Gerber DA507348N

คู่มือการใช้งานตลับเซรามิก Gerber Danze DA507348N

1. สินค้าหมดview

The Gerber Danze DA507348N is a ceramic disc cartridge designed as a replacement part for various Danze single-handle faucets. This component is crucial for controlling water flow and temperature in compatible faucet models, restoring proper function and preventing leaks.

Gerber Danze DA507348N Ceramic Disc Cartridge

Image 1: The Gerber Danze DA507348N Ceramic Disc Cartridge. This image displays the blue and white ceramic disc cartridge with its stem, ready for installation into a compatible single-handle faucet.

2. ข้อมูลจำเพาะ

  • หมายเลขรุ่น: DA507348N
  • พิมพ์: ตลับดิสก์เซรามิก
  • ความเข้ากันได้: Designed for Danze single-handle faucets
  • วัสดุ: เซรามิก, พลาสติก
  • ขนาด : ประมาณ 2.25 x 1.25 x 1.25 นิ้ว
  • น้ำหนักสินค้า: ประมาณ 1.45 ออนซ์
  • แทนที่: Danze model DA507048N

3. Compatible Faucet Models

This ceramic disc cartridge is compatible with the following Danze single-handle faucet models:

  • ดี153244, ดี155040, ดี201014, ดี201244, ดี203112
  • ดี215158, ดี216454, ดี216540, ดี220111, ดี221040
  • ดี222158, ดี223140, ดี223544, ดี403412, ดี403512
  • ดี403612, ดี403712, ดี403812, ดี404214, ดี404444
  • ดี404458, ดี404854, ดี405040, ดี455612, ดี457015

It also serves as a replacement for the older Danze model DA507048N.

4. คำแนะนำในการติดตั้ง

Follow these steps to replace the ceramic disc cartridge in your Danze single-handle faucet. It is recommended to consult your specific faucet's manual for detailed disassembly instructions, as designs may vary.

4.1. ก่อนที่คุณจะเริ่มต้น

  1. ปิดแหล่งจ่ายน้ำ: Locate the hot and cold water shut-off valves under the sink and turn them clockwise until fully closed. Open the faucet handle to relieve any remaining water pressure.
  2. รวบรวมเครื่องมือ: You may need a flathead screwdriver, Phillips head screwdriver, Allen (hex) wrench (often 2.5mm), channel lock pliers, and plumber's grease.

4.2. Removing the Old Cartridge

  1. ถอดที่จับก๊อกน้ำ: Typically, there is a small decorative cap or plug on the handle that conceals a set screw. Carefully pry off the cap and use the appropriate screwdriver or Allen wrench to loosen the set screw. Once loose, pull the handle straight up and off.
  2. เข้าถึงตลับเกม: Remove any decorative trim rings or covers to expose the cartridge housing.
  3. Remove Locking Collar/Nut: The cartridge is usually secured by a threaded collar or nut. This may require channel lock pliers. Turn it counter-clockwise to loosen and remove. Be careful not to damage the threads.
  4. Extract Old Cartridge: Carefully pull the old cartridge straight out. Note its orientation for reference.
  5. ตรวจสอบโอริง: Ensure that all old O-rings (often three connected in a 'Mickey Mouse ears' shape) are removed from the faucet body. If they remain, the new cartridge will not fit correctly. Clean any grit or mineral buildup from the cartridge housing.

4.3. Installing the New Cartridge

  1. หล่อลื่น (ไม่จำเป็น): Apply a small amount of plumber's grease to the O-rings on the new cartridge for easier installation and better sealing.
  2. ใส่ตลับหมึกใหม่: Align the new DA507348N cartridge with the faucet body, ensuring it is seated correctly. Push it firmly into place.
  3. Secure Locking Collar/Nut: Reinstall the locking collar or nut, turning it clockwise to tighten. Do not overtighten, but ensure it is snug.
  4. ประกอบก๊อกน้ำกลับเข้าที่: Replace any decorative trim rings and then the faucet handle. Tighten the set screw to secure the handle.
  5. การฟื้นฟูแหล่งน้ำ: Slowly turn the hot and cold water shut-off valves back on.
  6. ทดสอบก๊อกน้ำ: Check for leaks and verify proper water flow and temperature control.
Genuine Gerber Replacement Parts Logo

Image 2: Genuine Gerber Replacement Parts. This logo signifies the authenticity and quality of Gerber replacement components, ensuring optimal product performance.

5. การบำรุงรักษา

Proper maintenance can extend the life of your faucet and cartridge.

  • การทำความสะอาดปกติ: Periodically clean faucet components, including the cartridge housing, to prevent mineral buildup. Products like CLR (Calcium, Lime, Rust remover) can be used for this purpose.
  • การหล่อลื่น: If the handle operation becomes stiff, disassemble the handle and cartridge, clean the components, and apply fresh plumber's grease to the O-rings and moving parts of the cartridge.
  • ฤดูหนาว: In outdoor faucet applications, ensure the water supply is completely shut off and the faucet is drained during winter months to prevent O-ring damage from freezing.

6 การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Faucet Leaks After Cartridge Replacement
  • Old O-rings still present in faucet body.
  • New cartridge not seated correctly.
  • Cartridge legs slightly too long.
  • Ensure all old O-rings are removed before installing the new cartridge.
  • Re-seat the cartridge, ensuring proper alignment.
  • If cartridge legs are slightly too long, carefully file them down a small amount for a better fit.
No Hot Water (or inconsistent temperature)
  • Hot water supply issue (not cartridge).
  • Cartridge internal defect.
  • Verify hot water supply is working for other fixtures.
  • If issue persists and hot water supply is confirmed, the cartridge may be faulty and require replacement.
Stiff Faucet Handle Operation
  • Lack of lubrication on O-rings.
  • การสะสมของแร่ธาตุ
  • Disassemble, clean components, and apply plumber's grease to O-rings and moving parts.

7. ข้อมูลการรับประกัน

Gerber products, including this ceramic disc cartridge, are typically backed by a limited lifetime warranty against manufacturing defects. For specific terms and conditions, please refer to the warranty documentation provided with your original Danze faucet or contact Gerber customer support.

8. การสนับสนุนลูกค้า

For technical assistance, installation questions, or warranty claims, please contact Gerber customer support. Contact information can typically be found on the official Gerber webไซต์หรือในเอกสารที่รวมอยู่กับผลิตภัณฑ์ของคุณ

You can also visit the official Gerber webเว็บไซต์สำหรับข้อมูลเพิ่มเติม: Gerber Store on Amazon

เอกสารที่เกี่ยวข้อง - DA507348N

พรีview ข้อมูลการรับประกันตลอดอายุการใช้งานของ Gerber Pluming Fixtures Limited
รายละเอียดการรับประกันแบบจำกัดตลอดอายุการใช้งานอย่างเป็นทางการสำหรับผลิตภัณฑ์ Gerber Plumbing Fixtures LLC ครอบคลุมก๊อกน้ำ วาล์ว และอุปกรณ์เสริมสำหรับห้องครัวและห้องน้ำ ศึกษารายละเอียดเกี่ยวกับเงื่อนไขการรับประกัน ข้อยกเว้น และวิธีการขอรับบริการ
พรีview คู่มือการติดตั้งและข้อมูลผลิตภัณฑ์ก๊อกน้ำห้องครัวแบบด้ามจับเดี่ยว Gerber
คู่มือฉบับสมบูรณ์สำหรับก๊อกน้ำห้องครัวแบบด้ามจับเดี่ยวของ Gerber ครอบคลุมผลิตภัณฑ์ตั้งแต่...viewรวมถึงขั้นตอนการติดตั้ง เคล็ดลับการบำรุงรักษา และการแก้ไขปัญหา มีรุ่นต่างๆ ให้เลือกมากมาย เช่น ก๊อกน้ำแบบดึงลงและก๊อกน้ำสำหรับบาร์
พรีview คู่มือการติดตั้งก๊อกน้ำเตรียมอาหารแบบดึงลง Gerber Northerly ที่จับเดี่ยว
คำแนะนำการติดตั้งโดยละเอียดและคู่มือการแก้ไขปัญหาสำหรับก๊อกน้ำเตรียมอาหารแบบดึงลง Gerber Northerly ด้ามจับเดี่ยว เรียนรู้วิธีการติดตั้งและบำรุงรักษาก๊อกน้ำใหม่ของคุณอย่างถูกต้อง
พรีview ข้อมูลการรับประกัน Gerber และคำถามที่พบบ่อย
ข้อมูลโดยละเอียดเกี่ยวกับการรับประกันตลอดอายุการใช้งานแบบจำกัดของ Gerber ความคุ้มครอง และคำถามที่พบบ่อยเกี่ยวกับการซ่อมแซมผลิตภัณฑ์ การเปลี่ยน และการเรียกร้องระหว่างประเทศ
พรีview OMEGA 7.0: Installing Vinyl Printers and Output Devices
Comprehensive guide to installing vinyl printers and output devices for OMEGA 7.0 software, covering local, remote, and network printer setups, including Gerber EDGE and MAXX models.
พรีview คู่มือผู้ใช้และคู่มือการใช้งาน Gerber Dimension 200 Router/Engraver
สำรวจความสามารถของ Gerber Dimension 200 เราเตอร์และเครื่องแกะสลักอันทรงพลังสำหรับป้าย 3 มิติและกราฟิกที่สอดคล้องกับมาตรฐาน ADA คู่มือนี้ครอบคลุมการติดตั้ง การใช้งาน ความปลอดภัย และการบำรุงรักษาระบบ Dimension 200 และ GRAPHIX ADVAN ที่เกี่ยวข้องTAGซอฟต์แวร์ E และ ART Path