1. บทนำ
This manual provides detailed instructions for the assembly, display, and care of your Revell 1:144 Rocket Hero Saturn V Rocket model kit. The Saturn V was a powerful launch vehicle used in the Apollo manned spacecraft program, including the historic mission to the lunar surface. This model allows you to recreate a scaled replica of this iconic rocket.
เนื้อหาชุด:
- Detailed service and lunar landing modules
- Three separable stages
- Launching pad display stand
- Authentic decal markings
- คำแนะนำการประกอบพร้อมภาพประกอบ
Note: Adhesive (glue) and paints are not included and must be purchased separately. Refer to the packaging for recommended types.
2. คำแนะนำในการประกอบ
Follow these steps carefully for optimal assembly. It is recommended to read through all instructions before beginning.
2.1 การเตรียมตัว
- Unpack all components and verify against the parts list provided in the kit.
- ตรวจสอบให้แน่ใจว่าคุณมีพื้นที่ทำงานที่สะอาดและมีแสงสว่างเพียงพอ
- Gather necessary tools: hobby knife, plastic cement, small files or sandpaper, and paints (if desired).
2.2 วินาทีtage-by-Stage การประกอบ
The model is designed for separate assembly of its three stages and modules, which can then be locked together. This allows for individual display or full assembly.
- เอสตัวแรกtage (S-IC): Assemble the components of the first stage according to the illustrated diagrams. Ensure all parts fit snugly before applying adhesive. Allow sufficient drying time.
- เอสที่สองtage (S-II): Proceed with the assembly of the second stage. Pay close attention to the engine details.
- เติร์ด เอสtage (S-IVB) and Instrument Unit: Assemble the third stage and the instrument unit.
- Service Module and Lunar Landing Module: Assemble these modules as per the instructions.
- Command Module: Assemble the command module.
2.3 การติดสติ๊กเกอร์
Apply the authentic decal markings after the paint (if used) has fully dried. Use water to slide decals into position and a soft cloth to gently press out air bubbles. Refer to the decal placement guide in your kit for accurate positioning.
2.4 การประกอบขั้นสุดท้าย
Once all individual stages and modules are complete and dry, carefully lock them together to form the complete Saturn V rocket. The units can be separated again for individual display.
This image shows the fully assembled Revell 1:144 Rocket Hero Saturn V Rocket model, featuring its multi-stage design and launch pad display stand.
3. การแสดงผลและการใช้งาน
Your Revell Saturn V model is designed for static display. Use the included launching pad display stand to showcase your completed model.
- Place the model on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity.
- Handle the model by its base or main body to avoid damaging delicate parts.
- Avoid dropping or subjecting the model to impacts, as this can cause parts to break or detach.
4. การบำรุงรักษา
To keep your model in excellent condition, follow these simple maintenance guidelines:
- การทำความสะอาด: Gently dust the model regularly with a soft, dry brush or a microfiber cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the paint or plastic.
- พื้นที่จัดเก็บ: If storing the model for an extended period, place it in a protective box to prevent dust accumulation and accidental damage.
- การซ่อมแซม: In case of minor damage, use appropriate plastic cement to reattach detached parts.
5 การแก้ไขปัญหา
Here are solutions to common issues encountered during model assembly:
| ปัญหา | สารละลาย |
|---|---|
| ชิ้นส่วนต่างๆ ไม่เข้ากัน | Check the instruction diagrams carefully. Use a hobby knife or file to gently trim excess plastic (flash) from the edges of the parts. Ensure parts are oriented correctly. |
| Decals do not adhere properly | Ensure the surface is clean and smooth. Use a decal setting solution to help the decal conform to the surface and improve adhesion. |
| มองเห็นรอยกาว | Apply plastic cement sparingly. If using liquid cement, use a fine brush. Avoid touching glued areas until fully dry. |
6. ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| ยี่ห้อ | เรเวล |
| หมายเลขรุ่น | RMXS5088 |
| มาตราส่วน | 1:144 น. |
| วัสดุ | พลาสติก |
| อายุที่แนะนำ | 10 ปีขึ้นไป |
| ขนาดสินค้า (กว้าง x ยาว x สูง) | 25 x 13.75 x 21.25 นิ้ว (ประกอบแล้ว) |
| น้ำหนักสินค้า | 1.8 ปอนด์ |
| ยูพีซี | 031445050886 |
7. การรับประกันและการสนับสนุน
Specific warranty information for this model kit is typically provided within the product packaging or on the manufacturer's official website. Please refer to those resources for details regarding any product guarantees or support.
For further assistance or inquiries, you may visit the official Revell store or contact their customer support directly:
