คู่มือการใช้งานเครื่องวัดระดับเลเซอร์ BOSCH GTL2

1. สินค้าหมดview

The Bosch GTL2 Laser Level Square is designed to project precise horizontal and vertical laser lines, creating a 90-degree angle for various layout tasks. It offers an accuracy of up to +/-1/2 inch at 30 feet, making it suitable for applications such as tiling, cabinet installation, and picture hanging. The tool features built-in bubble vials for traditional leveling and an alignment guide for setting angles in 5-degree increments.

คุณสมบัติหลัก:

• Versatile Laser Projection: Projects horizontal and vertical chalk lines at 90 degrees, extending up to 30 feet with +/-1/2 inch accuracy.
• การมองเห็นสูง: Bright, sharp laser lines for clear visibility in various indoor lighting conditions.
• การใช้งานที่เป็นมิตรกับผู้ใช้: Simple one-button control for activating the two perpendicular laser lines.
• การติดตั้งที่ปลอดภัย: Includes non-abrasive adhesive strips for temporary, fixed attachment to smooth surfaces.
• Integrated Level Vials: Features built-in bubble levels for precise manual leveling and alignment.
• Angle Alignment Guide: Allows for calculating and turning angles in 5-degree increments for specialized layouts.
• คลาสเลเซอร์: Class IIM Laser, 650 nm; <1 mW.

2. การตั้งค่า

2.1 การติดตั้งแบตเตอรี่

The BOSCH GTL2 requires three (3) AA batteries for operation. To install or replace batteries:

1. หาช่องใส่แบตเตอรี่ที่อยู่ด้านล่างของตัวเครื่อง
2. เลื่อนฝาครอบช่องใส่แบตเตอรี่เปิดออก
3. Insert three AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. ปิดฝาช่องใส่แบตเตอรี่ให้แน่น

2.2 Attaching Adhesive Mounting Strips

For temporary, fixed attachment to smooth surfaces, use the provided non-abrasive adhesive mounting strips. These strips are designed to secure the tool without damaging the surface.

1. Identify the circular recesses on the underside of the tool.
2. Apply the adhesive strips to these recesses.
3. To activate the adhesive for mounting, press the two side buttons on the tool. This action extends the adhesive pads, allowing them to grip the surface.

3. คู่มือการใช้งาน

3.1 การเปิด/ปิดเครื่อง

To power on the BOSCH GTL2 and activate the laser lines, press the red power button located at the center top of the unit. Press the button again to power off the device.

3.2 Projecting Laser Lines

Once powered on, the GTL2 will project two perpendicular laser lines (90 degrees) onto the surface. These lines serve as visual guides for alignment and squaring.

3.3 Using Built-in Level Vials

The GTL2 includes two integrated bubble vials for traditional leveling. Before relying on the laser lines for critical alignment, ensure the tool itself is level by observing the bubbles in the vials. Adjust the tool's position until the bubbles are centered.

3.4 Angle Alignment Guide

The base of the tool features an alignment guide that allows for calculating and turning angles in 5-degree increments. This is useful for creating diagonal patterns or aligning objects at specific angles.

3.5 การใช้งานทั่วไป

• การปูกระเบื้อง: Use the 90-degree laser lines to lay out floor or wall tiles accurately.
• การติดตั้งบนผนัง: Ensure pictures, shelves, or cabinets are perfectly level and aligned.
• การตัดแต่งและการปั้น: Project straight lines for installing baseboards, crown molding, or other decorative trim.
• Wallpaper Installation: Create precise vertical and horizontal guides for hanging wallpaper.

4. การบำรุงรักษา

To ensure optimal performance and longevity of your BOSCH GTL2 Laser Level Square, follow these general maintenance guidelines:

• การทำความสะอาด: Keep the laser apertures and the tool's exterior clean. Use a soft, dry cloth. Avoid abrasive cleaners or solvents.
• พื้นที่จัดเก็บ: Store the tool in a dry, cool place, away from direct sunlight and extreme temperatures. Remove batteries if the tool will not be used for an extended period.
• การจัดการ: Handle the tool with care to prevent damage to the laser components or level vials.

5 การแก้ไขปัญหา

If you encounter issues with your BOSCH GTL2, consider the following common troubleshooting steps:

• No Laser Lines: Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary. Ensure the power button is pressed firmly.
• Faint Laser Lines: In brightly lit environments, laser lines may appear fainter. Try to reduce ambient light if possible. Ensure the laser apertures are clean.
• เส้นที่ไม่ถูกต้อง: Verify that the tool is placed on a stable, level surface. Use the built-in bubble vials to confirm the tool's levelness.

For further assistance, refer to the warranty and support information provided in this manual.

6. ข้อมูลจำเพาะ

7. การรับประกันและการสนับสนุน

Bosch measuring and layout tools, including the GTL2, are covered by a one-year limited warranty. An additional year of coverage is available when you register your tool within eight weeks of purchase.

For detailed terms and conditions, or to register your tool, please visit rb-pt.io/การรับประกันเครื่องมือไฟฟ้า หรือโทร 1-877-BOSCH99