คุณบีม MB720

คู่มือผู้ใช้ไฟกลางคืนไร้สายตรวจจับความเคลื่อนไหว Mr Beams MB720

แบบ: MB720

1. บทนำ

Thank you for choosing the Mr Beams MB720 Wireless Motion Sensing Nightlight. This manual provides important information regarding the installation, operation, and maintenance of your new nightlight. Please read it thoroughly before use and retain it for future reference.

สินค้าเกินview

The Mr Beams MB720 is a highly efficient, battery-powered LED nightlight designed for automatic illumination in various indoor and outdoor settings. It features a motion sensor that activates the light only when motion is detected in darkness, conserving battery life. Its weatherproof design allows for versatile placement.

เนื้อหาแพ็คเกจ

  • Mr Beams MB720 Nightlight(s)
  • Mounting Hardware & Anchors
  • แถบกาว
  • คู่มือการใช้งาน (เอกสารนี้)
Three Mr Beams MB720 nightlights, showing their compact, square design with a motion sensor at the top and a diffused light panel below.

Figure 1: Mr Beams MB720 Wireless Motion Sensing Nightlights (3-Pack shown).

2. การตั้งค่าและการติดตั้ง

2.1 การติดตั้งแบตเตอรี่

  1. Locate the battery compartment cover on the back of the nightlight.
  2. Remove the cover by sliding or unscrewing it (refer to the diagram on the device if unsure).
  3. Insert the required number of AA batteries (not included), ensuring correct polarity (+/-) as indicated inside the compartment.
  4. ใส่ฝาปิดช่องใส่แบตเตอรี่กลับเข้าที่อย่างแน่นหนา

2.2 ตัวเลือกการติดตั้ง

The MB720 nightlight offers flexible mounting options:

Adhesive Mounting (Temporary/Non-Damaging)

  1. Clean the desired mounting surface thoroughly to ensure it is free of dust and grease.
  2. Peel the protective backing from one side of the included adhesive strip.
  3. Apply the adhesive strip firmly to the back of the nightlight.
  4. Peel the remaining protective backing from the adhesive strip.
  5. Press the nightlight firmly onto the cleaned surface for at least 30 seconds.

Screw Mounting (Permanent/Secure)

  1. เลือกสถานที่ติดตั้งที่เหมาะสม
  2. Use the included mounting bracket as a template to mark the screw holes on the surface.
  3. Drill pilot holes if necessary, especially for drywall or masonry, and insert the provided anchors.
  4. ยึดขายึดเข้ากับพื้นผิวโดยใช้สกรูที่ให้มา
  5. Slide the nightlight onto the mounting bracket until it clicks securely into place.
A hand holding a Mr Beams MB720 nightlight, with a ruler indicating its dimensions as approximately 3.9 inches (9 cm) in height.

Figure 2: Approximate dimensions of the MB720 nightlight, useful for placement planning.

3. คู่มือการใช้งาน

The Mr Beams MB720 nightlight is designed for automatic, hands-free operation.

Motion Sensing Activation

  • The integrated motion sensor detects movement within a range of up to 10 feet and an angle of 120 degrees.
  • The light will only activate when motion is detected in a dark environment. This feature conserves battery life by preventing activation during daylight hours.

ระบบปิดเครื่องอัตโนมัติ

Once activated, the light will remain on as long as motion is continuously detected. If no motion is detected for approximately 30 seconds, the light will automatically turn off to save power.

บันทึก: เพื่อประสิทธิภาพสูงสุด ควรตรวจสอบให้แน่ใจว่าเซ็นเซอร์ตรวจจับการเคลื่อนไหวไม่มีสิ่งกีดขวางและอยู่ในตำแหน่งที่ครอบคลุมพื้นที่ตรวจจับที่ต้องการ

4. การบำรุงรักษา

การเปลี่ยนแบตเตอรี่

When the light output diminishes or the light fails to activate, it is time to replace the batteries. Follow the battery installation steps outlined in Section 2.1. Always replace all batteries with new ones of the same type and brand for best performance.

การทำความสะอาด

To clean the nightlight, gently wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the unit. Ensure the light is dry before re-installation or use.

5 การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ไฟไม่เปิด
  • แบตเตอรี่หมดหรือติดตั้งไม่ถูกต้อง
  • Environment is too bright.
  • ไม่พบการเคลื่อนไหวภายในระยะ
  • เซ็นเซอร์ถูกกีดขวาง
  • เปลี่ยนแบตเตอรี่โดยตรวจสอบให้แน่ใจว่าใส่ขั้วถูกต้อง
  • ทดสอบในสภาพแวดล้อมที่มืดกว่า
  • Move closer to the sensor or adjust placement.
  • กำจัดสิ่งกีดขวางใดๆ ออกจากเซ็นเซอร์
ไฟติดสว่างต่อเนื่อง
  • การเคลื่อนไหวคงที่ภายในระยะการตรวจจับ
  • เซ็นเซอร์ทำงานผิดปกติ
  • ย้ายแสงไปยังพื้นที่ที่มีกิจกรรมน้อย
  • Remove and reinsert batteries. If problem persists, contact support.
แสงสว่างสลัวๆ
  • พลังงานแบตเตอรี่ต่ำ
  • เปลี่ยนแบตเตอรี่

6. ข้อมูลจำเพาะ

ฟลักซ์ส่องสว่าง20 ลูเมน
อุณหภูมิสีแสง4000K
โหมดแสงสว่างเปิดใช้งานการเคลื่อนไหว
มุมตรวจจับการเคลื่อนไหว120°
ช่วงการเคลื่อนไหวสูงถึง 15 ฟุต
ปิดอัตโนมัติ30 วินาที
พลังแบตเตอรี่ (ไม่รวม)
เงื่อนไขการใช้งาน0 - 131°F
การติดตั้งผนังหรือขาตั้ง
คะแนนสภาพอากาศIPX4
ขนาดหน่วย3.86 x 3.39 x 1.14 นิ้ว
น้ำหนักต่อหน่วย0.31 ปอนด์

7. การรับประกันและการสนับสนุน

ข้อมูลการรับประกัน

All Mr Beams products are guaranteed against defects in workmanship and materials for 1 ปีนับจากการซื้อ. Use of Mr Beams lights is subject to the terms found ที่นี่.

การสนับสนุนผลิตภัณฑ์

For more information or assistance, please visit the official Mr Beams product support page. Click ที่นี่ ถึง view more information on the Beams product support page.

(Note: Specific links for warranty terms and support page are placeholders as they were not provided in the JSON. In a real scenario, these would be replaced with actual URLส.)

เอกสารที่เกี่ยวข้อง - เอ็มบี720

พรีview คู่มือผู้ใช้ไฟสปอตไลท์แบบเคลื่อนไหว 2 หัว Mr Beams MB12984 Pro
คู่มือผู้ใช้โดยละเอียดสำหรับ Mr Beams MB12984 Pro 2-Head Motion Flood Light พร้อม Cascading Wall Wash ครอบคลุมถึงคุณลักษณะ โหมดการทำงาน การตั้งค่าที่ปรับได้ และคำแนะนำในการติดตั้ง
พรีview คู่มือการติดตั้งไฟสปอตไลท์ LED เซ็นเซอร์ตรวจจับความเคลื่อนไหวไร้สาย Mr Beams รุ่น MB380-390
คู่มือการติดตั้งสำหรับไฟสปอตไลท์ LED เซ็นเซอร์ตรวจจับความเคลื่อนไหวไร้สาย Mr Beams รุ่น MB380-390 เรียนรู้วิธีการติดตั้งและใช้งานไฟสปอตไลท์ LED ที่ทำงานด้วยระบบตรวจจับความเคลื่อนไหวนี้ เพื่อให้แสงสว่างที่มีประสิทธิภาพและทนทาน
พรีview คู่มือการติดตั้งไฟสปอตไลท์ LED สว่างพิเศษพร้อมเซ็นเซอร์ตรวจจับความเคลื่อนไหวไร้สาย Mr Beams MB380-390
คู่มือการติดตั้งสำหรับไฟสปอตไลท์ LED เซ็นเซอร์ตรวจจับความเคลื่อนไหวไร้สาย Mr Beams MB380-390 ความสว่างสูงพิเศษ โดยละเอียดเกี่ยวกับคุณสมบัติ ชิ้นส่วนที่รวมมาให้ ขั้นตอนการติดตั้ง และข้อควรระวังเกี่ยวกับแบตเตอรี่เพื่อการใช้งานอย่างเหมาะสม
พรีview คู่มือการติดตั้งไฟสปอตไลท์ LED เซ็นเซอร์ตรวจจับความเคลื่อนไหวไร้สาย Mr Beams MB330/360
คู่มือการติดตั้งแบบทีละขั้นตอนสำหรับไฟสปอตไลท์ LED เซ็นเซอร์ตรวจจับความเคลื่อนไหวไร้สาย Mr Beams MB330/360 โดยอธิบายรายละเอียดการตั้งค่า คุณสมบัติ และการเปลี่ยนแบตเตอรี่
พรีview โคมไฟเพดาน LED เซ็นเซอร์ตรวจจับความเคลื่อนไหวไร้สาย MR BEAMS MB980: คู่มือการถอดเซ็นเซอร์ไฟ
คำแนะนำทีละขั้นตอนสำหรับการถอดเซ็นเซอร์แสงออกจากโคมไฟเพดาน LED เซ็นเซอร์ตรวจจับความเคลื่อนไหวไร้สาย MR BEAMS MB980 เรียนรู้วิธีปรับแต่งประสบการณ์การใช้งานแสงสว่างของคุณ
พรีview คู่มือการติดตั้งและคุณสมบัติของไฟสปอตไลท์ LED Mr Beams MB360XT
คู่มือการติดตั้งและคุณสมบัติโดยละเอียดสำหรับไฟสปอตไลท์ LED ไร้สาย Mr Beams MB360XT เรียนรู้วิธีการติดตั้ง การใช้งาน และการบำรุงรักษาไฟส่องสว่างภายนอกอาคารที่ทำงานด้วยเซ็นเซอร์ตรวจจับความเคลื่อนไหว