Cherub WMT-555C

คู่มือการใช้งานเครื่องตั้งสายและเครื่องจับจังหวะ Cherub WMT-555C พร้อมปิ๊กอัพ

Model: WMT-555C | Brand: Cherub

การแนะนำ

The Cherub WMT-555C is a versatile electronic device designed for musicians, combining a chromatic tuner and a digital metronome into a single, portable unit. It is suitable for a wide range of instruments, including guitars and orchestral instruments, and features a clip-on pickup for accurate acoustic instrument tuning.

This manual provides detailed instructions for the setup, operation, and maintenance of your WMT-555C to ensure optimal performance and longevity.

สินค้าเกินview

Cherub WMT-555C Tuner and Metronome with Pickup, showing the device and its clip-on pickup cable.

Image: Cherub WMT-555C Tuner and Metronome with Pickup. The device features a large LCD screen, control buttons, a speaker, and input jacks. Below it is the clip-on pickup with a 1/4" jack.

The WMT-555C unit includes:

Key Controls and Display Elements (Refer to image above):

การตั้งค่า

1. การติดตั้งแบตเตอรี่

The WMT-555C requires 1 AAA battery for operation. Ensure the battery is inserted with the correct polarity as indicated inside the battery compartment. A fresh alkaline battery is recommended for optimal performance and battery life.

2. การเปิด/ปิดเครื่อง

กดปุ่ม เปิด / ปิด button to power the unit on. Press and hold the เปิด / ปิด button again to power it off.

3. Connecting the Pickup (Optional)

For tuning acoustic instruments, connect the provided clip-on pickup to the ป้อนข้อมูล jack on the side of the unit. Attach the clip securely to your instrument, typically near the bridge or soundboard, to best capture vibrations.

คำแนะนำการใช้งาน

โหมดจูนเนอร์

  1. Select Tuner Mode: กดปุ่ม โหมด button until "Tuner" is displayed on the screen.
  2. วิธีการป้อนข้อมูล:
    • ไมโครโฟนภายใน: For acoustic instruments, ensure no cable is plugged into the INPUT jack. The built-in MIC will detect sound.
    • Pickup/Instrument Cable: Plug the clip-on pickup or your instrument's 1/4" cable into the ป้อนข้อมูล แจ็ค.
  3. ปรับแต่งเครื่องดนตรีของคุณ: Play a single note on your instrument. The display will show the detected note and indicate whether it is sharp, flat, or in tune. Adjust your instrument's tuning pegs until the display indicates the note is in tune.
  4. การเลือกคีย์: The tuner supports chromatic tuning in 4 keys: C, F, B♭, and E♭. Use the รายการ button to cycle through these key options if needed.
  5. Pitch Calibration: The reference pitch can be calibrated from 435Hz to 445Hz. Use the ขว้าง buttons to adjust the A4 reference frequency. The default is typically 440Hz.
  6. เครื่องกำเนิดเสียง: กดปุ่ม เสียง button to activate the built-in tone generator, which produces a reference tone for manual tuning.

โหมดเมโทรนอม

  1. Select Metronome Mode: กดปุ่ม โหมด button until "Metronome" is displayed on the screen.
  2. ปรับจังหวะ: ใช้ จังหวะ buttons (Up/Down) to set the desired beats per minute (BPM). The range is 30-230 BPM.
  3. Set Time Signature: กดปุ่ม รายการ button to select the time signature setting. Use the ค่า buttons to choose from available time signatures: -/4 (0), 1/4, 2/4, 3/4, 4/4, 3/8, 6/8.
  4. เลือกจังหวะ: กดปุ่ม ตี button to cycle through various rhythm patterns (e.g., quarter notes, eighth notes, triplets).
  5. Start/Stop Metronome: กดปุ่ม PLAY Metronome button to start the metronome click. Press it again to stop.
  6. ปรับระดับเสียง: ใช้ เล่มที่ slider to adjust the metronome's output volume.

การซ่อมบำรุง

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
เครื่องไม่เปิดแบตเตอรี่เสียหรือติดตั้งไม่ถูกต้องใส่แบตเตอรี่ AAA กลับเข้าไป โดยตรวจสอบให้แน่ใจว่าขั้วถูกต้อง
Tuner is not detecting sound.Incorrect input method selected; low instrument volume; faulty pickup/cable.Ensure pickup is securely connected or use the built-in MIC. Increase instrument volume. Check pickup/cable for damage.
Metronome sound is too quiet.Volume slider set too low; speaker obstruction.ปรับแต่ง เล่มที่ slider to increase output. Ensure the speaker grille is clear. Consider using headphones.
Tuner response is slow.Weak signal from instrument; noisy environment.Ensure a clear, sustained note is played. Use the clip-on pickup in noisy environments.

ข้อมูลจำเพาะ

เอกสารที่เกี่ยวข้อง - WMT-555C

พรีview คู่มือผู้ใช้ Cherub WMT-565C String Instrument Mate: จูนเนอร์ เครื่องวัดจังหวะ และเครื่องตรวจสอบความชื้น/อุณหภูมิ
คู่มือผู้ใช้โดยละเอียดสำหรับ Cherub WMT-565C ซึ่งเป็นอุปกรณ์เสริมเครื่องดนตรีอเนกประสงค์ เรียนรู้เกี่ยวกับจูนเนอร์ เครื่องตีจังหวะ เซ็นเซอร์วัดอุณหภูมิ/ความชื้น และคุณสมบัติอื่นๆ
พรีview คู่มือผู้ใช้ Cherub WMT-248 Portable Metro-Tuner
คู่มือผู้ใช้แบบครอบคลุมสำหรับ Cherub WMT-248 Portable Metro-Tuner ซึ่งมีรายละเอียดเกี่ยวกับคุณลักษณะ การทำงาน ข้อมูลจำเพาะ และการบำรุงรักษา
พรีview Cherub WMT-565C String Instrument Mate: คู่มือผู้ใช้และคำแนะนำ
คู่มือผู้ใช้ฉบับสมบูรณ์สำหรับ Cherub WMT-565C เครื่องสายคู่หู ซึ่งประกอบด้วยจูนเนอร์ เครื่องตีจังหวะ เครื่องวัดอุณหภูมิ และเครื่องวัดความชื้น เรียนรู้เกี่ยวกับคุณสมบัติ การใช้งาน ข้อมูลจำเพาะ และข้อควรระวัง
พรีview คู่มือผู้ใช้เครื่องรับสัญญาณแบบหนีบโลหะ Cherub WST-905Li
คู่มือผู้ใช้อย่างเป็นทางการสำหรับเครื่องจูนเนอร์แบบหนีบ Cherub WST-905Li เรียนรู้เกี่ยวกับคุณสมบัติ การทำงาน การปรับค่าชดเชยกีตาร์ ข้อมูลจำเพาะ และการปฏิบัติตามมาตรฐาน FCC
พรีview คู่มือผู้ใช้เครื่องรับสัญญาณวิทยุแบบชาร์จไฟได้ Cherub WST-680 พร้อมระบบเปิดอัตโนมัติ
คู่มือการใช้งานฉบับสมบูรณ์สำหรับเครื่องรับสัญญาณวิทยุแบบชาร์จไฟได้ Cherub WST-680 ที่เปิดอัตโนมัติ อธิบายรายละเอียดคุณสมบัติ การใช้งาน ข้อมูลจำเพาะ และข้อควรระวัง
พรีview คู่มือผู้ใช้ Cherub Auto-On Clip WST-645
คู่มือผู้ใช้สำหรับ Cherub Auto-On Clip WST-645 เครื่องจูนเนอร์อิเล็กทรอนิกส์แบบหนีบที่ชาร์จไฟได้สำหรับกีตาร์ เบส และอูคูเลเล่ ซึ่งมีฟังก์ชันเปิดอัตโนมัติ การปรับจูนแบบชดเชย และการชาร์จ USB-C