Westek SLC6CBC-4 Outdoor/Indoor Programmable Light Control User Manual

1. บทนำ

The Westek SLC6CBC-4 Programmable Light Control is designed to convert any standard light socket into an automatic, programmable light source. This device enhances safety and security by automatically turning lights on in low-light conditions. It is suitable for both indoor and outdoor applications and is compatible with LED, incandescent, and CFL bulbs up to 100 watts.

The control offers flexible scheduling options, allowing the light to turn off after a selectable duration of 2, 5, or 8 hours, or at random times to simulate occupancy.

2. คุณสมบัติของผลิตภัณฑ์

• แปลงปลั๊กไฟทั่วไปให้เป็นไฟกลางคืนอัตโนมัติ
• Works with LED, incandescent, and CFL bulbs up to 100 watts.
• Ideal for laundry rooms, garages, basements, attics, and other indoor/outdoor areas.
• Programmable off-times: 2, 5, or 8 hours.
• Random off-time feature to deter intruders.
• ไมโครโปรเซสเซอร์ในตัวเพื่อความแม่นยำในการตั้งเวลาปิด
• Compact design fits most outdoor and indoor fixtures.
• Labeled buttons for intuitive programming.
• Housing Material: Plastic.
• Connection Type: Screw-In (E26 Medium base).

3. ข้อมูลด้านความปลอดภัย

• คำเตือน: To avoid electric shock, always switch off power to the light fixture at the circuit breaker or fuse box before installation or servicing.
• อย่าให้เกินวัตต์สูงสุดtagกำลังไฟฟ้า 100 วัตต์
• Ensure the light control is installed in a location where the photocell sensor is exposed to natural light and not obstructed by the fixture or artificial light sources.
• This device is designed for use with standard E26 medium base sockets.
• Avoid using with opaque or frosted glass fixtures that may block the light sensor.

4. การตั้งค่าและการติดตั้ง

Follow these steps to install your Westek SLC6CBC-4 Programmable Light Control:

1. ปิดเครื่อง: Before beginning installation, ensure the power to the lamp or desired lighting source is switched off at the circuit breaker.
2. Screw in the control: Carefully screw the Westek SLC6CBC-4 control into the existing light socket.
3. ติดตั้งหลอดไฟ: Screw a compatible bulb (LED, incandescent, or CFL, up to 100 watts) into the light control device.
4. Position the photocell: Orient the light control so that the automatic photocell sensor faces natural light and is away from any artificial light sources that could interfere with its operation.
5. คืนพลังงาน: เปิดไฟที่เบรกเกอร์อีกครั้ง

ภาพที่ 1: ภาพระยะใกล้ view of the Westek SLC6CBC-4 Programmable Light Control, showing its screw-in base and bulb insertion port.

ภาพที่ 2: The Westek SLC6CBC-4 Programmable Light Control shown in its original retail packaging.

วิดีโอการติดตั้ง

5. คู่มือการใช้งาน

The Westek SLC6CBC-4 features a photocell sensor that automatically turns the light on when ambient light levels are low (dusk). You can program the device to turn off after a specific duration or at random times.

Programming the Timer Function:

After installation and with power restored, the device will enter its default mode (dusk to dawn, or a previously set program). To set a specific timer:

1. ค้นหาตำแหน่ง ตัวจับเวลา ปุ่มบนอุปกรณ์
2. กดปุ่ม ตัวจับเวลา button once for the light to turn off after 2 ชั่วโมง. The bulb will blink once to confirm.
3. กดปุ่ม ตัวจับเวลา button twice for the light to turn off after 5 ชั่วโมง. The bulb will blink twice to confirm.
4. กดปุ่ม ตัวจับเวลา button three times for the light to turn off after 8 ชั่วโมง. The bulb will blink three times to confirm.
5. กดปุ่ม ตัวจับเวลา button four times to set the device to dusk to dawn light sensing. The bulb will blink four times to confirm. In this mode, the light will turn on at dusk and remain on until dawn.

Random Off-Time Feature:

To activate the random off-time feature, which helps deter intruders by varying the turn-off time:

1. ค้นหาตำแหน่ง สุ่ม ปุ่มบนอุปกรณ์
2. กดปุ่ม สุ่ม button to activate this mode. The light will turn on at dusk and turn off at random intervals within a set timeframe.

6. การบำรุงรักษา

The Westek SLC6CBC-4 Programmable Light Control requires minimal maintenance. Keep the photocell sensor clean and free from obstructions (dirt, dust, leaves, snow) to ensure proper operation. Periodically check the device for any signs of damage or wear. If any damage is observed, discontinue use and replace the unit.

7 การแก้ไขปัญหา

• Light does not turn on at dusk:
  • ตรวจสอบให้แน่ใจว่าได้เปิดไฟเลี้ยงอุปกรณ์แล้ว
  • Check if the bulb is working correctly.
  • Verify that the photocell sensor is not obstructed or covered.
  • Ensure the photocell is not exposed to artificial light sources (e.g., streetlights, other lamps) that might prevent it from sensing darkness.
• Light does not turn off:
  • Check if the photocell sensor is receiving sufficient natural light (dawn).
  • Ensure no artificial light sources are shining directly onto the photocell, preventing it from sensing daylight.
  • Verify the timer setting. If set to 'dusk to dawn', it will remain on until sufficient daylight is detected.
• Light turns on/off at incorrect times:
  • Reposition the light control to ensure the photocell has an unobstructed view of natural light and is shielded from artificial light.
  • Reset the timer program by cycling through the settings.
• Bulb flickers or does not illuminate:
  • Ensure the bulb is securely screwed into the control.
  • ยืนยันหลอดไฟวัดtage ไม่เกิน 100 วัตต์
  • Test the bulb in another fixture to ensure it is functional.

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

This Westek SLC6CBC-4 Programmable Light Control comes with a การรับประกันจากผู้ผลิต 1 ปี.

For technical support or warranty claims, please contact Westek customer service. Refer to the product packaging or the official Westek webเว็บไซต์สำหรับข้อมูลการติดต่อล่าสุด