คู่มือผู้ใช้สวิตช์หรี่ไฟ X10 (WS12A) 500 วัตต์

1. บทนำ

The X10 Dimmer Switch (WS12A) is designed to replace traditional dimmer switches, enabling remote control capabilities for your dimmable wired lighting fixtures. This switch controls incandescent lights up to 500 Watts and integrates with X10 home automation systems. It supports both local and remote operation for ON/OFF, BRIGHTEN/DIM functions, and responds to ALL LIGHTS ON X10 commands.

This manual provides detailed instructions for the installation, operation, and maintenance of your X10 Dimmer Switch.

รูปที่ 1: X10 Dimmer Switch (WS12A). A white X10 Dimmer Switch (model WS12A) with a rocker-style paddle. The switch is designed for wall installation and includes a small power cutoff switch at the bottom of the rocker.

2. คุณสมบัติหลัก

• Provides local and X10 control for a wired dimmable light.
• Controls incandescent lights up to 500 Watts.
• Works in single-pole or multi-way applications.
• Includes white and ivory rocker paddles for aesthetic customization.
• Does not require a neutral wire for installation.
• Features a power cutoff switch for safe bulb changing.

3. เนื้อหาบรรจุภัณฑ์

โปรดตรวจสอบให้แน่ใจว่ามีอุปกรณ์ครบถ้วนก่อนเริ่มการติดตั้ง:

• X10 Dimmer Switch (WS12A)
• White Rocker Paddle
• Ivory Rocker Paddle

บันทึก: A wallplate is not included and must be purchased separately.

4. ข้อมูลด้านความปลอดภัย

คำเตือน: To avoid fire, shock, or death; turn off power at the circuit breaker or fuse box and test that the power is off before wiring.

• อุปกรณ์นี้มีไว้สำหรับการติดตั้งตามรหัสไฟฟ้าแห่งชาติและข้อบังคับท้องถิ่น
• ขอแนะนำให้ช่างไฟฟ้าที่มีคุณสมบัติเป็นผู้ดำเนินการติดตั้ง
• Do not use with non-dimmable loads, motor loads, or fluorescent lighting. This switch is designed for incandescent loads only.
• ตรวจสอบให้แน่ใจว่าวัตต์รวมtage of connected lights does not exceed 500 Watts.
• ห้ามติดตั้งหากผลิตภัณฑ์มีร่องรอยความเสียหาย

5. คำแนะนำในการติดตั้ง

5.1 ก่อนที่คุณจะเริ่มต้น

1. ปิดเครื่อง at the circuit breaker or fuse box for the light switch location.
2. Remove the existing wallplate and switch from the wall box.
3. Identify the line (hot), load, and ground wires. This switch does not require a neutral wire.

5.2 Wiring the Dimmer Switch

The X10 Dimmer Switch can be used in single-pole applications (controlling lights from one location) or 3-way/4-way applications (controlling lights from multiple locations). For multi-way applications, a companion switch (sold separately) is required.

• Connect the line (hot) wire to the designated terminal on the dimmer switch.
• Connect the load wire (to the light fixture) to the designated terminal on the dimmer switch.
• Connect the ground wire to the green ground screw on the dimmer switch.
• For multi-way installations, refer to the wiring diagram provided with your companion switch.

Secure all wire connections using screw terminals. Ensure no bare wire is exposed.

5.3 ขั้นตอนสุดท้าย

1. Carefully push the wired switch into the wall box.
2. Mount the switch to the wall box using the provided screws.
3. Attach the desired rocker paddle (white or ivory) to the switch.
4. Install a compatible wallplate (not included).
5. เรียกคืนพลังงานที่เบรกเกอร์

6. คู่มือการใช้งาน

6.1 การควบคุมภายใน

• เปิด/ปิด: Press the top of the rocker to turn the light ON. Press the bottom of the rocker to turn the light OFF.
• BRIGHTEN: Press and hold the top of the rocker to gradually brighten the light. Release when the desired brightness is reached.
• ติ่มซำ: Press and hold the bottom of the rocker to gradually dim the light. Release when the desired brightness is reached.
• The dimmer takes approximately 3 seconds to adjust lights from Off to Full Bright and vice versa.

6.2 Remote X10 Control

The X10 Dimmer Switch responds to standard X10 commands from compatible X10 controllers (sold separately). Ensure your X10 system is properly configured with the correct house and unit codes for the dimmer switch.

• เปิด/ปิด: The switch will respond to X10 ON and OFF commands for its assigned unit code.
• BRIGHTEN/DIM: The switch will respond to X10 BRIGHTEN and DIM commands for its assigned unit code.
• ALL LIGHTS ON: The switch will respond to the X10 ALL LIGHTS ON command for its assigned house code.

6.3 Power Cutoff Switch

A small power cutoff switch is located directly below the main rocker switch. This allows you to safely cut power to the connected light fixture for bulb changing or maintenance without needing to go to the circuit breaker.

7. การบำรุงรักษา

• To clean the dimmer switch, ensure power is OFF at the circuit breaker.
• เช็ดพื้นผิวด้วยความนุ่มนวลงamp ผ้า ห้ามใช้สารทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลาย
• Ensure the switch is completely dry before restoring power.

8 การแก้ไขปัญหา

9. ข้อมูลจำเพาะ

10. การรับประกันและการสนับสนุน

Specific warranty information for the X10 Dimmer Switch (WS12A) is not provided in this manual. For details regarding warranty coverage, technical support, or replacement parts, please contact the manufacturer directly or refer to the product packaging.

You may also visit the official X10 webเว็บไซต์สำหรับแหล่งข้อมูลเพิ่มเติมและข้อมูลการติดต่อ