การแนะนำ
This manual provides essential information for the proper setup, operation, and maintenance of your Sennheiser MKE 400 Shotgun Microphone. The MKE 400 is a compact shotgun microphone designed for camcorders, offering a supercardioid lobar frequency response, switchable sensitivity, and a switchable wind noise filter. Its rugged all-metal housing ensures durability.
ข้อมูลด้านความปลอดภัย
Please read and follow all safety instructions to prevent damage to the device or injury to yourself. Keep this manual for future reference.
- อย่าวางไมโครโฟนไว้ในที่ที่มีอุณหภูมิสูง ความชื้นสูง หรือแสงแดดโดยตรง
- ควรหลีกเลี่ยงการทำไมโครโฟนตกหรือกระแทกอย่างแรง
- Do not attempt to disassemble or modify the microphone. Repairs should only be performed by authorized service personnel.
- เก็บแบตเตอรี่ให้พ้นมือเด็ก ทิ้งแบตเตอรี่ที่ใช้แล้วตามระเบียบข้อบังคับของท้องถิ่น
เนื้อหาแพ็คเกจ
ตรวจสอบให้แน่ใจว่ามีสินค้าทั้งหมดอยู่ในแพ็คเกจของคุณ:
- Sennheiser MKE 400 Shotgun Microphone
- แบตเตอรี่ AAA 1 ก้อน
- โฟมกระจกหน้ารถ
สินค้าเกินview
Familiarize yourself with the components of your MKE 400 microphone.
Figure 1: Sennheiser MKE 400 Shotgun Microphone mounted on a camcorder, showing its compact size and position.
รูปที่ 2: ด้านหลัง view of the MKE 400 microphone, highlighting the 3.5mm MIC OUT port for connecting to your camera.
รูปที่ 3: ด้านข้าง view of the MKE 400, showing the control switches for sensitivity adjustment and the wind noise filter.
รูปที่ 4: ด้านล่าง view of the MKE 400, illustrating the battery compartment for the single AAA battery.
การตั้งค่า
- การติดตั้งแบตเตอรี่:
- Locate the battery compartment on the underside of the microphone (refer to Figure 4).
- เลื่อนเปิดฝาครอบแบตเตอรี่
- ใส่แบตเตอรี่ AAA หนึ่งก้อน ตรวจสอบให้แน่ใจว่าขั้วถูกต้อง (+/-)
- ปิดฝาครอบแบตเตอรี่ให้แน่น
- การติดตั้งไมโครโฟน:
- The MKE 400 features an integral shock mount with a standard hot shoe mount. Slide the microphone onto your camera's hot shoe until it clicks into place.
- Alternatively, the microphone base includes a threaded end for mounting onto a tripod or stand.
- การเชื่อมต่อกับกล้อง:
- Connect the 3.5mm audio cable from the microphone's "MIC OUT" port (refer to Figure 2) to your camera's external microphone input.
คำแนะนำการใช้งาน
- การเปิด/ปิดเครื่อง:
- Locate the ON/OFF switch on the side of the microphone (refer to Figure 3).
- Slide the switch to the "ON" position to power on the microphone. A battery indicator light will illuminate.
- เลื่อนสวิตช์ไปที่ตำแหน่ง "ปิด" เมื่อไม่ใช้งานเพื่อประหยัดแบตเตอรี่
- ปรับความไว:
- The MKE 400 features a switchable sensitivity setting for long and short distances.
- Use the volume control switch (labeled "+ Vol -" or similar, refer to Figure 3) to adjust the microphone's input level.
- For louder sound sources or closer proximity, select a lower sensitivity setting. For quieter sources or greater distance, select a higher sensitivity setting.
- Using the Wind Noise Filter:
- The microphone includes a switchable wind noise filter to reduce unwanted ambient noise, especially in outdoor environments.
- Locate the wind noise filter switch (often labeled with a wind icon, refer to Figure 3) and activate it when needed.
- For optimal wind noise reduction, attach the included foam windshield (refer to Figure 1).
- ไฟแสดงสถานะแบตเตอรี่:
- The battery indicator light provides feedback on battery status. A steady light typically indicates sufficient power, while a flashing light may signal low battery.
การซ่อมบำรุง
- การทำความสะอาด: Use a soft, dry cloth to clean the microphone's exterior. Do not use liquid cleaners or solvents.
- การเปลี่ยนแบตเตอรี่: Replace the AAA battery when the battery indicator signals low power. Always use fresh, high-quality batteries.
- พื้นที่จัดเก็บ: Store the microphone in a dry, cool place away from direct sunlight and extreme temperatures. When storing for extended periods, remove the battery to prevent leakage.
การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| ไม่มีเสียงออก | Microphone is off; low battery; incorrect cable connection; camera input settings. | Ensure microphone is ON; replace battery; check cable connection to camera's MIC IN; verify camera's audio input settings. |
| เสียงเพี้ยน | Input level too high; microphone too close to sound source. | Reduce microphone sensitivity using the switch; increase distance from sound source. |
| เสียงลมดังเกินไป | Wind noise filter is off; no foam windshield. | Activate the wind noise filter; attach the foam windshield. |
ข้อมูลจำเพาะ
- แบบอย่าง: เอ็มเคอี 400
- รูปแบบขั้ว: Unidirectional (Supercardioid Lobar)
- แหล่งพลังงาน: แบตเตอรี่ AAA 1 ก้อน (รวมอยู่ด้วย)
- เวลาทำการ : More than 300 hours (from 1 AAA battery)
- ประเภทตัวเชื่อมต่อ: แจ็ค 3.5 มม.
- ที่อยู่อาศัย: Rugged all-metal
- ขนาด (ยาว x กว้าง x สูง): ประมาณ 0.83 x 5.12 x 2.44 นิ้ว
- น้ำหนักสินค้า: ประมาณ 9.4 ออนซ์
- อุปกรณ์ที่รองรับ: Camera (with standard hot shoe mount and external microphone input)
การรับประกันและการสนับสนุน
Sennheiser products are designed for reliability and performance. This product is covered by a manufacturer's warranty. For detailed warranty information, product registration, or technical support, please visit the official Sennheiser webเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าของพวกเขา
คุณสามารถค้นหาข้อมูลเพิ่มเติมและทรัพยากรสนับสนุนได้ที่ ร้านค้า Sennheiser บน Amazon.





