อินเท็กซ์ 56998EG

Intex Metal Frame Pool Set (10-Feet x 30-Inch) Instruction Manual

รุ่น: 56998EG

ข้อมูลด้านความปลอดภัยที่สำคัญ

Read, understand, and follow all instructions carefully before installing and using this product. Failure to do so may result in serious injury or property damage. This pool is intended for above-ground use only. Do not set up the pool on a slope or uneven surface.

  • การดูแลผู้ใหญ่: ควรดูแลเด็กและผู้พิการอย่างใกล้ชิดตลอดเวลา
  • ความลึกของน้ำ: The pool has a water depth of 24 inches.
  • ความปลอดภัยทางไฟฟ้า: Ensure all electrical connections, especially for the filter pump, are connected to a Ground-Fault Circuit Interrupter (GFCI) outlet.
  • การจัดการสารเคมี: Handle pool chemicals with care and follow manufacturer's instructions.
  • ห้ามดำน้ำ: ห้ามดำน้ำหรือกระโดดลงไปในสระ

รายการส่วนประกอบ

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact Intex customer support.

  • Pool Liner (1)
  • Horizontal Frame Bars (Quantity as per model)
  • Vertical Frame Legs (Quantity as per model)
  • T-Joint Connectors (Quantity as per model)
  • Filter Pump (1)
  • ไส้กรอง (1)
  • ท่อยางและคลอรีนamps for Filter Pump (Set)
  • ปลั๊กระบาย (1)

คำแนะนำการตั้งค่า

1. การเตรียมสถานที่

Select a firm, level surface for your pool. The area should be free of sharp objects, debris, and excessive vegetation. Consider sun exposure, proximity to a power outlet for the pump, and drainage. A ground cloth or tarp is recommended beneath the pool liner for added protection.

Graphic showing three steps for easy pool setup: lay out pool on level ground, assemble frame, fill pool with water and enjoy.

Image: Visual guide for the three main steps of pool setup: preparing the ground, assembling the frame, and filling the pool.

2. การประกอบสระว่ายน้ำ

  1. Unfold the pool liner and lay it flat on the prepared, level ground. Ensure the drain plug is closed.
  2. Identify the horizontal frame bars and T-joint connectors. The horizontal bars are generally larger in diameter than the vertical legs.
  3. Slide the horizontal bars through the sleeves at the top edge of the pool liner.
  4. Connect the horizontal bars using the T-joint connectors. Start at one end and work your way around the pool. The final T-joint connection may require additional effort due to tension; assistance from another person is recommended.
  5. Insert the vertical support legs into the bottom of each T-joint connector. Ensure they are securely seated and the pool frame is stable.
Intex Metal Frame Pool with blue liner and white frame components assembled, ready for filling.

Image: An assembled Intex Metal Frame Pool, showing the blue liner and white support frame before water is added.

3. การเชื่อมต่อปั๊มกรอง

เชื่อมต่อปั๊มกรองเข้ากับพอร์ตทางเข้าและทางออกที่กำหนดไว้บนแผ่นรองสระว่ายน้ำโดยใช้ท่อและข้อต่อที่ให้มาamps. Ensure all connections are tight to prevent leaks. Before starting the pump, ensure it is filled with water to purge any air.

Close-up of the Intex Krystal Clear Cartridge Filter Pump with hoses connected.

Image: The Krystal Clear Cartridge Filter Pump, illustrating its connection points for the pool hoses.

4. การเติมน้ำในสระ

Begin filling the pool with water. As the water level rises, smooth out any wrinkles in the bottom of the liner by walking gently across the pool floor. Stop filling when the water reaches the recommended fill line, typically just below the top horizontal bar.

คำแนะนำการใช้งาน

1. การทำงานของปั๊มกรอง

The included Krystal Clear™ Cartridge Filter Pump (Model C330) is designed to circulate and filter the pool water. It pumps 330 gallons (1,249 L) per hour. Operate the pump for 2-10 hours daily, depending on usage and water clarity, to maintain optimal filtration. Always ensure the pump is connected to a 110-120 voltage GFCI outlet.

Graphic detailing the features of the Krystal Clear Cartridge Filter Pump C330, including its pumping capacity and easy-to-clean filter cartridge.

Image: Features of the Krystal Clear Cartridge Filter Pump C330, highlighting its flow rate and maintenance benefits.

2. เคมีของน้ำ

Maintaining proper water chemistry is essential for a clean and safe pool. Regularly test your pool water using a DPD test kit for chlorine and pH levels. Adjust chemicals as needed:

  • คลอรีน: Use liquid chlorine (bleach) or stabilized chlorine tablets in a floater. Sunlight breaks down unstabilized chlorine, so stabilizer may be needed.
  • ค่าพีเอช: Use muriatic acid to lower pH or soda ash to raise pH.
  • ตัวกันโคลง: If using unstabilized chlorine, add cyanuric acid (stabilizer) to protect chlorine from UV degradation.

3. Hydro Aeration Technology

This pool features Hydro Aeration Technology, which enhances water quality through:

  • Advanced Circulation: Injecting air into the water accelerates circulation, causing fine particles to cluster for more effective filtration.
  • Improved Clarity: Aeration removes minerals through oxidation, leading to clearer water.
  • Increased Freshness: More negative ions are generated by activating air bubbles, improving overall air quality around the pool.
Graphic illustrating Intex Hydro Aeration Technology with water jets and arrows showing circulation.

Image: Diagram of Hydro Aeration Technology, showing how air injection improves water circulation and filtration.

การซ่อมบำรุง

1. การทำความสะอาดเป็นประจำ

  • การสกิม: Use a pool net to regularly remove leaves, insects, and other debris from the water surface.
  • การดูดฝุ่น: Periodically vacuum the pool bottom to remove settled debris.
  • ไส้กรอง : Clean the filter cartridge regularly by rinsing it with a garden hose. Replace the cartridge every two weeks or when it remains dirty after cleaning.

2. การเตรียมพร้อมสำหรับฤดูหนาว

At the end of the swimming season, properly prepare your pool for winter storage to prolong its lifespan:

  • ระบายน้ำออกจากสระจนหมด
  • Clean and dry the pool liner and all frame components thoroughly.
  • ถอดชิ้นส่วนโครงทั้งหมดออก และเก็บไว้ในที่แห้งและปลอดภัย ห่างจากอุณหภูมิที่สูงหรือต่ำเกินไป
  • Store the filter pump indoors in a dry, temperature-controlled environment.

การแก้ไขปัญหา

This section addresses common issues you might encounter with your Intex Metal Frame Pool.

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
น้ำขุ่นInsufficient filtration, improper chemical balance, high organic loadRun filter pump longer, backwash/clean filter, test and adjust chemicals (chlorine, pH), shock treat pool.
ปั๊มไม่ทำงานPower issue, clogged impeller, airlockCheck GFCI outlet, ensure power is connected, clean impeller, prime pump to remove air.
น้ำรั่วจากการเชื่อมต่อหลวมclamps, worn O-rings, damaged hosesขันท่อยางให้แน่นampตรวจสอบและเปลี่ยนโอริง/ปะเก็น เปลี่ยนท่อที่ชำรุด
ความเสียหายของแผ่นบุสระว่ายน้ำPuncture, tearUse an Intex repair patch kit to fix small holes. For large tears, contact customer support.

ข้อมูลจำเพาะ

An Intex Metal Frame Pool with three people enjoying the water, set up on a green lawn.

Image: The Intex Metal Frame Pool in use, illustrating its size and design.

Graphic illustrating the 3-Ply Durable Material construction of the pool liner, showing layers for strength and puncture resistance.

ภาพ: รายละเอียด view of the 3-Ply Durable Material, emphasizing its robust construction.

  • แบบอย่าง: 56998อีจี
  • ประเภทสระว่ายน้ำ: Metal Frame Above Ground Pool
  • รูปร่าง: กลม
  • ขนาด : 10-Feet (Diameter) x 30-Inch (Height) / 120"L x 120"W x 30"H
  • ความจุน้ำ (90%): 1,185 แกลลอน (4,485 ลิตร)
  • ความลึกของน้ำ: ประมาณ 24 นิ้ว (60.96 ซม.)
  • วัสดุ: Durable 3-Ply PVC and Metal Frame
  • ส่วนประกอบที่รวมอยู่: Filter Pump (Krystal Clear C330)
  • อัตราการไหลของปั๊มกรอง: 330 แกลลอนต่อชั่วโมง (1,249 ลิตรต่อชั่วโมง)
  • จำเป็นต้องประกอบ: ใช่
  • น้ำหนักสินค้า: 44.66 ปอนด์ (20.25 กก.)

ข้อมูลการรับประกัน

This Intex Metal Frame Pool Set comes with a รับประกันจำกัด 90 วัน. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, refer to the documentation included with your product or visit the official Intex webเว็บไซต์.

การสนับสนุนลูกค้า

For further assistance, missing parts, or technical support, please contact Intex customer service. Contact information can typically be found in the product packaging or on the official Intex webเว็บไซต์.