คู่มือการใช้งานเสาอากาศภายนอกอาคารแบบหมุนได้ 360° รุ่น QFX ANT-106 HD/DTV/UHF/VHF/FM

การแนะนำ

This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your QFX ANT-106 HD/DTV/UHF/VHF/FM 360° Rotating Outdoor Antenna. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

The QFX ANT-106 is an amplified 360-degree rotating outdoor antenna designed to receive HD, DTV, VHF, UHF, and FM signals. It supports HDTV resolutions including 720p, 1080i, and 1080p. The antenna features a motorized rotation function controlled by a remote, and it can distribute signals to up to two television sets.

เนื้อหาแพ็คเกจ

ตรวจสอบว่าส่วนประกอบทั้งหมดอยู่ครบก่อนเริ่มประกอบ:

• QFX ANT-106 Rotating Outdoor Antenna Unit
• Motorized Rotator Base
• รีโมทคอนโทรล
• อะแดปเตอร์แปลงไฟสำหรับ Ampชีวิต
• Coaxial Cable (length may vary)
• Mounting Hardware (U-bolts, nuts, washers)
• คู่มือการใช้งาน

Note: Specific components may vary slightly. Refer to the packaging for a complete list.

ข้อมูลด้านความปลอดภัยที่สำคัญ

Please read and understand all safety warnings before installing or operating this antenna.

• ความปลอดภัยทางไฟฟ้า: Ensure all power connections are secure and follow local electrical codes. Do not operate with damaged cables or power adapters.
• ความปลอดภัยในการติดตั้ง: Antenna installation can be dangerous. Exercise extreme caution when working at heights or near power lines. Consider professional installation if you are not comfortable performing the task.
• สภาพอากาศ : Avoid installation during lightning storms, strong winds, or other adverse weather conditions.
• การจัดการสินค้า: The antenna elements can be delicate. Handle with care during assembly and installation to prevent bending or damage.
• คำเตือนข้อเสนอ 65: ผลิตภัณฑ์นี้อาจทำให้คุณสัมผัสกับสารเคมีที่รัฐแคลิฟอร์เนียระบุว่าอาจก่อให้เกิดมะเร็งและอันตรายต่อระบบสืบพันธุ์ สำหรับข้อมูลเพิ่มเติม โปรดเยี่ยมชม www.P65Warnings.ca.gov.

การติดตั้งและการตั้งค่า

1. Antenna Assembly

Carefully unpack all components. The antenna elements are designed to be assembled onto the main frame. Refer to the diagrams below for proper placement and secure all connections. Some elements may require gentle insertion into the frame. Avoid excessive force to prevent damage.

ภาพที่ 1: เกินview of the QFX ANT-106 antenna components. This image shows the various elements and the central mounting unit of the antenna before full assembly.

ภาพที่ 2: A fully assembled QFX ANT-106 antenna, ready for mounting. This view highlights the complete structure of the antenna with all elements in place.

2. การเลือกตำแหน่งการติดตั้ง

Choose a mounting location that is as high as possible and free from obstructions such as trees, buildings, or other structures that could block signal reception. Common locations include rooftops, gables, or mast poles. Ensure the chosen location allows for safe access for installation and future maintenance.

ภาพที่ 3: The QFX ANT-106 antenna mounted on a rooftop against a clear blue sky. This illustrates a typical outdoor installation scenario for optimal signal reception.

ภาพที่ 4: The QFX ANT-106 antenna installed on a red tile roof with mountains in the background. This image demonstrates the antenna's placement in a residential setting, emphasizing its outdoor design.

3. การติดตั้งเสาอากาศ

Securely attach the antenna to a mast or mounting pole using the provided U-bolts and hardware. Ensure the antenna is level and firmly tightened to withstand wind and weather conditions. The motorized base should be oriented to allow for 360° rotation without obstruction.

4. การเชื่อมต่อสายไฟ

1. Connect one end of the coaxial cable to the antenna's output port.
2. Route the coaxial cable safely from the antenna to your television(s) or DTV tuner, avoiding sharp bends or kinks.
3. Connect the other end of the coaxial cable to the input of the included amplifier/power injector unit.
4. เชื่อมต่อ amplifier's output to your television's "Antenna In" or "RF In" port. If connecting to multiple TVs, use a signal splitter (not included) after the ampชีวิต.
5. เสียบอะแดปเตอร์ไฟเข้ากับ amplifier unit and then into a standard electrical outlet.

ภาพที่ 5: This image displays the QFX ANT-106 antenna along with its remote control and an illustration of its signal reception capabilities, including a 45-mile range and 4K Ultra HD support. It also shows the types of local TV networks it can receive.

คำแนะนำการใช้งาน

1. การสแกนช่องสัญญาณเบื้องต้น

After installation and power connection, perform a channel scan on your television or DTV tuner. This process allows your TV to detect and store available over-the-air channels. Refer to your TV's instruction manual for specific steps on how to perform a channel scan (often found in the 'Settings' or 'Setup' menu under 'Channel' or 'Antenna').

2. การใช้รีโมทคอนโทรล

The included remote control operates the motorized rotation of the antenna. Point the remote towards the antenna's receiver (usually located on the amplifier unit or the antenna's base). Use the directional buttons to rotate the antenna 360 degrees to optimize signal reception for different channels.

• Rotate Left/Right Buttons: Press to rotate the antenna clockwise or counter-clockwise.
• ปุ่มเปิด/ปิด: Turns the antenna's rotation motor on/off.

Tip: Rotate the antenna slowly and pause at various points to check signal strength on your TV. Perform a channel scan after adjusting the antenna's direction if new channels become available or existing ones improve.

3. Connecting Multiple TVs

The QFX ANT-106 can feed signals to up to two TV sets. If you wish to connect more than one TV, use a high-quality signal splitter (75 Ohm, not included) connected to the output of the amplifier unit. Ensure all unused splitter ports are terminated with 75 Ohm terminators to prevent signal loss.

การซ่อมบำรุง

• การตรวจสอบปกติ: Periodically inspect the antenna, mounting hardware, and coaxial cables for any signs of wear, corrosion, or damage, especially after severe weather.
• การทำความสะอาด: Gently clean the antenna elements with a soft, damp cloth if dirt or debris accumulates. Do not use harsh chemicals or abrasive materials.
• การจัดการสายเคเบิล: Ensure coaxial cables are securely fastened and not exposed to excessive tension or abrasion.
• Motorized Unit: The motorized rotation unit is generally maintenance-free. If rotation becomes stiff or erratic, check for obstructions or loose connections.

การแก้ไขปัญหา

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

For warranty information and technical support, please refer to the documentation included with your product or visit the official QFX webไซต์ โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อสำหรับการเรียกร้องการรับประกัน

QFX Store Link: Visit the QFX Store on Amazon