1. บทนำ
This manual provides detailed instructions for the proper installation, configuration, and operation of your Delta Dore Driver 230 CPL Electric Radiator Energy Manager. This device is designed to optimize the management of your electric heating system across up to three zones, enhancing comfort and promoting energy savings. Please read this manual thoroughly before attempting installation or operation.
2. สินค้าหมดview
The Delta Dore Driver 230 CPL is a powerline communication (CPL) energy manager for electric heating systems equipped with pilot wires. It allows for precise control of electric radiators across 1 to 3 zones. Key features include:
- Multi-Zone Control: Manages up to three independent heating zones.
- โหมดการทำงานสี่โหมด: Comfort, Eco, Frost Protection, and Stop.
- การเขียนโปรแกรมรายสัปดาห์: Customizable heating schedules in 15-minute increments.
- Absence Management: Program reduced heating during prolonged absences.
- Domestic Hot Water (DHW) Management: Controls DHW during off-peak hours.
- อินเทอร์เฟซที่เป็นมิตรกับผู้ใช้: Ambient temperature display and central dial for easy adjustments.
รูปที่ 1: ด้านหน้า view of the Delta Dore Driver 230 CPL. The display shows time and zone indicators (Z1, Z2, Z3). Control buttons for '+' and '-' adjustments, an 'OK' button, and a central rotary dial for mode selection are visible. The device also features the 'DELTA DORE' brand logo and 'DRIVER 230 CPL' model designation.
3. การตั้งค่าและการติดตั้ง
สำคัญ: For correct operation, the Driver 230 CPL requires the mandatory installation of Delta Dore CPL receivers (not included) connected to each electric radiator and a GP6 CPL load shedding device (not included). Professional installation by a qualified electrician is highly recommended.
3.1. ข้อกำหนดเบื้องต้น
- Delta Dore CPL receivers installed on each electric radiator.
- Delta Dore GP6 CPL load shedding device installed.
- 230V power supply at the installation location.
- Electric radiators with pilot wire functionality.
3.2. การติดตั้งอุปกรณ์
- Choose a suitable location on an interior wall, away from direct sunlight, heat sources, or drafts, to ensure accurate temperature readings.
- Mount the Driver 230 CPL device surface-mounted (en saillie) to the wall.
- Connect the device to a 230V power supply. The device communicates with the CPL receivers via its power connection.
3.3. การกำหนดค่าเริ่มต้น
Upon first power-up, the device may require initial setup, including time and date. Refer to the on-screen prompts and use the '+' and '-' buttons to adjust values and 'OK' to confirm.
4. การดำเนินการ
The Driver 230 CPL allows you to control your heating system through various modes and manual adjustments.
4.1. โหมดการทำงาน
Use the central rotary dial to select one of the four main operating modes:
- โหมดความสะดวกสบาย (☀): Maintains the programmed comfort temperature.
- Eco Mode (🌙): Maintains a reduced temperature, typically 3-4°C below comfort, for energy savings.
- Frost Protection Mode (❄): รักษาระดับอุณหภูมิต่ำสุด (เช่น 7°C) เพื่อป้องกันท่อน้ำแข็งตัว
- Stop Mode (Ⓒ): เครื่องทำความร้อนถูกปิดแล้ว
4.2. การปรับอุณหภูมิ
The ambient temperature is displayed on the energy manager's screen. You can modify the desired temperature either permanently or temporarily:
- Permanent Adjustment: Rotate the central dial to the desired mode, then use the '+' and '-' buttons to set the target temperature for that mode.
- การปรับชั่วคราว: While in a programmed mode, use the '+' or '-' buttons to temporarily override the current temperature. This override can be set for a duration from 15 minutes to 72 hours. The system will revert to the programmed schedule after the temporary period.
5. รายการประจำสัปดาห์
The Driver 230 CPL allows for weekly programming, enabling you to adapt your heating to your lifestyle and maximize energy savings. Programming can be set in 15-minute increments.
5.1. Accessing Programming Mode
To enter programming mode, rotate the central dial to the 'PROG' position. The display will guide you through the programming steps for each zone (Z1, Z2, Z3).
5.2. Setting Schedules
- Select the desired zone (Z1, Z2, or Z3) using the '+' or '-' buttons if prompted.
- For each day of the week, define the operating mode (Comfort, Eco, Frost Protection, Stop) for each 15-minute segment.
- Use the '+' and '-' buttons to navigate through time slots and modes.
- Press 'OK' to confirm each setting and move to the next segment or day.
- Repeat for all days and zones as required.
6. Absence Management
For prolonged absences, you can program an absence mode to reduce or turn off heating, saving energy. The system will automatically resume normal programming upon your return date.
6.1. Activating Absence Mode
- Rotate the central dial to the suitcase icon (💼) or navigate to the absence setting via the menu.
- Set the desired departure date and time using the '+' and '-' buttons.
- Set the desired return date and time.
- Choose the desired heating mode during absence (e.g., Frost Protection or Stop).
- Confirm settings with 'OK'.
7. Domestic Hot Water (DHW) Management
The Driver 230 CPL also supports the management of domestic hot water (ECS) production, typically during off-peak electricity hours, to further optimize energy consumption. Refer to your specific installation configuration for details on DHW control.
8. การบำรุงรักษา
The Delta Dore Driver 230 CPL is designed for reliable operation with minimal maintenance.
- การทำความสะอาด: Periodically wipe the device with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
- การตรวจสอบ: Ensure the device is securely mounted and that there are no visible signs of damage.
- การอัปเดตซอฟต์แวร์: Information regarding software updates is not available.
9 การแก้ไขปัญหา
If you encounter issues with your Driver 230 CPL, consider the following common solutions:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| No display/Device unresponsive | ไม่มีแหล่งจ่ายไฟ | Check the 230V power connection. Ensure circuit breaker is on. |
| Radiators not responding to commands | CPL receivers not installed or not communicating. Incorrect wiring. | Verify installation of Delta Dore CPL receivers. Consult a qualified electrician to check wiring. |
| การอ่านอุณหภูมิไม่ถูกต้อง | Device located near a heat source or draft. | Ensure the device is not exposed to direct heat or cold drafts. |
| Heating not turning off during absence mode | Absence mode not correctly programmed. | Review and re-program the absence settings (Section 6). |
หากปัญหายังคงอยู่ โปรดติดต่อฝ่ายบริการลูกค้าของ Delta Dore หรือช่างเทคนิคที่มีคุณสมบัติเหมาะสม
10. ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| ยี่ห้อ | เดลต้า โดเร |
| หมายเลขรุ่น | 6051101 |
| ประเภทสินค้า | Electric Radiator Energy Manager (CPL) |
| จำนวนโซน | 1 ถึง 3 โซน |
| แหล่งจ่ายไฟ | 230โวลต์ |
| การเขียนโปรแกรม | Weekly, 15-minute increments |
| โหมดการทำงาน | Comfort, Eco, Frost Protection, Stop |
| อุปกรณ์เสริมที่จำเป็น (ไม่รวม) | Delta Dore CPL receivers, GP6 CPL load shedding device |
| ASIN | B001FA9IDY |
| วันที่พร้อมใช้งานครั้งแรก | 22 เมษายน 2022 |
11. การสนับสนุนและการรับประกัน
For technical support, product inquiries, or warranty information, please refer to the official Delta Dore website or contact their customer service department. Specific details regarding warranty coverage and spare parts availability are not provided in the product information.
- ความพร้อมของอะไหล่: ข้อมูลไม่พร้อมใช้งาน
- รับประกันการอัปเดตซอฟต์แวร์จนถึง: ข้อมูลไม่พร้อมใช้งาน
