คู่มือการใช้งานอุปกรณ์ปรับแรงดันลมสำรอง SCUBAPRO Air 2

1. บทนำ

The SCUBAPRO Air 2 Alternate Inflation Regulator is a 5th generation device designed to combine the functions of a second stage regulator and a balanced inflator into a single, compact housing. This integration streamlines your diving equipment by eliminating the need for a separate alternate air source, enhancing safety and convenience underwater.

This manual provides essential information for the proper setup, operation, and maintenance of your Air 2 regulator. Adhering to these instructions will ensure optimal performance and longevity of the device.

รูปที่ 1 : ด้านหน้า view of the SCUBAPRO Air 2 Alternate Inflation Regulator.

2. การตั้งค่าและการเชื่อมต่อ

The Air 2 is designed for universal compatibility, featuring a standard 3/8" hose thread for seamless integration with most scuba setups. Proper connection is crucial for safe operation.

1. Attach the Low-Pressure Hose: Connect the supplied low-pressure hose to the Air 2 regulator. Ensure the connection is secure and hand-tightened.
2. Connect to BCD: Attach the Air 2's inflator mechanism to your Buoyancy Control Device (BCD) inflator hose.
3. ตรวจสอบการเชื่อมต่อ: Before diving, always perform a thorough check of all connections to ensure there are no leaks and all components are securely fastened.

รูปที่ 2: ด้านข้าง view of the SCUBAPRO Air 2 with the low-pressure hose connected.

รูปที่ 3: รายละเอียด view of the hose connection point on the Air 2 regulator.

3. คู่มือการใช้งาน

The Air 2 is designed for intuitive use, combining inflation/deflation controls with an alternate air source function.

3.1. เงินเฟ้อและเงินฝืด

• อัตราเงินเฟ้อ : Press the red button (inflator button) to add air to your BCD. The air-balanced power inflator valve ensures a steady stream of air.
• ภาวะเงินฝืด: Press the gray button (deflator button) to release air from your BCD. The large purge button is designed for easy operation, even with thick gloves.

3.2. Alternate Air Source Function

In an emergency out-of-air situation, the Air 2 serves as a reliable alternate air source. Its integrated design means you always know where to locate your backup regulator.

• การหายใจ: The Air 2 features a comfortable mouthpiece, allowing it to be used for breathing directly.
• Dive/Pre-Dive Switch: The Air 2 includes a fixed Venturi Initiated Vacuum Assist (VIVA) Flow Vane with a dive/pre-dive switch. This switch allows you to adjust the regulator mechanism to prevent free-flow at the surface or in strong currents, and to optimize breathing performance during a dive.

รูปที่ 4: ระยะใกล้ view of the mouthpiece, red inflator button, gray deflator button, and dive/pre-dive switch on the Air 2.

4. การบำรุงรักษา

Regular maintenance is essential to ensure the safety and performance of your SCUBAPRO Air 2 regulator.

• การล้าง: After each dive, thoroughly rinse the Air 2 with fresh water while it is still pressurized to prevent water ingress into the internal components. Once rinsed, depress the purge button briefly to clear any water from the mouthpiece.
• การอบแห้ง: Allow the regulator to air dry completely in a shaded, well-ventilated area. Avoid direct sunlight or excessive heat.
• พื้นที่จัดเก็บ: Store the Air 2 in a cool, dry place, away from direct sunlight, chemicals, and extreme temperatures.
• การบริการระดับมืออาชีพ: It is recommended to have your Air 2 regulator professionally serviced by an authorized SCUBAPRO technician annually or after every 100 dives, whichever comes first. This ensures all internal components are inspected, cleaned, and replaced as necessary.

Figure 5: The SCUBAPRO Air 2 regulator shown with its low-pressure hose detached, illustrating components for cleaning and inspection.

5 การแก้ไขปัญหา

If you encounter issues with your Air 2 regulator, consider the following common troubleshooting steps. For persistent problems, contact an authorized service center.

• Free-Flowing Regulator: If the regulator free-flows, ensure the dive/pre-dive switch is in the 'pre-dive' position when not actively breathing. Check for debris in the mouthpiece or diaphragm.
• Hard Breathing: Verify that the low-pressure hose is securely connected and that your tank has sufficient air pressure. Ensure the dive/pre-dive switch is in the 'dive' position.
• การรั่วไหล: Inspect all hose connections for tightness. Check O-rings for damage or displacement. If a leak persists, professional inspection is required.
• Inflator Malfunction: Ensure the BCD inflator mechanism is clean and free of sand or salt crystals. Check the quick-disconnect fitting for proper engagement.

6. ข้อมูลจำเพาะ

7. การรับประกันและการสนับสนุน

For warranty information, product support, or to locate an authorized service center, please refer to the official SCUBAPRO webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ในกรณีที่ต้องการเคลมประกัน