Alphacool DC-LT 3600 Ceramic Pump User Manual

1. บทนำและเรื่องอื่นๆview

The Alphacool DC-LT ceramic 12 Volt pump is a compact and powerful solution designed for water cooling systems, particularly suitable for barebones, HTPC, and desktop systems where quiet operation is a priority. While traditional water cooling often targets extreme overclocking, this pump focuses on providing efficient cooling with minimal noise, contributing to an overall silent system. Its ceramic shaft ensures a long lifespan and consistently smooth operation. With dimensions comparable to a 2 Euro coin, it is one of the most compact water cooling pumps available for computer cooling applications.

2. คุณสมบัติของผลิตภัณฑ์

• 12V ceramic pump for water cooling applications.
• Compact dimensions (WxHxD): 51x48x9mm (without fittings), making it highly space-efficient.
• Maximum flow rate of approximately 120 liters per hour (l/h).
• Pressure head at 12V: 2.2 meters H2O.
• Power connector: Standard 3-Pin fan plug for easy integration.
• ฉบับที่ได้รับอนุญาตtagช่วงแรงดันไฟฟ้า: 5-13.5V DC
• Designed for quiet operation, though noise levels can vary based on voltage and system setup.
• Ceramic shaft for extended durability and smooth performance.

3. เนื้อหาบรรจุภัณฑ์

โปรดตรวจสอบว่าสินค้าทั้งหมดที่ระบุไว้ด้านล่างนี้มีอยู่ในแพ็คเกจของคุณ:

• 1x Alphacool DC-LT Ceramic 12 Volt Pump (Bulk Version)
• 2x M3x6 Allen Bolts
• Mounting Manual (this document)

Note: Mounting screws are not included with this bulk version pump. Additionally, this pump in its bulk version has no connection threads. It is recommended to order a suitable pump top from Alphacool's portfolio for proper installation and connection to your water cooling loop.

4. คำแนะนำในการตั้งค่า

Proper installation is crucial for the optimal performance and longevity of your Alphacool DC-LT pump. Follow these steps carefully:

1. การเปิดออกและการตรวจสอบ: Carefully remove the pump from its packaging. Inspect the pump for any visible damage that may have occurred during shipping.
2. Attaching a Pump Top/Reservoir: As this is a bulk version pump without integrated threads, you must attach a compatible Alphacool pump top or reservoir. This component provides the necessary inlet and outlet ports for your water cooling loop. Secure the pump to the chosen top/reservoir using the provided M3x6 allen bolts. Ensure a tight, secure fit to prevent leaks.
3. การติดตั้งปั๊ม: Mount the pump assembly securely within your PC case. Depending on your case and pump top, additional mounting hardware (e.g., M3x8mm screws for certain Alphacool products like the Repack – Dual DC-LT – 5.25 Single Bay station) may be required and is not included. Ensure the pump is mounted in a stable position to minimize vibrations.
4. Connecting to the Cooling Loop: Connect the inlet and outlet ports of the pump top to your water cooling loop components (radiator, CPU/GPU blocks, etc.) using appropriate fittings and tubing. Double-check all connections for tightness.
5. การเชื่อมต่อไฟฟ้า: Connect the pump's 3-Pin fan plug to a compatible 3-Pin header on your motherboard or a fan controller. Ensure the connection is firm. The pump operates on 12V DC.
6. การเติมลูป: Fill your water cooling loop with a suitable coolant. It is recommended to use a funnel and fill slowly to avoid air bubbles. Ensure the reservoir (if used) is adequately filled.
7. การทดสอบการรั่ว: Before powering on your entire system, perform a thorough leak test. Power the pump independently (e.g., using a dedicated power supply or by shorting the ATX power supply's green and black wires) and let it run for several hours (e.g., 12-24 hours) while carefully inspecting all connections for any signs of leaks. Place paper towels or absorbent material under connections to easily spot drips.

ภาพ: ระยะใกล้ view of the Alphacool DC-LT 3600 Ceramic Pump, showing the impeller and the compact housing. This image illustrates the core pump unit before a pump top or reservoir is attached.

5. คู่มือการใช้งาน

Once the pump is properly installed and the loop is filled and leak-tested, you can begin operation:

• เปิดเครื่องครั้งแรก: After confirming no leaks, power on your system. The pump should start circulating the coolant immediately.
• การระบายอากาศ: During the first few hours of operation, you may hear gurgling noises as air bubbles are purged from the system. Gently tilt your PC case in different directions to help trapped air move to the reservoir. Continue to monitor coolant levels and top up as needed.
• เล่มที่tagอี การควบคุม: The pump operates within a permitted voltage range of 5-13.5V DC. You can adjust the pump speed via your motherboard's fan control settings (if connected to a controllable header) or a dedicated fan controller. Lower voltages will result in quieter operation but reduced flow rate, while higher voltages increase flow rate and potentially noise.
• การติดตาม: Regularly monitor your system's temperatures to ensure the water cooling loop is functioning effectively.

6. การบำรุงรักษา

Regular maintenance helps ensure the longevity and efficiency of your water cooling system:

• การเปลี่ยนน้ำหล่อเย็น: It is recommended to replace the coolant in your loop every 6-12 months, or as recommended by your coolant manufacturer, to prevent buildup and maintain optimal performance.
• การล้างระบบ: When replacing coolant, consider flushing the entire loop with distilled water to remove any old coolant residue or contaminants.
• การตรวจสอบ: Periodically inspect tubing, fittings, and the pump for any signs of wear, leaks, or blockages. Ensure all connections remain secure.
• การทำความสะอาด: If necessary, the pump can be disassembled (after draining the loop) for cleaning of the impeller and ceramic shaft. Refer to specific instructions for your pump top/reservoir for disassembly.

7 การแก้ไขปัญหา

If you encounter issues with your Alphacool DC-LT pump, refer to the following common problems and solutions:

• ปั๊มไม่เริ่มทำงาน:
  • Check the 3-Pin power connection to ensure it is securely seated on the motherboard header or controller.
  • Verify that the power supply is providing power to the motherboard/controller.
  • Ensure the motherboard BIOS settings or fan control software are not set to turn off the fan header at low temperatures.
• เสียงดังเกินไป:
  • The Alphacool DC-LT 3600 pump is known to produce a noticeable noise level, especially at higher voltages (25 dB at specified conditions). This is a characteristic of the 3600 RPM version.
  • Reduce the pump's operating voltage (e.g., to 7V or lower) via your motherboard's fan control settings or a fan controller. This will decrease the pump speed and noise, but also the flow rate.
  • Ensure the pump is securely mounted and not vibrating against the case or other components.
  • Check for air trapped in the loop, which can cause gurgling or cavitation noise. Bleed the system thoroughly.
• No Flow or Low Flow:
  • Check coolant level in the reservoir; ensure it is not too low.
  • Verify that there are no kinks or severe bends in the tubing restricting flow.
  • Ensure all fittings are open and not blocked.
  • An airlock might be present. Try tilting the system to dislodge air bubbles.
  • If the pump has been running dry, it may be damaged.
• การรั่วไหล:
  • Immediately power down the system if a leak is detected.
  • Inspect all fittings and connections. Tighten any loose fittings.
  • ตรวจสอบโอริงและซีลว่าชำรุดหรือติดตั้งไม่สนิทหรือไม่ หากจำเป็นให้เปลี่ยนใหม่
  • Ensure tubing is properly seated on barbs or compression fittings.

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

For warranty information and technical support regarding your Alphacool DC-LT 3600 Ceramic Pump, please refer to the official Alphacool webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ในกรณีที่ต้องการเคลมประกัน