คู่มือการใช้งานตัวกรอง HEPA Dirt Devil Swivel Glide Vision รุ่น 2690299700

การแนะนำ

This manual provides instructions for the installation, operation, and maintenance of the Dirt Devil Swivel Glide Vision HEPA Filter, model 2690299700. This filter is designed for use with Dirt Devil Vision 086900 and 086910 model vacuum cleaners.

สินค้าเกินview

The Dirt Devil Swivel Glide Vision HEPA Filter is a crucial component for maintaining the air filtration performance of your compatible vacuum cleaner. It captures fine dust and allergens, contributing to cleaner exhaust air.

A cylindrical pleated HEPA filter with black plastic top and bottom caps, featuring an angled opening at the top for insertion into the vacuum's dirt cup.

คำแนะนำในการติดตั้ง

Follow these steps to install the HEPA filter:

1. Locate the dirt cup on your Dirt Devil Vision 086900 or 086910 vacuum cleaner.
2. Remove the dirt cup from the vacuum according to your vacuum cleaner's specific instructions.
3. Open the dirt cup and carefully remove the old filter. Dispose of the old filter responsibly.
4. Insert the new Dirt Devil Swivel Glide Vision HEPA Filter (model 2690299700) into the designated filter slot within the dirt cup. Ensure the slanted top aligns correctly and the filter is securely seated.
5. Close the dirt cup and reattach it to the vacuum cleaner.

การดำเนินการ

Once installed, the HEPA filter operates automatically as part of your vacuum cleaner's filtration system. It is designed to capture microscopic particles, including dust mites, pet dander, and pollen, as air passes through it during vacuuming.

For optimal performance, ensure the filter is correctly installed before each use.

การบำรุงรักษาและการทำความสะอาด

Regular maintenance of your HEPA filter is essential for maintaining vacuum performance and air quality. This filter is reusable.

1. ความถี่: Inspect the filter regularly, ideally after every 1-3 uses, or when you notice a decrease in suction power.
2. การถอดออก: Follow the installation steps to remove the filter from the dirt cup.
3. การทำความสะอาด:
   • Gently tap the filter over a waste bin to dislodge loose dirt and debris.
   • If necessary, rinse the pleated filter material under cool, running water. ห้ามใช้น้ำร้อนหรือผงซักฟอก
   • Allow the filter to air dry completely for at least 24 hours before reinstalling. Do not use heat to dry the filter, as this can damage the HEPA material.
4. การติดตั้งใหม่: Once completely dry, reinstall the filter into the dirt cup as described in the Installation section.

สำคัญ: Never operate the vacuum cleaner without the HEPA filter installed, as this can damage the motor and reduce filtration effectiveness. Replace the filter if it shows signs of damage, such as tears or excessive wear, or if cleaning no longer restores suction power.

การแก้ไขปัญหา

ลดพลังดูด

• Filter Clogged: Remove and clean the HEPA filter as described in the Maintenance section. Ensure it is completely dry before reinstallation.
• การติดตั้งไม่ถูกต้อง: Verify that the filter is correctly seated and the dirt cup is securely closed.
• Other Clogs: Check other parts of the vacuum, such as the hose, brush roll, and dirt cup, for blockages.

ข้อมูลจำเพาะผลิตภัณฑ์

ข้อมูลการรับประกัน

No specific warranty information is provided with this product. Please refer to the original vacuum cleaner's warranty documentation or contact Dirt Devil customer support for details regarding compatible parts.

สนับสนุน

For further assistance or inquiries regarding your Dirt Devil vacuum cleaner or replacement parts, please visit the official Dirt Devil webเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าของพวกเขา

Visit the Dirt Devil Store on Amazon