การแนะนำ
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Okin 2-Button DC Lift Chair or Power Recliner Hand Control. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
สินค้าเกินview
The Okin 2-Button Hand Control is designed for use with DC lift chairs and power recliners, providing simple and intuitive control over the chair's movement. It features two buttons for 'Up' and 'Down' functions, allowing users to adjust their chair to the desired position.
Figure 1: Okin 2-Button Hand Control. This image shows the black hand control unit with two white oval buttons (one for up, one for down) and a coiled cord leading to a 5-pin circular connector.
This hand control is compatible with various brands including Okin, Limoss, Action, Berkline, Comfort Chair, Golden, LazyBoy, Med-Lift, Mega Motion, and Pride chair motors.
การติดตั้งและการตั้งค่า
Before installation, ensure your lift chair or power recliner is unplugged from the power outlet to prevent accidental operation or electrical shock.
- ระบุตัวเชื่อมต่อ: Locate the existing hand control cable connected to your chair's motor or control box. The Okin 2-button hand control typically uses a 5-pin straight connector.
- Disconnect Old Control (if applicable): Carefully unplug the old hand control from the chair's motor or control box. Note the orientation of the connector if it's not keyed.
- Connect New Control: Align the 5-pin connector of the new Okin hand control with the corresponding port on your chair's motor or control box. Gently push the connector in until it is firmly seated. Ensure the connection is secure.
- ยึดสายเคเบิล: Route the cable in a way that it will not be pinched or tangled during chair operation.
- คืนค่าพลัง: Once the hand control is securely connected, plug your lift chair or power recliner back into the power outlet.
Figure 2: Detail of the 5-pin straight connector. This image highlights the circular 5-pin male connector on the hand control cable, with an inset showing the corresponding female port with five pin receptacles.
If you encounter difficulty, consult your chair's original manual or a qualified technician.
คำแนะนำการใช้งาน
The Okin 2-Button Hand Control provides simple operation for your lift chair or power recliner.
- "Up" Button: Press and hold the "Up" button (typically the top button) to raise the chair's footrest and/or recline the backrest, or to lift the chair to a standing assist position. Release the button to stop movement.
- "Down" Button: Press and hold the "Down" button (typically the bottom button) to lower the chair's footrest and/or bring the backrest upright, or to lower the chair from a standing assist position back to a seated position. Release the button to stop movement.
Always ensure the area around the chair is clear before operating to prevent obstructions or injury.
การบำรุงรักษาและการดูแล
Proper care will extend the life of your hand control.
- การทำความสะอาด: Wipe the hand control with a clean, damp cloth. Do not use abrasive cleaners or immerse the control in water.
- การจัดการสายเคเบิล: Avoid kinking, pinching, or excessive pulling on the cable. Ensure it is not caught in moving parts of the chair.
- พื้นที่จัดเก็บ: When not in use for extended periods, store the hand control in a dry place away from direct sunlight and extreme temperatures.
- การตรวจสอบ: Periodically inspect the cable and connector for any signs of wear, fraying, or damage. If damage is observed, discontinue use and replace the control.
การแก้ไขปัญหา
If your hand control is not functioning as expected, try the following troubleshooting steps:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Chair does not move when buttons are pressed. |
|
|
| Chair moves intermittently. |
|
|
For issues not resolved by these steps, contact the manufacturer or a certified repair service.
ข้อมูลจำเพาะ
- ยี่ห้อ: โอกิน
- หมายเลขรุ่น: 8541831861
- สี: สีดำ
- ประเภทตัวเชื่อมต่อ: 5-pin straight connector
- น้ำหนักสินค้า: 7.4 ออนซ์
- ขนาดแพ็คเกจ: 8.15 x 2.6 x 2.6 นิ้ว
- ความเข้ากันได้: Designed for DC lift chairs and power recliners; compatible with Okin, Limoss, Action, Berkline, Comfort Chair, Golden, LazyBoy, Med-Lift, Mega Motion, Pride, and other brands chair motors.
การรับประกันและการสนับสนุน
For information regarding warranty coverage or technical support, please refer to the documentation provided with your original purchase or contact Okin customer service directly. Contact details can typically be found on the manufacturer's official webไซต์หรือผ่านผู้ค้าปลีกผลิตภัณฑ์ของคุณ
หากต้องการความช่วยเหลือเพิ่มเติม คุณสามารถไปที่ ร้าน Okin บน Amazon.
