คู่มือการใช้งาน+

Tascam CD-GT2

Tascam CD-GT2 Guitar Trainer User Manual

Model: CD-GT2

การแนะนำ

This manual provides essential information for the proper setup, operation, and maintenance of your Tascam CD-GT2 Guitar Trainer. Please read this manual thoroughly before using the unit to ensure optimal performance and longevity.

ข้อมูลด้านความปลอดภัยที่สำคัญ

เนื้อหาแพ็คเกจ

ตรวจสอบว่าแพ็คเกจของคุณมีรายการต่อไปนี้:

ยูนิตโอเวอร์view

Familiarize yourself with the various parts and controls of your CD-GT2.

แผงด้านหน้าและปุ่มควบคุม

Tascam CD-GT2 top view พร้อมระบบควบคุมและจอแสดงผล

ภาพ: ด้านบน view of the Tascam CD-GT2, showing the display, control buttons (Tempo, Key, Guitar Cancel, Effect, Tuner, Loop, Play/Pause, Stop, Flash Back), cursor buttons, value buttons, and Phones Volume knob.

Side and Rear Panels

Tascam CD-GT2 side view with input/output jacks and open CD tray

ภาพ: ด้านข้าง view of the Tascam CD-GT2 with the CD tray open, showing the PHONES, LINE OUT, INPUT (GUITAR/MIC IN), and FOOT SW jacks.

Tascam CD-GT2 rear view พร้อมอินพุตพลังงาน

ภาพ: ด้านหลัง view of the Tascam CD-GT2, showing the DC IN 5V power input and the POWER button.

การตั้งค่า

  1. การเชื่อมต่อไฟฟ้า:
    • อะแดปเตอร์ AC: Connect the supplied AC adapter to the DC IN 5V jack on the rear panel and plug it into a wall outlet.
    • แบตเตอรี่: Alternatively, open the battery compartment on the bottom of the unit and insert four AA batteries, observing correct polarity.
  2. การเปิด/ปิด: Press and hold the POWER button on the rear panel for approximately 1 second.
  3. กำลังโหลดซีดี:
    1. Slide the OPEN switch to release the CD compartment lid.
    2. Place a standard audio CD onto the spindle with the label side facing up.
    3. Gently close the CD compartment lid until it clicks securely.
  4. Connecting Headphones/Ampเครื่องฟอก:
    • For private practice, connect headphones to the PHONES jack. Adjust volume using the PHONES VOLUME knob.
    • To output audio to an external amplifier or recording device, connect a cable from the LINE OUT jack.
  5. Connecting an Instrument/Microphone: Plug your guitar or a microphone into the INPUT (GUITAR/MIC IN) jack.
  6. Connecting a Footswitch (Optional): Connect a compatible footswitch to the FOOT SW jack for remote control of certain functions.

คำแนะนำการใช้งาน

การเล่นซีดีขั้นพื้นฐาน

  1. Load an audio CD as described in the Setup section.
  2. Press the PLAY/PAUSE button to start playback. The unit may take a few moments to read a new CD before starting.
  3. Use the SKIP buttons (left/right arrows) to navigate between tracks.
  4. Press the STOP button to halt playback.
  5. The FLASH BACK button allows you to quickly rewind a few seconds during playback.

การควบคุมจังหวะ

The TEMPO function allows you to slow down or speed up the CD playback without changing the pitch, ideal for learning fast passages.

  1. During CD playback, press the TEMPO button.
  2. Use the VALUE buttons (up/down arrows) to adjust the tempo percentage. A lower percentage slows down the track.
  3. Note: Significant tempo reduction (e.g., below -50%) may introduce a slight "warbling" or distortion effect, which is a characteristic of the digital processing.

Key Control (Pitch Shift)

The KEY function allows you to change the pitch of the CD playback in semitone steps without altering the tempo, useful for matching your instrument's tuning or playing in different keys.

  1. During CD playback, press the KEY button.
  2. Use the VALUE buttons to adjust the key up or down in semitone increments.
  3. Adjusting the key by a full step (+1 or -1) corresponds to a half-step in musical terms (e.g., E to E-flat).

เล่นวนซ้ำ

Use the LOOP function to repeatedly play a specific section of a song, aiding in focused practice.

  1. During CD playback, press the LOOP button at the desired start point (A).
  2. Press the LOOP button again at the desired end point (B). The section between A and B will now loop continuously.
  3. To exit loop playback, press the LOOP button a third time.

Guitar Cancel

The GUITAR CANCEL feature attempts to reduce the level of the guitar part in a CD track, making it easier to play along.

ผลกระทบ

The CD-GT2 includes various built-in effects for your guitar input.

  1. Press the EFFECT button to cycle through available effects or enter effect editing mode.
  2. Use the CURSOR and VALUE buttons to select and adjust effect parameters.
  3. It is recommended to start with preset effects before attempting extensive customization.

จูนเนอร์และเครื่องวัดจังหวะ

การซ่อมบำรุง

การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้ / วิธีแก้ไข
เครื่องไม่เปิด
  • Ensure the AC adapter is securely connected and plugged into a working outlet.
  • If using batteries, check that they are inserted correctly and are not depleted.
  • Press and hold the POWER button for at least 1 second.
CD does not play or takes a long time to start.
  • Ensure the CD is inserted correctly with the label side up and the lid is fully closed.
  • Clean the CD for smudges or scratches.
  • The unit may take a few moments to read a newly inserted CD; this is normal behavior.
Audio is distorted or "warbles" at slow tempos.This is a characteristic artifact of extreme tempo reduction in digital audio processing. It is more noticeable at very low tempo settings. Try reducing the tempo less drastically.
Guitar Cancel function is ineffective.The effectiveness of Guitar Cancel varies depending on the original recording. It works best when the guitar is isolated in the stereo mix. It may not completely remove the guitar.
Display is difficult to read.The display screen is compact. Ensure adequate lighting and adjust your viewมุมอิง
No sound from headphones/line out.
  • Check headphone/cable connections.
  • Ensure PHONES VOLUME is turned up.
  • Verify the CD is playing.

ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
ชื่อรุ่นCD-GT2
ขนาดสินค้า1.52 x 7.64 x 5.43 นิ้ว
น้ำหนักสินค้า1.21 ปอนด์
แหล่งพลังงาน4 AA batteries or DC IN 5V (AC adapter)
เทคโนโลยีการเชื่อมต่อAuxiliary (PHONES, LINE OUT, GUITAR/MIC IN, FOOT SW)
คุณสมบัติพิเศษPortable CD Guitar Trainer with Tempo/Key Control, Loop, Tuner, Metronome, Effects

ข้อมูลการรับประกัน

Specific warranty details for the Tascam CD-GT2 are typically provided with the product at the time of purchase or can be found on the official Tascam webไซต์ โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ในการเรียกร้องการรับประกัน

การสนับสนุนและการบริการ

For technical support, service, or further inquiries regarding your Tascam CD-GT2, please visit the official Tascam website or contact their customer service department. Contact information can usually be found on the Tascam webไซต์หรือในเอกสารที่รวมอยู่กับผลิตภัณฑ์ของคุณ