1. บทนำ
The Ranco ETC-112000 is a single-stage electronic temperature control designed for precise temperature management in various applications. This device features a digital display and a user-friendly keypad for easy setup and adjustment of temperature settings. It is equipped with diagnostic capabilities and a remote temperature sensing feature, making it a versatile solution for maintaining desired temperature conditions.
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Ranco ETC-112000 temperature control.
2. คุณสมบัติหลัก
- Digital Display and Keypad: Allows for easy programming and constant readout of sensor temperature.
- การตั้งค่าที่ปรับได้: Setpoint temperature, differential, and mode of operation (heating or cooling) are user-selectable.
- Remote Temperature Sensing: Capable of sensing temperatures up to 400 feet away using standard 22 gauge sensor wire.
- Built-In Diagnostics: Features diagnostic programs to identify hardware, software, or system issues with error code display.
- Keyword Lockout: An internal switch prevents unauthorized tampering with control settings.
- ผู้ประกาศ: Liquid crystal display indicators show when the relay is energized.
3. ข้อมูลด้านความปลอดภัย
Please read and understand all safety instructions before installing or operating the Ranco ETC-112000. Failure to follow these instructions may result in property damage, personal injury, or death.
- อันตรายจากไฟฟ้า: Ensure power is disconnected before performing any installation, wiring, or maintenance. Only qualified personnel should perform electrical work.
- เล่มที่tage: This device requires a 24 VAC input. Verify your power source matches this requirement.
- สภาพแวดล้อม : Do not expose the control to conditions outside its specified operating and storage ambient temperatures or humidity ranges.
- เอกสารแนบ: The NEMA 1 enclosure provides basic protection. Ensure it is installed in an appropriate environment.
4. การตั้งค่าและการติดตั้ง
The ETC-112000 is designed for straightforward installation. Follow these steps carefully:
- การติดตั้ง: Securely mount the control unit in a suitable location, ensuring it is within the specified ambient temperature and humidity ranges. The enclosure dimensions are 6.52" high x 2.7" wide x 2.48" deep.
- การเดินสายไฟ: Connect the 24 VAC input power to the designated terminals on the control unit. Refer to the wiring diagram (typically found inside the control's cover or in a separate wiring guide) for correct connections. Ensure power is OFF before wiring.
- การติดตั้งเซนเซอร์: Connect the thermistor sensor to the control. The sensor is 2" long x 1/4" diameter with an 8' cable. It can be extended up to 400 feet using standard 22 gauge sensor wire. Position the sensor in the area where temperature measurement is required.
- สายไฟโหลด: Connect the device(s) to be controlled (e.g., heater, cooler) to the SPDT relay output terminals. Ensure the load's power requirements are within the control's relay specifications.
- เปิดเครื่อง: Once all connections are secure and verified, restore power to the unit. The digital display should illuminate.
Figure 1: Ranco ETC-112000 Single Stage Temperature Control unit with attached thermistor sensor. The unit features a digital display and control buttons on the front panel.
5. คู่มือการใช้งาน
The ETC-112000 features a digital display and a keypad for easy operation. When not in programming mode, the display shows the current sensor temperature. Annunciators on the LCD indicate when the relay is active.
5.1. Display Readout
The primary display shows the real-time temperature measured by the sensor. Look for indicators on the display that signal the status of the control relay (e.g., heating or cooling active).
5.2. ฟังก์ชั่นปุ่มกด
The keypad allows access to programming parameters. Typically, there are buttons for navigating menus, increasinกรัม/ลดลงasing values, and confirming selections. Refer to the specific button labels on your unit for exact functions.
6. การตั้งค่าการเขียนโปรแกรม
To adjust the control's operational parameters, use the keypad to enter programming mode. The ETC-112000 allows adjustment of the setpoint temperature, differential, and mode of operation (heating or cooling).
6.1. Setting Temperature Setpoint
- Enter programming mode (consult your unit's specific button sequence, often a 'SET' or 'PROG' button).
- Navigate to the setpoint temperature parameter.
- Adjust the value using the up/down arrows. The range is 30 to 220 Degrees F.
- ยืนยันการตั้งค่า
6.2. Setting Differential
- In programming mode, navigate to the differential parameter.
- Adjust the value using the up/down arrows. The range is 1 to 30 Degrees F.
- Confirm the setting. The differential prevents rapid cycling of the controlled device.
6.3. Selecting Mode of Operation (Heating or Cooling)
- Access the mode selection parameter in programming mode.
- Choose between 'Heating' or 'Cooling' based on your application.
- ยืนยันการเลือกของคุณ
6.4. Keyword Lockout Switch
To prevent unauthorized changes to settings, the ETC-112000 includes a keyword lockout switch located inside the enclosure. Activating this switch disables the keypad functions. To enable keypad access, deactivate the switch.
7. การบำรุงรักษา
The Ranco ETC-112000 is designed for reliable operation with minimal maintenance. Regular inspection and cleaning can help ensure its longevity and accuracy.
- การทำความสะอาด: Periodically clean the exterior of the control unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- การตรวจสอบเซ็นเซอร์: Ensure the temperature sensor is free from debris and properly positioned. Check the sensor cable for any signs of damage.
- การเชื่อมต่อ: Occasionally verify that all electrical connections are secure and free from corrosion.
8 การแก้ไขปัญหา
The ETC-112000 is equipped with diagnostic programs to help identify and display issues. If a problem occurs, the unit will display an error code.
8.1. รหัสข้อผิดพลาด
The control displays different error codes to indicate specific problems related to hardware, software, or the system. Consult the following table for common error codes and their resolutions:
| รหัสข้อผิดพลาด | คำอธิบาย | วิธีแก้ปัญหาที่เป็นไปได้ |
|---|---|---|
| (Specific error codes not provided in source data) | Indicates a general system fault or sensor issue. | Check sensor connections. Power cycle the unit. If the error persists, contact Ranco support. |
| No Display / Unit Not Powering On | The unit is not receiving power or has an internal fault. | Verify 24 VAC power supply. Check wiring connections. Ensure circuit breaker is not tripped. |
| การอ่านอุณหภูมิไม่ถูกต้อง | Sensor is faulty or improperly installed. | Inspect sensor for damage. Ensure sensor is correctly connected and positioned. |
For specific error code definitions and advanced troubleshooting, refer to the full technical documentation or contact Ranco customer support.
9. ข้อมูลจำเพาะ
| พารามิเตอร์ | ค่า |
|---|---|
| แบบอย่าง | อีทีซี-112000 |
| ช่วงจุดตั้งค่าอุณหภูมิ | 30 ถึง 220 องศา F |
| Differential Range | 1 ถึง 30 องศา F |
| ข้อกำหนดด้านพลังงานอินพุต | 24 โวลต์ |
| ประเภทเซนเซอร์ | Thermistor, 2" long x 1/4" Diameter, with 8' cable |
| Remote Sensing Capability | Up to 400 feet with 22 gauge sensor wire |
| อุณหภูมิแวดล้อมในการทำงาน | 20 ถึง 140 องศา F |
| อุณหภูมิแวดล้อมในการจัดเก็บ | 40 ถึง 176 องศา F |
| ความชื้นโดยรอบ | 0 ถึง 95% RH ไม่กลั่นตัว |
| ประเภทตู้ปิด | NEMA 1 |
| ขนาด (สูง x กว้าง x ลึก) | 6.52" x 2.7" x 2.48" |
| การอนุมัติของหน่วยงาน | ได้รับการรับรองจาก UL และ CSA |
| สลับการกระทำ | SPDT (ขั้วเดี่ยวสองขั้ว) |
| ประเภทจอภาพ | จอแอลซีดี |
10. การรับประกันและการสนับสนุน
Information regarding the specific warranty terms for the Ranco ETC-112000 was not provided in the product data. For warranty details, technical support, or service inquiries, please contact Ranco directly or refer to the documentation included with your purchase.
แนะนำให้เก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อเพื่อใช้ในการเคลมประกัน
