear duct obstructions
Clean fan blades (see Maintenance section)
Adjust speed controller if applicable
เสียงดังเกินไปติดตั้งหลวม
เศษซากในพัดลม
Damaged fan blades
ตรวจสอบให้แน่ใจว่าพัดลมติดตั้งแน่นสนิทแล้ว
ตรวจสอบและกำจัดเศษซากใด ๆ
Contact Fantech support if blades are damaged

ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
ชื่อรุ่นเอฟจี 4
ยี่ห้อแฟนเทค
ขนาดท่อ4 นิ้ว
ความจุการไหลของอากาศ135 ลูกบาศก์ฟุตต่อนาที (CFM)
แหล่งพลังงานสายไฟ
เล่มที่tage12 โวลต์
การใช้งานภายใน/ภายนอกอาคารในร่ม
การรับรองซีเอสเอ, ยูแอล
วัสดุPlastic (Blades), Metallic (Housing)

การรับประกันและการสนับสนุน

Fantech products are manufactured to the highest standards and are backed by a limited warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official Fantech webเว็บไซต์.

For technical support, replacement parts, or warranty claims, please contact Fantech customer service:

When contacting support, please have your product model number (FG4) and purchase date available.

เอกสารที่เกี่ยวข้อง - เอฟจี 4

พรีview คู่มือการติดตั้งและการใช้งานพัดลมหอยโข่งอินไลน์ซีรีส์ Fantech FG
คู่มือการติดตั้งและการใช้งานพัดลมท่อแบบแรงเหวี่ยง Fantech FG Series ประกอบด้วยคำเตือนด้านความปลอดภัย ขนาด ขั้นตอนการติดตั้ง แผนผังสายไฟ การแก้ไขปัญหา การบำรุงรักษา และข้อมูลการรับประกัน
พรีview คู่มือการติดตั้งและการใช้งานพัดลมแบบแรงเหวี่ยงชนิดอินไลน์ Fantech รุ่น FRD
คู่มือการติดตั้งและการใช้งานพัดลมแบบแรงเหวี่ยงชนิดติดตั้งในท่อรุ่น FRD ของ Fantech ครอบคลุมชิ้นส่วน ความปลอดภัย การติดตั้ง ขนาด การเดินสายไฟ และการรับประกัน มีใบรับรองมาตรฐาน AMCA และ UL/cULus
พรีview คู่มือและคำแนะนำการติดตั้งพัดลม Fantech FSD Series
คู่มือการติดตั้งโดยละเอียด คำเตือนด้านความปลอดภัย ภาพประกอบการติดตั้ง ข้อมูลขนาด แผนผังการเดินสายไฟ และข้อมูลการรับประกันสำหรับพัดลมระบายอากาศแบบติดตั้งในท่อรุ่น Fantech FSD Series รวมถึงรุ่น FSD 18, FSD 20, FSD 22 และ FSD 26
พรีview คู่มือการติดตั้งและการใช้งานพัดลมระบายอากาศสำหรับเครื่องอบผ้า Fantech DEDPV-705
คู่มือนี้ให้คำแนะนำอย่างละเอียดเกี่ยวกับการติดตั้งและการใช้งานพัดลมระบายอากาศสำหรับท่อลมเครื่องอบผ้า Fantech DEDPV-705 ประกอบด้วยข้อมูลด้านความปลอดภัยที่สำคัญ คู่มือการติดตั้งทีละขั้นตอน ลำดับการใช้งาน คำแนะนำในการบำรุงรักษา เคล็ดลับการแก้ไขปัญหา และรายละเอียดการรับประกัน
พรีview พัดลมแบบติดตั้งในท่อ Fantech Minitube - ข้อมูลจำเพาะทางเทคนิค
สำรวจพัดลมแกนหมุนแบบติดตั้งในท่อรุ่น Minitube จาก Fantech เอกสารนี้ให้รายละเอียดเกี่ยวกับข้อมูลจำเพาะทางเทคนิค ขนาด ข้อมูลประสิทธิภาพ และอุปกรณ์เสริมที่มีให้เลือกใช้ สำหรับการใช้งานด้านการระบายอากาศในเชิงพาณิชย์และอุตสาหกรรม
พรีview คู่มือการติดตั้งและการใช้งานพัดลมแบบแรงเหวี่ยงอินไลน์ Fantech รุ่น FKD/KD
คู่มือฉบับสมบูรณ์สำหรับการติดตั้ง การใช้งาน และข้อควรระวังด้านความปลอดภัยสำหรับพัดลมแรงเหวี่ยงแบบอินไลน์ Fantech รุ่น FKD/KD ประกอบด้วยคำแนะนำหลายภาษา ขนาด แผนผังการต่อสายไฟ และข้อมูลการรับประกัน