Altronix NETWAY3012

Altronix NETWAY3012 MidSpan Adapter User Manual

Model: NETWAY3012

1. บทนำ

The Altronix NETWAY3012 is a 12VDC/30W NetWay midspan adapter designed to provide power and data over a single Ethernet cable to IP cameras and other compatible devices. This manual provides essential information for the proper installation, operation, and maintenance of your NETWAY3012 adapter.

This product is UL/cUL Listed (UL60950-1), ensuring compliance with safety standards for information technology equipment.

2. สินค้าหมดview

Altronix NETWAY3012 MidSpan Adapter

Figure 1: Altronix NETWAY3012 MidSpan Adapter. This image shows the compact black enclosure of the adapter with its label on top, displaying "Altronix Netway Netway3012 Adapter" and a CE mark. The front panel features two Ethernet ports (RJ45) and a terminal block for power connections, along with a small red switch or indicator.

The NETWAY3012 is a compact device that facilitates Power over Ethernet (PoE) functionality, allowing for simplified cabling in network installations. It acts as an intermediary device, injecting power into an Ethernet cable to power remote devices without the need for separate power outlets at the device location.

3. การตั้งค่าและการติดตั้ง

Before installation, ensure all power sources are disconnected. Refer to local electrical codes and regulations for proper installation procedures.

  1. การติดตั้ง: Position the NETWAY3012 in a secure, dry location, away from direct sunlight and excessive heat. Ensure adequate ventilation.
  2. การเชื่อมต่อไฟฟ้า: Connect a 12VDC power source to the designated power input terminals on the adapter. Observe correct polarity (+/-). The adapter requires a 12VDC input to deliver power to the connected PoE device.
  3. Data Input (LAN): Connect an Ethernet cable from your network switch or router to the "LAN IN" port on the NETWAY3012 adapter. This port receives data from your network.
  4. PoE Output (PoE OUT): Connect an Ethernet cable from the "PoE OUT" port on the NETWAY3012 adapter to your PoE-compatible device (e.g., IP camera, VoIP phone, wireless access point). This cable will carry both data and power to the device.
  5. เปิดเครื่อง: Once all connections are secure, connect the 12VDC power source to the adapter. Observe any indicator lights for proper operation.

บันทึก: Ensure the connected device is compatible with the 12VDC/30W power output provided by the NETWAY3012 to prevent damage.

4. คู่มือการใช้งาน

The Altronix NETWAY3012 operates automatically once properly connected and powered. It functions as a midspan Power over Ethernet injector.

  • การจ่ายพลังงาน: The adapter injects 12VDC power into the Ethernet cable connected to the "PoE OUT" port, allowing the connected PoE device to receive power directly through the network cable.
  • Data Passthrough: Network data from the "LAN IN" port is passed through to the "PoE OUT" port without modification, ensuring seamless network communication.
  • ตัวบ่งชี้สถานะ: (If applicable, refer to device for specific LED indicators) Typically, a power LED indicates the unit is receiving input power, and link/activity LEDs on the Ethernet ports indicate data connection and traffic.

No user configuration is typically required for the basic operation of this midspan adapter.

5. การบำรุงรักษา

The NETWAY3012 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:

  • การทำความสะอาด: ถอดปลั๊กไฟก่อนทำความสะอาด ใช้ผ้าแห้งนุ่มเช็ดทำความสะอาดภายนอก ห้ามใช้น้ำยาทำความสะอาดหรือสเปรย์กระป๋อง
  • การระบายอากาศ : Ensure that the adapter's ventilation openings (if any) are not blocked to prevent overheating.
  • สภาพแวดล้อม : Operate the device within its specified temperature and humidity ranges. Avoid extreme temperatures and high moisture environments.
  • ความสมบูรณ์ของสายเคเบิล: Periodically inspect all connected cables for damage or wear. Replace damaged cables immediately.

6 การแก้ไขปัญหา

If you encounter issues with your NETWAY3012 adapter, refer to the following common troubleshooting steps:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
No power to connected device.
  • No input power to NETWAY3012.
  • ปริมาตรของแหล่งจ่ายไฟไม่ถูกต้องtagอี/กระแส
  • สายอีเธอร์เน็ตชำรุด
  • Connected device is not PoE compatible or requires more power than 30W.
  • Verify 12VDC power supply is connected and functional.
  • Ensure power supply meets 12VDC and sufficient current requirements.
  • Test Ethernet cable or try a different one.
  • Check device specifications for PoE compatibility and power requirements.
ไม่มีการเชื่อมต่อข้อมูล
  • สายอีเธอร์เน็ตชำรุด
  • Incorrect port connection (LAN IN vs. PoE OUT).
  • Network issue upstream.
  • Test Ethernet cables.
  • Ensure LAN IN is connected to network source and PoE OUT to device.
  • Verify network connectivity from your switch/router.
Device intermittently loses power/connection.
  • การเชื่อมต่อสายเคเบิลหลวม
  • ความร้อนสูงเกินไป
  • Power supply instability.
  • ยึดสายเคเบิลทั้งหมดให้แน่นสนิท
  • Ensure proper ventilation around the adapter.
  • Test power supply or try a different one.

If the problem persists after attempting these solutions, contact Altronix technical support.

7. ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
แบบอย่างNETWAY3012
ยี่ห้ออัลโทรนิกซ์
กำลังขับ12โวลต์/30วัตต์
แหล่งพลังงานCorded Electric (requires external 12VDC input)
ขนาด (กxยxส)2.52 x 3.82 x 0.98 นิ้ว
น้ำหนักสินค้า3.3 ปอนด์
การรับรองUL/cUL Listed (UL60950-1)
วันที่พร้อมใช้งานครั้งแรกวันที่ 13 สิงหาคม 2009

8. ข้อมูลการรับประกัน

Altronix products are typically covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Altronix webไซต์นี้ โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ยืนยันการรับประกัน

9. การสนับสนุนด้านเทคนิค

For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact Altronix technical support directly. Contact information can usually be found on the Altronix official webไซต์หรือบนบรรจุภัณฑ์ผลิตภัณฑ์

อัลโทรนิกซ์ Webเว็บไซต์: www.altronix.com

เอกสารที่เกี่ยวข้อง - NETWAY3012

พรีview คู่มือการติดตั้ง Altronix NetWay8/NetWay16 PoE Midspan
คู่มือการติดตั้ง Altronix NetWay8 และ NetWay16 PoE Midspan Injectors ซึ่งมีรายละเอียดการตั้งค่า ข้อมูลจำเพาะ และการแก้ไขปัญหาสำหรับการจ่ายไฟให้กับอุปกรณ์เครือข่าย
พรีview NetWay3012P PoE+ Adapter/Converter Installation Guide
Installation guide for the Altronix NetWay3012P, a PoE+ adapter and converter that passes PoE/PoE+ and converts it to 12VDC up to 2A for non-PoE compliant IP devices. Includes specifications, installation steps, and compatibility information.
พรีview คู่มือการติดตั้ง Altronix NetWaySP8 Series - สวิตช์ PoE+ เสริมความแข็งแกร่งผ่าน Ethernet บนไฟเบอร์
คู่มือการติดตั้งสวิตช์ PoE+ แบบ Ethernet over Fiber 8 พอร์ต Altronix NetWaySP8 Series ครอบคลุมคุณสมบัติ การติดตั้ง การกำหนดค่า และข้อมูลจำเพาะทางเทคนิคสำหรับรุ่นต่างๆ เช่น NetWaySP8WP, NetWaySP8X และอื่นๆ
พรีview ผลิตภัณฑ์เด่นของ Altronix: โซลูชันพลังงานและการส่งข้อมูล
สำรวจผลิตภัณฑ์แหล่งจ่ายไฟ เครื่องขยายเครือข่าย โซลูชันการควบคุมการเข้าถึง และระบบการสื่อสารที่ครอบคลุมของ Altronix ที่ออกแบบมาเพื่อความปลอดภัย การเฝ้าระวัง และโครงสร้างพื้นฐานที่สำคัญ
พรีview แค็ตตาล็อกโซลูชันพลังงานของ Altronix: UPS, PoE, ระบบป้องกันไฟกระชาก และอื่นๆ
สำรวจแคตตาล็อก Altronix ที่ครอบคลุม ซึ่งมีอุปกรณ์จ่ายไฟ ระบบ UPS มิดสแปน PoE อุปกรณ์ป้องกันไฟกระชาก แบตเตอรี่ และอุปกรณ์เสริมสำหรับกล้องวงจรปิด ระบบควบคุมการเข้า-ออก และโครงสร้างพื้นฐานเครือข่าย ค้นหาข้อมูลจำเพาะและโซลูชันผลิตภัณฑ์โดยละเอียด
พรีview ตัวตั้งเวลาควบคุมประตู Altronix DL1: ข้อมูลจำเพาะและคู่มือการติดตั้ง
ข้อมูลจำเพาะโดยละเอียดและคำแนะนำในการติดตั้งสำหรับ Altronix DL1 Door Control Timer ซึ่งมีการกำหนดเวลาที่ปรับได้ เอาต์พุตรีเลย์ และระดับเสียงที่หลากหลายtagอี การดำเนินการ