การแนะนำ
This manual provides instructions for the installation and use of the ACV 1324-45 ISO Radio Connection Cable. This adapter is designed to facilitate the installation of an aftermarket radio in compatible Audi, Seat, Skoda, and Volkswagen vehicles, specifically those requiring phantom power for the antenna and utilizing a Quadlock connector system.
คุณสมบัติผลิตภัณฑ์
- Enables the installation of a replacement car radio.
- Includes an additional adapter for connecting antenna voltage supply to car radios.
- Compatible with all models featuring a Quadlock connector.
- Specifically designed for Audi vehicles from 2012 onwards.
- Also compatible with various Seat, Skoda, and Volkswagen models.
- Constructed from copper and plastic for durability.
การติดตั้งและการตั้งค่า
The ACV 1324-45 cable simplifies the process of connecting an aftermarket car radio. Please follow these general steps for installation. Professional installation is recommended if you are unfamiliar with car audio wiring.
- การเตรียมยานพาหนะ: ตรวจสอบให้แน่ใจว่าได้ปิดสวิตช์กุญแจรถและถอดแบตเตอรี่ออกแล้ว ก่อนเริ่มงานเกี่ยวกับระบบไฟฟ้าใดๆ
- Access Radio Compartment: Carefully remove the existing car radio or blanking plate to access the vehicle's wiring harness.
- Identify Vehicle Connector: Locate the vehicle's Quadlock connector. The ACV 1324-45 cable is designed to interface with this type of connector.
- Connect ACV Adapter: Connect the ACV 1324-45 adapter's vehicle-side connector to the vehicle's existing Quadlock harness. Ensure a secure fit.
- เชื่อมต่อวิทยุหลังการขาย: Connect the other end of the ACV 1324-45 adapter to the ISO connector of your new aftermarket car radio.
- Antenna Power Connection: The adapter includes a separate wire for antenna voltage supply. Connect this wire to the corresponding antenna power output on your aftermarket radio to ensure proper antenna function, especially for phantom-powered antennas.
- การตรวจสอบสายไฟ: Double-check all connections for security and correct polarity. Some aftermarket radios or vehicle models may require minor adjustments to the power wires (e.g., swapping constant and switched 12V lines). Refer to your aftermarket radio's manual for specific wiring diagrams.
- ทดสอบฟังก์ชันการทำงาน: Reconnect the vehicle battery and test the radio's functionality, including power, audio, and antenna reception, before fully reassembling the dashboard.
รูปที่ 1: เกินview of the ACV 1324-45 ISO Radio Connection Cable, showing the main harness and phantom power adapter.
Figure 2: Detail of the Quadlock connector end of the ACV 1324-45 cable, which connects to the vehicle's wiring harness.
Figure 3: The ACV 1324-45 cable displaying both the vehicle-side Quadlock connector and the aftermarket radio's ISO connector, along with the antenna power line.
คำแนะนำการใช้งาน
Once correctly installed, the ACV 1324-45 cable functions as a passive adapter, allowing your aftermarket radio to operate as intended. There are no specific operating procedures for the cable itself. Refer to your aftermarket car radio's user manual for its operational instructions.
การซ่อมบำรุง
The ACV 1324-45 radio connection cable requires minimal maintenance. Ensure all connections remain secure and free from moisture or physical damage. Avoid bending or crimping the wires excessively during installation or when routing the cable.
การแก้ไขปัญหา
If you encounter issues after installing the ACV 1324-45 cable, consider the following:
- ไม่มีไฟฟ้าเข้าวิทยุ: Verify that the vehicle's battery is properly connected and charged. Check all fuse connections. Ensure the constant 12V (yellow wire) and switched 12V (red wire) connections are correctly aligned between the vehicle harness, the ACV adapter, and the aftermarket radio. Some installations may require swapping these wires.
- การรับสัญญาณวิทยุไม่ดี: Confirm that the antenna power wire from the ACV adapter is correctly connected to the aftermarket radio's antenna power output. This is crucial for phantom-powered antennas. Ensure the antenna itself is properly connected and undamaged.
- ไม่มีเอาต์พุตเสียง: Check all speaker wire connections for proper polarity and secure fit. Ensure the aftermarket radio is correctly configured for speaker output.
- ฟังก์ชั่นไม่ต่อเนื่อง: Inspect all connections for looseness or corrosion. Ensure the cable is not pinched or damaged.
If problems persist, consult a professional car audio installer.
ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| ยี่ห้อ | น้ำส้มสายชูหมักแอปเปิ้ล |
| หมายเลขรุ่น | 1324-45 |
| ขนาดสินค้า (กว้าง x ยาว x สูง) | 23 x 7 x 4.7 ซม. (9.06 x 2.76 x 1.85 นิ้ว) |
| น้ำหนัก | 100 กรัม (0.22 ปอนด์) |
| วัสดุ | Copper and Plastic |
| ประเภทขั้วต่อ | RF Connector (ISO to Quadlock adapter) |
| ข้อแนะนำการใช้ | Car Radio, Car Stereos |
| ASIN | B001K90KCS |
| รหัสบทความระหว่างประเทศ | 04026724006810 |
| ความพร้อมของอะไหล่ (สหภาพยุโรป) | 1 ปี |
การรับประกันและการสนับสนุน
This product is manufactured by ACV. Information regarding specific warranty terms is not provided in this manual. Please refer to your point of purchase or the manufacturer's official webเว็บไซต์สำหรับข้อมูลการรับประกันโดยละเอียด
Spare parts availability in the EU is indicated for 1 year from the date of purchase. For technical support or inquiries, please contact your retailer or ACV customer service.
